Re: [PATCH resend] extcon: axp288: Add wakeup support

[Chanwoo Choi <cw00.choi@samsung.com>]

On 3/24/20 6:59 AM, Hans de Goede wrote:
> On devices with an AXP288, we need to wakeup from suspend when a charger
> is plugged in, so that we can do charger-type detection and so that the
> axp288-charger driver, which listens for our extcon events, can configure
> the input-current-limit accordingly.
> 
> Cc: stable@vger.kernel.org
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  drivers/extcon/extcon-axp288.c | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
> index a7f216191493..710a3bb66e95 100644
> --- a/drivers/extcon/extcon-axp288.c
> +++ b/drivers/extcon/extcon-axp288.c
> @@ -443,9 +443,40 @@ static int axp288_extcon_probe(struct platform_device *pdev)
>  	/* Start charger cable type detection */
>  	axp288_extcon_enable(info);
>  
> +	device_init_wakeup(dev, true);
> +	platform_set_drvdata(pdev, info);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused axp288_extcon_suspend(struct device *dev)
> +{
> +	struct axp288_extcon_info *info = dev_get_drvdata(dev);
> +
> +	if (device_may_wakeup(dev))
> +		enable_irq_wake(info->irq[VBUS_RISING_IRQ]);
> +
>  	return 0;
>  }
>  
> +static int __maybe_unused axp288_extcon_resume(struct device *dev)
> +{
> +	struct axp288_extcon_info *info = dev_get_drvdata(dev);
> +
> +	/*
> +	 * Wakeup when a charger is connected to do charger-type
> +	 * connection and generate an extcon event which makes the
> +	 * axp288 charger driver set the input current limit.
> +	 */
> +	if (device_may_wakeup(dev))
> +		disable_irq_wake(info->irq[VBUS_RISING_IRQ]);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(axp288_extcon_pm_ops, axp288_extcon_suspend,
> +			 axp288_extcon_resume);
> +
>  static const struct platform_device_id axp288_extcon_table[] = {
>  	{ .name = "axp288_extcon" },
>  	{},
> @@ -457,6 +488,7 @@ static struct platform_driver axp288_extcon_driver = {
>  	.id_table = axp288_extcon_table,
>  	.driver = {
>  		.name = "axp288_extcon",
> +		.pm = &axp288_extcon_pm_ops,
>  	},
>  };
>  
> 

Applied it. Thanks.


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics