From: Suzuki K Poulose <Suzuki.Poulose@arm.com>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, coresight@lists.linaro.org,
robert.walker@arm.com, mike.leach@linaro.org
Subject: Re: [PATCH 6/6] coresight: etm-perf: Add support for ETR backend
Date: Fri, 13 Jul 2018 12:23:02 +0100 [thread overview]
Message-ID: <cf11b93e-6e57-7309-5364-6c1d00ff8381@arm.com> (raw)
In-Reply-To: <20180712205740.GA22128@xps15>
On 12/07/18 21:57, Mathieu Poirier wrote:
> Hi Suzuki,
>
> On Wed, Jul 11, 2018 at 03:16:39PM +0100, Suzuki K Poulose wrote:
>> Add support for using TMC-ETR as backend for ETM perf tracing.
>> We use software double buffering at the moment. i.e, the TMC-ETR
>> uses a separate buffer than the perf ring buffer. The data is
>> copied to the perf ring buffer once a session completes.
>>
>> The TMC-ETR would try to match the larger of perf ring buffer
>> or the ETR buffer size configured via sysfs, scaling down to
>> a minimum limit of 1MB.
>>
>> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
>> ---
>> drivers/hwtracing/coresight/coresight-tmc-etr.c | 265 +++++++++++++++++++++++-
>> drivers/hwtracing/coresight/coresight-tmc.h | 2 +
>> 2 files changed, 265 insertions(+), 2 deletions(-)
>> +/*
>> + * tmc_etr_sync_perf_buffer: Copy the actual trace data from the hardware
>> + * buffer to the perf ring buffer.
>> + */
>> +static void tmc_etr_sync_perf_buffer(struct etr_perf_buffer *etr_perf)
>> +{
>> + long bytes, to_copy;
>> + long pg_idx, pg_offset, src_offset;
>> + unsigned long head = etr_perf->head;
>> + char **dst_pages, *src_buf;
>> + struct etr_buf *etr_buf = etr_perf->etr_buf;
>> +
>> + head = PERF_IDX2OFF(etr_perf->head, etr_perf);
>
> I'm puzzled here. Since etr_perf->head is set in tmc_etr_set_perf_buffer() to
> the value of handle->head, its value is always within the range of the perf ring
IIUC, the handle->head is not necessarily guaranteed to be within the aux-ring buffer.
> buffer. In tmc_etr_alloc_perf_buffer() etr_perf->nr_pages is set to the number
> of pages present in that ring buffer. As such I'm not sure as to why we need
> the PERF_IDX2OFF() macro.
>
> It seems to me that "head = etr_perf->head;" above is sufficient.
>
We need to do the step at some point, which could be moved to set_perf_buffer.
>> + pg_idx = head >> PAGE_SHIFT;
>> + pg_offset = head & (PAGE_SIZE - 1);
>> + dst_pages = (char **)etr_perf->pages;
>> + src_offset = etr_buf->offset;
>> + to_copy = etr_buf->len;
>> +
>> + while (to_copy > 0) {
>> + /*
>> + * We can copy minimum of :
>
> s/We can copy minimum of :/In one iteration we can copy a minimum of:/
>
> If I'm wrong about the PERF_IDX2OFF(), don't bother respinning just for that.
I have some more fixes for handling the different modes (sysfs vs perf),
which I can include in the v2.
Suzuki
next prev parent reply other threads:[~2018-07-13 11:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-11 14:16 [PATCH 0/6] coresight: perf: Support for tmc-etr backed buffers Suzuki K Poulose
2018-07-11 14:16 ` [PATCH 1/6] coresight: Fix handling of sinks Suzuki K Poulose
2018-07-11 14:16 ` [PATCH 2/6] coresight: tmc-etr: Handle driver mode specific ETR buffers Suzuki K Poulose
2018-07-11 14:16 ` [PATCH 3/6] coresight: tmc-etr: Relax collection of trace from sysfs mode Suzuki K Poulose
2018-07-11 14:16 ` [PATCH 4/6] coresight: Convert driver messages to dev_dbg Suzuki K Poulose
2018-07-11 14:16 ` [PATCH 5/6] coresight: perf: Remove reset_buffer call back for sinks Suzuki K Poulose
2018-07-11 14:16 ` [PATCH 6/6] coresight: etm-perf: Add support for ETR backend Suzuki K Poulose
2018-07-12 20:57 ` Mathieu Poirier
2018-07-13 11:23 ` Suzuki K Poulose [this message]
2018-07-16 15:05 ` Mathieu Poirier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cf11b93e-6e57-7309-5364-6c1d00ff8381@arm.com \
--to=suzuki.poulose@arm.com \
--cc=coresight@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=mike.leach@linaro.org \
--cc=robert.walker@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®