From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: leo.yan@linaro.org, acme@kernel.org, mathieu.poirier@linaro.org,
mike.leach@linaro.org, peterz@infradead.org, mingo@redhat.com,
mark.rutland@arm.com, alexander.shishkin@linux.intel.com,
jolsa@redhat.com, namhyung@kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4] perf test: Introduce script for Arm CoreSight testing
Date: Wed, 12 Aug 2020 17:59:55 +0100 [thread overview]
Message-ID: <cf57e876-3645-53f0-6333-ecb6ce3597d5@arm.com> (raw)
In-Reply-To: <20200806070213.7386-1-leo.yan@linaro.org>
Hi Leo,
On 08/06/2020 08:02 AM, Leo Yan wrote:
> We need a simple method to test Perf with Arm CoreSight drivers, this
> could be used for smoke testing when new patch is coming for perf or
> CoreSight drivers, and we also can use the test to confirm if the
> CoreSight has been enabled successfully on new platforms.
>
> This patch introduces the shell script test_arm_coresight.sh which is
> under the 'pert test' framework. This script provides three testing
> scenarios:
Thank you for this testcase. It is a very good tool for people
check their system for CoreSight driver functionality.
>
> Test scenario 1: traverse all possible paths between source and sink
>
> For traversing possible paths, simply to say, the testing rationale
> is source oriented testing, it traverses every source (now only refers
> to ETM device) and test its all possible sinks. To search the complete
> paths from one specific source to its sinks, this patch relies on the
> sysfs '/sys/bus/coresight/devices/devX/out:Y' for depth-first search
> (DFS) for iteration connected device nodes, if the output device is
> detected as one of ETR, ETF, or ETB types then it will test trace data
Please see my suggestion below, to use "enable_sink" as an indicator
for a sink device.
> recording and decoding for this PMU device.
>
> The script runs three output testings for every trace data:
> - Test branch samples dumping with 'perf script' command;
> - Test branch samples reporting with 'perf report' command;
> - Use option '--itrace=i1000i' to insert synthesized instructions events
> and the script will check if perf can output the percentage value
> successfully based on the instruction samples.
>
> Test scenario 2: CPU wide mode test
> > For CPU wide mode testing, it passes option '-a' to perf tool to enable
> tracing on all CPUs, so it's hard to say which program will be traced.
Isn't this system-wide, when you trace all CPUs ? In CPU wide mode,
you specify a list of CPUs (-C ?). I always get confused here.
> But perf tool itself contributes much overload in this case, so it will
> parse trace data and check if process 'perf' can be detected or not.
>
> diff --git a/tools/perf/tests/shell/test_arm_coresight.sh b/tools/perf/tests/shell/test_arm_coresight.sh
> new file mode 100755
> index 000000000000..73b973bada26
> --- /dev/null
> +++ b/tools/perf/tests/shell/test_arm_coresight.sh
> @@ -0,0 +1,172 @@
> +#!/bin/sh
> +# Check Arm CoreSight trace data recording and branch samples
> +
> +# Uses the 'perf record' to record trace data with Arm CoreSight sinks;
> +# then verify if there have any branch samples and instruction samples
> +# are generated by CoreSight with 'perf script' and 'perf report'
> +# commands.
> +
> +# SPDX-License-Identifier: GPL-2.0
> +# Leo Yan <leo.yan@linaro.org>, 2020
> +
> +perfdata=$(mktemp /tmp/__perf_test.perf.data.XXXXX)
> +file=$(mktemp /tmp/temporary_file.XXXXX)
> +
> +skip_if_no_cs_etm_event() {
> + perf list | grep -q 'cs_etm//' && return 0
> +
> + # cs_etm event doesn't exist
> + return 2
> +}
> +
> +skip_if_no_cs_etm_event || exit 2
> +
> +record_touch_file() {
> + echo "Recording trace (only user mode) with path: CPU$2 => $1"
> + perf record -o ${perfdata} -e cs_etm/@$1/u --per-thread \
> + -- taskset -c $2 touch $file
> +}
> +
> +perf_script_branch_samples() {
> + echo "Looking at perf.data file for dumping branch samples:"
> +
> + # Below is an example of the branch samples dumping:
> + # touch 6512 1 branches:u: ffffb220824c strcmp+0xc (/lib/aarch64-linux-gnu/ld-2.27.so)
> + # touch 6512 1 branches:u: ffffb22082e0 strcmp+0xa0 (/lib/aarch64-linux-gnu/ld-2.27.so)
> + # touch 6512 1 branches:u: ffffb2208320 strcmp+0xe0 (/lib/aarch64-linux-gnu/ld-2.27.so)
> + perf script -F,-time -i ${perfdata} | \
> + egrep " +$1 +[0-9]+ .* +branches:([u|k]:)? +"
> +}
> +
> +perf_report_branch_samples() {
> + echo "Looking at perf.data file for reporting branch samples:"
> +
> + # Below is an example of the branch samples reporting:
> + # 73.04% 73.04% touch libc-2.27.so [.] _dl_addr
> + # 7.71% 7.71% touch libc-2.27.so [.] getenv
> + # 2.59% 2.59% touch ld-2.27.so [.] strcmp
> + perf report --stdio -i ${perfdata} | \
> + egrep " +[0-9]+\.[0-9]+% +[0-9]+\.[0-9]+% +$1 "
> +}
> +
> +perf_report_instruction_samples() {
> + echo "Looking at perf.data file for instruction samples:"
> +
> + # Below is an example of the instruction samples reporting:
> + # 68.12% touch libc-2.27.so [.] _dl_addr
> + # 5.80% touch libc-2.27.so [.] getenv
> + # 4.35% touch ld-2.27.so [.] _dl_fixup
> + perf report --itrace=i1000i --stdio -i ${perfdata} | \
> + egrep " +[0-9]+\.[0-9]+% +$1"
> +}
> +
> +arm_cs_iterate_devices() {
> + for dev in $1/connections/out\:*; do
> +
> + # Skip testing if it's not a directory
> + ! [ -d $dev ] && continue;
> +
> + # Read out its symbol link file name
> + path=`readlink -f $dev`
> +
> + # Extract device name from path, e.g.
> + # path = '/sys/devices/platform/20010000.etf/tmc_etf0'
> + # `> device_name = 'tmc_etf0'
> + device_name=`echo $path | awk -F/ '{print $(NF)}'`
> +
> + echo $device_name | egrep -q "etr|etb|etf"
Could we check for the existence of "enable_sink" instead, for detecting
if this is a sink device ? That way, we are covered for future cases of
a new sink type, and is more reliable.
> +
> + # Only test if the output device is ETR/ETB/ETF
> + if [ $? -eq 0 ]; then
> +
> + pmu_dev="/sys/bus/event_source/devices/cs_etm/sinks/$device_name"
> +
> + # Exit if PMU device node doesn't exist
> + if ! [ -f $pmu_dev ]; then
> + echo "PMU device $pmu_dev doesn't exist"
Misleading output. $pmu_dev is not a PMU device. Instead, it is one of
the supported sinks by the PMU.
> + exit 1
> + fi
> +
> + record_touch_file $device_name $2 &&
> + perf_script_branch_samples touch &&
> + perf_report_branch_samples touch &&
> + perf_report_instruction_samples touch
> +
> + err=$?
> +
> + # Exit when find failure
> + [ $err != 0 ] && exit $err
> +
> + rm -f ${perfdata}
> + rm -f ${file}
> + fi
> +
> + arm_cs_iterate_devices $dev $2
> + done
> +}
> +
> +arm_cs_etm_traverse_path_test() {
> + # Iterate for every ETM device
> + for dev in /sys/bus/coresight/devices/etm*; do
> +
> + # Find the ETM device belonging to which CPU
> + cpu=`cat $dev/cpu`
> +
> + echo $dev
> + echo $cpu
> +
> + # Use depth-first search (DFS) to iterate outputs
> + arm_cs_iterate_devices $dev $cpu
> + done
> +}
> +
> +arm_cs_etm_cpu_wide_test() {
> + echo "Recording trace with CPU wide mode"
> + perf record -o ${perfdata} -e cs_etm// -a -- ls
> +
> + perf_script_branch_samples perf &&
> + perf_report_branch_samples perf &&
> + perf_report_instruction_samples perf
> +
> + err=$?
> +
> + # Exit when find failure
> + [ $err != 0 ] && exit $err
> +
> + rm -f ${perfdata}
> + rm -f ${file}
> +}
> +
> +arm_cs_etm_snapshot_test() {
> + echo "Recording trace with snapshot mode"
> + perf record -o ${perfdata} -e cs_etm// -S --per-thread \
> + -- dd if=/dev/zero of=/dev/null &
As far as I understand, --per-thread option is not needed anymore
for normal tracing (irrespective of whether your application is
multi-threaded or not)
> + PERFPID=$!
> +
> + # Wait for perf program
> + sleep 1
> +
> + # Send signal to snapshot trace data
> + kill -USR2 $PERFPID
> +
> + # Stop perf program
> + kill $PERFPID
> + wait $PERFPID
> +
> + perf_script_branch_samples dd &&
> + perf_report_branch_samples dd &&
> + perf_report_instruction_samples dd
> +
> + err=$?
> +
> + # Exit when find failure
> + [ $err != 0 ] && exit $err
> +
> + rm -f ${perfdata}
> + rm -f ${file}
> +}
> +
> +arm_cs_etm_traverse_path_test
> +arm_cs_etm_cpu_wide_test
> +arm_cs_etm_snapshot_test
> +exit 0
>
Rest looks OK to me.
Cheers
Suzuki
next prev parent reply other threads:[~2020-08-12 16:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-06 7:02 Leo Yan
2020-08-12 16:12 ` Mathieu Poirier
2020-08-12 16:59 ` Suzuki K Poulose [this message]
2020-08-13 0:11 ` Leo Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cf57e876-3645-53f0-6333-ecb6ce3597d5@arm.com \
--to=suzuki.poulose@arm.com \
--cc=acme@kernel.org \
--cc=alexander.shishkin@linux.intel.com \
--cc=jolsa@redhat.com \
--cc=leo.yan@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathieu.poirier@linaro.org \
--cc=mike.leach@linaro.org \
--cc=mingo@redhat.com \
--cc=namhyung@kernel.org \
--cc=peterz@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®