Re: kernel oops and panic in acpi_atomic_read under 2.6.39.3. call trace included

[rick@microway.com]

Hi Huang,

The original system needs to ship to our customer ASAP.  Disabling ghes is
sufficient for the time being for that.  As such, I have set up an
identical system as a temporary master for another cluster to continue
this testing.

I have applied your patch.  Here is the output of dmesg | grep GHES so far:


[    9.272198] GHES: gar mapped: 0, 0xbf7b5ff0
[    9.280782] GHES: gar mapped: 0, 0xbf7b6200
[    9.285102] [Firmware Warn]: GHES: Poll interval is 0 for generic
hardware error source: 1, disabled.

I have the serial console activated and stress tests started back up. 
I'll reply with the output once I get another panic.

Thanks!
Rick

> Hi, Rick,
>
> It appears that panic occurs in acpi_atomic_read.  I think the most
> likely cause is that the acpi_generic_address is not pre-mapped.  Can
> you try the patch attached?
>
> It will print registers mapped and accessed.  To use it, run the
> following command line before workload.
>
> dmesg | grep GHES
>
> Then try to find something like
>
> GHES: gar accessed: x, xxxx
>
> in kernel log when panic occurs.
>
> Best Regards,
> Huang Ying
>
>