mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Ahern <dsahern@gmail.com>
To: Andrea Righi <andrea.righi@canonical.com>,
	"David S. Miller" <davem@davemloft.net>,
	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>,
	David Ahern <dsahern@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Ahmed Abdelsalam <ahabdels@gmail.com>,
	Andrea Mayer <andrea.mayer@uniroma2.it>
Subject: Re: [PATCH] ipv6: fix NULL pointer dereference in ip6_output()
Date: Tue, 7 Dec 2021 08:51:13 -0700	[thread overview]
Message-ID: <cfedb3e3-746a-d052-b3f1-09e4b20ad061@gmail.com> (raw)
In-Reply-To: <20211206163447.991402-1-andrea.righi@canonical.com>

[ cc a few SR6 folks ]

On 12/6/21 9:34 AM, Andrea Righi wrote:
> It is possible to trigger a NULL pointer dereference by running the srv6
> net kselftest (tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh):
> 
> [  249.051216] BUG: kernel NULL pointer dereference, address: 0000000000000378
> [  249.052331] #PF: supervisor read access in kernel mode
> [  249.053137] #PF: error_code(0x0000) - not-present page
> [  249.053960] PGD 0 P4D 0
> [  249.054376] Oops: 0000 [#1] PREEMPT SMP NOPTI
> [  249.055083] CPU: 1 PID: 21 Comm: ksoftirqd/1 Tainted: G            E     5.16.0-rc4 #2
> [  249.056328] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
> [  249.057632] RIP: 0010:ip6_forward+0x53c/0xab0
> [  249.058354] Code: 49 c7 44 24 20 00 00 00 00 48 83 e0 fe 48 8b 40 30 48 3d 70 b2 b5 81 0f 85 b5 04 00 00 e8 7c f2 ff ff 41 89 c5 e9 17 01 00 00 <44> 8b 93 78 03 00 00 45 85 d2 0f 85 92 fb ff ff 49 8b 54 24 10 48
> [  249.061274] RSP: 0018:ffffc900000cbb30 EFLAGS: 00010246
> [  249.062042] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8881051d3400
> [  249.063141] RDX: ffff888104bda000 RSI: 00000000000002c0 RDI: 0000000000000000
> [  249.064264] RBP: ffffc900000cbbc8 R08: 0000000000000000 R09: 0000000000000000
> [  249.065376] R10: 0000000000000040 R11: 0000000000000000 R12: ffff888103409800
> [  249.066498] R13: ffff8881051d3410 R14: ffff888102725280 R15: ffff888103525000
> [  249.067619] FS:  0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000
> [  249.068881] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  249.069777] CR2: 0000000000000378 CR3: 0000000104980000 CR4: 0000000000750ee0
> [  249.070907] PKRU: 55555554
> [  249.071337] Call Trace:
> [  249.071730]  <TASK>
> [  249.072070]  ? debug_smp_processor_id+0x17/0x20
> [  249.072807]  seg6_input_core+0x2bb/0x2d0
> [  249.073436]  ? _raw_spin_unlock_irqrestore+0x29/0x40
> [  249.074225]  seg6_input+0x3b/0x130
> [  249.074768]  lwtunnel_input+0x5e/0xa0
> [  249.075357]  ip_rcv+0x17b/0x190
> [  249.075867]  ? update_load_avg+0x82/0x600
> [  249.076514]  __netif_receive_skb_one_core+0x86/0xa0
> [  249.077231]  __netif_receive_skb+0x15/0x60
> [  249.077843]  process_backlog+0x97/0x160
> [  249.078389]  __napi_poll+0x31/0x170
> [  249.078912]  net_rx_action+0x229/0x270
> [  249.079506]  __do_softirq+0xef/0x2ed
> [  249.080085]  run_ksoftirqd+0x37/0x50
> [  249.080663]  smpboot_thread_fn+0x193/0x230
> [  249.081312]  kthread+0x17a/0x1a0
> [  249.081847]  ? smpboot_register_percpu_thread+0xe0/0xe0
> [  249.082677]  ? set_kthread_struct+0x50/0x50
> [  249.083340]  ret_from_fork+0x22/0x30
> [  249.083926]  </TASK>
> [  249.090295] ---[ end trace 1998d7ba5965a365 ]---
> 
> It looks like commit 0857d6f8c759 ("ipv6: When forwarding count rx stats
> on the orig netdev") tries to determine the right netdev to account the
> rx stats, but in this particular case it's failing and the netdev is
> NULL.
> 
> Fallback to the previous method of determining the netdev interface (via
> skb->dev) to account the rx stats when the orig netdev can't be
> determined.
> 
> Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev")
> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
> ---
>  net/ipv6/ip6_output.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
> index ff4e83e2a506..7ca4719ff34c 100644
> --- a/net/ipv6/ip6_output.c
> +++ b/net/ipv6/ip6_output.c
> @@ -472,6 +472,9 @@ int ip6_forward(struct sk_buff *skb)
>  	u32 mtu;
>  
>  	idev = __in6_dev_get_safely(dev_get_by_index_rcu(net, IP6CB(skb)->iif));
> +	if (unlikely(!idev))
> +		idev = __in6_dev_get_safely(skb->dev);
> +

We need to understand why iif is not set - or set to an invalid value.


>  	if (net->ipv6.devconf_all->forwarding == 0)
>  		goto error;
>  
> 


  reply	other threads:[~2021-12-07 15:51 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-06 16:34 Andrea Righi
2021-12-07 15:51 ` David Ahern [this message]
2021-12-08  0:21   ` Andrea Mayer
2021-12-08  0:50     ` David Ahern
2021-12-08 10:51       ` Florian Westphal
2021-12-08 15:46         ` David Ahern
2021-12-08 16:34           ` Stephen Suryaputra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cfedb3e3-746a-d052-b3f1-09e4b20ad061@gmail.com \
    --to=dsahern@gmail.com \
    --cc=ahabdels@gmail.com \
    --cc=andrea.mayer@uniroma2.it \
    --cc=andrea.righi@canonical.com \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®