Linux version 2.6.9-rc2-bk2 (sandro@prosecco) (gcc version 3.3.4 (Debian 1:3.3.4-11)) #1 Thu Sep 16 10:07:10 CEST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)
 BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)
 BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 261952
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 32576 pages, LIFO batch:7
DMI present.
ACPI: RSDP (v000 SONY                                      ) @ 0x000f53f0
ACPI: RSDT (v001   SONY       F1 0x20040607 MSFT 0x00000097) @ 0x3ff40000
ACPI: FADT (v002   SONY       F1 0x20040607 MSFT 0x00000097) @ 0x3ff40200
ACPI: OEMB (v001   SONY       F1 0x20040607 MSFT 0x00000097) @ 0x3ff50040
ACPI: DSDT (v001   SONY       F1 0x20040607 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1595.340 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1035632k/1047808k available (1501k kernel code, 11588k reserved, 705k data, 116k init, 130304k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3162.11 BogoMIPS (lpj=1581056)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000
CPU: After vendor identify, caps:  afe9fbbf 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps:        afe9fbbf 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Level Trigger.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f3690
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x425a, dseg 0xf0000
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0xcf8-0xcff could not be reserved
PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 4 (level, low) -> IRQ 4
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:02:01.2[C] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
ACPI: PCI interrupt 0000:02:01.3[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:02:04.1[B] -> GSI 9 (level, low) -> IRQ 9
ACPI: PCI interrupt 0000:02:04.2[C] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 9 (level, low) -> IRQ 9
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1095441980.4294967284:0): initialized
highmem bounce pool size: 64 pages
Initializing Cryptographic API
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU1] (supports C1 C2, 8 throttling states)
ACPI: Thermal Zone [ATF0] (51 C)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 7 (level, low) -> IRQ 7
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HITACHI_DK23FA-60, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITAUJ-820D, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 17
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices: 
P0P2 MLAN GLAN NUB0 NUB1 NEUB  EC0 MODM USB1 USB2 USB3 EHCI PWRB 
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 116k freed
kjournald starting.  Commit interval 5 seconds
NET: Registered protocol family 1
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Adding 2228680k swap on /dev/hda3.  Priority:-1 extents:1
EXT3 FS on hda2, internal journal
Real Time Clock Driver v1.12
cpufreq: CPU0 - ACPI performance management activated.
cpufreq:  P0: 1600 MHz, 21000 mW, 10 uS
cpufreq:  P1: 1600 MHz, 21000 mW, 10 uS
cpufreq:  P2: 1600 MHz, 21000 mW, 10 uS
cpufreq:  P3: 1600 MHz, 21000 mW, 10 uS
cpufreq: *P4: 1600 MHz, 21000 mW, 10 uS
cpufreq:  P5: 1400 MHz, 18500 mW, 10 uS
cpufreq:  P6: 1200 MHz, 15500 mW, 10 uS
cpufreq:  P7: 1000 MHz, 13000 mW, 10 uS
cpufreq:  P8: 800 MHz, 10000 mW, 10 uS
cpufreq:  P9: 600 MHz, 7500 mW, 10 uS
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NTFS driver 2.1.17 [Flags: R/O MODULE].
NTFS volume version 3.1.
input: PS/2 Generic Mouse on isa0060/serio1
ts: Compaq touchscreen protocol output
input: PC Speaker
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xe0000000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 9, io base 0000e800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 4 (level, low) -> IRQ 4
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 4, io base 0000e880
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 7 (level, low) -> IRQ 7
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 7, io base 0000ec00
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using address 2
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 3 (level, low) -> IRQ 3
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 3, pci mem f895ac00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb 2-1: USB disconnect, address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: PCI interrupt 0000:02:04.2[C] -> GSI 7 (level, low) -> IRQ 7
ehci_hcd 0000:02:04.2: NEC Corporation USB 2.0
ehci_hcd 0000:02:04.2: irq 7, pci mem f8962400
ehci_hcd 0000:02:04.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:04.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
usb 2-1: new low speed USB device using address 3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49577 usecs
intel8x0: clocking to 48000
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ALSA sound/pci/ac97/ac97_codec.c:1999: MC'97 1 converters and GPIO not ready (0xff00)
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 9 (level, low) -> IRQ 9
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=215.00 Mhz, System=230.00 MHz
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: Hitachi TX39D89VC WXGA  
radeonfb: detected LVDS panel size from BIOS: 1280x800
radeondb: BIOS provided dividers will be used
radeonfb: Power Management enabled for Mobility chipsets
radeonfb: ATI Radeon \a  DDR SGRAM 64 MB
Console: switching to colour frame buffer device 160x50
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 9 (level, low) -> IRQ 9
Yenta: CardBus bridge found at 0000:02:01.0 [104d:818f]
Yenta: ISA IRQ mask 0x0c40, PCI irq 9
Socket status: 30000006
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:02:01.2[C] -> GSI 3 (level, low) -> IRQ 3
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3]  MMIO=[ff6fe800-ff6fefff]  Max Packet=[2048]
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:02:04.0: NEC Corporation USB
ohci_hcd 0000:02:04.0: irq 9, pci mem f8b4a000
ohci_hcd 0000:02:04.0: new USB bus registered, assigned bus number 6
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:02:04.1[B] -> GSI 9 (level, low) -> IRQ 9
ohci_hcd 0000:02:04.1: NEC Corporation USB (#2)
ohci_hcd 0000:02:04.1: irq 9, pci mem f8b4c000
ohci_hcd 0000:02:04.1: new USB bus registered, assigned bus number 7
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 9 (level, low) -> IRQ 9
e100: eth0: e100_probe: addr 0xff6f6000, irq 9, MAC addr 08:00:46:D9:CE:4C
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460301a541df]
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
lp: driver loaded but no devices found
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
cs: IO port probe 0x0100-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
SCSI subsystem initialized
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.3
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV250 5c61 [Radeon Mobility 9200 M9+]
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Loading R200 Microcode
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
sonypi: Sony Programmable I/O Controller Driver v1.23.
sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
Sony VAIO Jog Dial installed.