From: Aryix <aryix@softhome.net>
To: linux-kernel@vger.kernel.org
Subject: via82cxxx probable incorrect detection (urgency=low)........
Date: Thu, 12 Dec 2002 08:14:53 -0300 [thread overview]
Message-ID: <courier.3DF9A5CE.00001047@softhome.net> (raw)
I am Argentino <- i don't speak english, please be patient
Kernel-2.4.20-final
lspci -vvv
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8
a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step
ping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot
-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
cat /proc/pci
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 33).
Bus 0, device 7, function 1:
IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 16).
Master Capable. Latency=32.
I/O at 0xd000 [0xd00f].
dmesg
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <- is my error?
VP_IDE: VIA vt82c686a (rev 21) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLlct20 30, ATA DISK drive
hdc: ST36421A, ATA DISK drive
hdd: ATAPI 44X CDROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c030a5c4, I/O limit 4095Mb (mask 0xffffffff)
hda: 58633344 sectors (30020 MB) w/418KiB Cache, CHS=3649/255/63, (U)DMA <- ??????????
blk: queue c030a928, I/O limit 4095Mb (mask 0xffffffff)
hdc: 12596850 sectors (6450 MB) w/256KiB Cache, CHS=13330/15/63, UDMA(66) <- this is ok
hdd: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) <- ok!
i have a chip via82c686a (Epox 7-kxa)
at boot time is been detected via82c686a
proc says via82c586b
lspci -vvv no says
the udma capabilities is not work propetly i set manually with "hdparm -m 8 -W 1 -X udma5 /dev/hda"
whats happening here?
--
/root/.gnupg/pubring.gpg
------------------------
pub 1024D/BE8E00BE 2002-12-06 Aryix Berius (nothing.........) <aryix@softhome.net>
Key fingerprint = 249D C5BC 8B9A C46A C7F4 397D 2A6D 9FF6 BE8E 00BE
sub 2048g/C1C6CB29 2002-12-06
next reply other threads:[~2002-12-13 9:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-12 11:14 Aryix [this message]
2002-12-14 10:28 ` Vojtech Pavlik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=courier.3DF9A5CE.00001047@softhome.net \
--to=aryix@softhome.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome