[PATCH v2 0/3] nvmem: s32g-ocotp: Add driver for S32G OCOTP

[Dan Carpenter <dan.carpenter@linaro.org>]

This driver provides a way to access the On Chip One-Time Programmable
Controller (OCOTP) on the s32g chipset.  There are three versions of this
chip but they're compatible.

v2:
I have fixed everything that people pointed out about version 1.

Sorry, Rob and Krzysztof, for the problems with the device tree YAML
file.  I had an issue with my dtschema installation and it's fixed now.

I also screwed up the From headers in v1.  I called git format-patch
without passing the --from argument.  I've fixed my scripts so that
won't happen again.  I also messed up the Signed-off by lines in patch
1 and 2.  Sorry!

My other mistakes were from not being a familiar enough with the
subsystem and those are addressed as well.  Especially re-writing the
driver using keepouts cut down a lot of lines of code.  I've tested it
and the results are the same before and after.

Ciprian Costea (2):
  dt-bindings: nvmem: Add the nxp,s32g-ocotp yaml file
  nvmem: s32g-ocotp: Add driver for S32G OCOTP

Dan Carpenter (1):
  arm64: dts: s32g: Add device tree information for the OCOTP driver

 .../bindings/nvmem/nxp,s32g-ocotp-nvmem.yaml  |  45 ++++++++
 arch/arm64/boot/dts/freescale/s32g2.dtsi      |   7 ++
 arch/arm64/boot/dts/freescale/s32g3.dtsi      |   7 ++
 drivers/nvmem/Kconfig                         |  10 ++
 drivers/nvmem/Makefile                        |   2 +
 drivers/nvmem/s32g-ocotp-nvmem.c              | 101 ++++++++++++++++++
 6 files changed, 172 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/nxp,s32g-ocotp-nvmem.yaml
 create mode 100644 drivers/nvmem/s32g-ocotp-nvmem.c

-- 
2.47.2