From: Nora Schiffer <nora.schiffer@ew.tq-group.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Kees Cook <kees@kernel.org>,
Tony Luck <tony.luck@intel.com>,
"Guilherme G. Piccoli" <gpiccoli@igalia.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux@ew.tq-group.com,
Nora Schiffer <nora.schiffer@ew.tq-group.com>
Subject: [PATCH v6 0/2] TQ-Systems TQMa62xx SoM and MBa62xx board
Date: Mon, 2 Mar 2026 11:14:57 +0100 [thread overview]
Message-ID: <cover.1772443991.git.nora.schiffer@ew.tq-group.com> (raw)
This adds Device Trees for our AM62x-based SoM TQMa62xx and its
reference carrier board MBa62xx.
Not yet included are overlays to enable LVDS display output and MIPI-CSI
camera input.
Changed in v6:
- Update author information following name change
- Rebase onto latest ti-k3-dts-next
- Disable incomplete panel node
- Add various comments to explain why nodes are disabled
- Extend comment explaining disabled 1400MHz OPP
- Use consistent comment style for pinmux
Changes in v5:
- Rebase onto latest ti-k3-dts-next
Changes in v4:
- Rebase onto latest ti-k3-dts-next
- Reorder boot phase tags after other standard DT properties
- Add missing supply regulators in SPI-NOR flash and USB hub
- Set status = "okay" in &cpsw3g, as it is disabled in k3-am62-main.dtsi
now
- Add disabled 1400MHz OPP entry (will be enabled by bootloader if
supported by PMIC configuration)
- Update copyright years in new files
Changes in v3:
- Rebased onto ti-k3-dt-for-v6.18
- 3 of the 5 patches in v2 have been applied already and are dropped
- Include k3-am62-ti-ipc-firmware.dtsi, drop now redundant configuration
- Change node name for MCU reserved memory to 'memory'
- Use rgmii-id PHY mode
- Drop now redundant ti,rx-internal-delay
- Update simple-audio-card,name to match other TQ SOMs with compatible
configuration
- Reference dss_pins in dss node (actual display support will be added
in a follow-up patch series)
- Consistently use GPIO_ACTIVE_HIGH define
- Drop unneeded usb0 quirk flags
- Add boot phase tags
Changes in v2:
- Collected acks and reviews
- Rebased onto v6.13-rc1
Nora Schiffer (2):
dt-bindings: arm: ti: Add compatible for AM625-based TQMa62xx SOM
family and carrier board
arm64: dts: ti: Add TQ-Systems TQMa62xx SoM and MBa62xx carrier board
Device Trees
.../devicetree/bindings/arm/ti/k3.yaml | 7 +
arch/arm64/boot/dts/ti/Makefile | 1 +
.../boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts | 1034 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi | 360 ++++++
4 files changed, 1402 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/
next reply other threads:[~2026-03-02 10:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-02 10:14 Nora Schiffer [this message]
2026-03-02 10:14 ` [PATCH v6 1/2] dt-bindings: arm: ti: Add compatible for AM625-based TQMa62xx SOM family and carrier board Nora Schiffer
2026-03-02 10:14 ` [PATCH v6 2/2] arm64: dts: ti: Add TQ-Systems TQMa62xx SoM and MBa62xx carrier board Device Trees Nora Schiffer
2026-03-17 9:08 ` [PATCH v6 0/2] TQ-Systems TQMa62xx SoM and MBa62xx board Nora Schiffer
2026-04-01 11:22 ` Nora Schiffer
2026-05-05 14:04 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1772443991.git.nora.schiffer@ew.tq-group.com \
--to=nora.schiffer@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gpiccoli@igalia.com \
--cc=kees@kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@ew.tq-group.com \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=tony.luck@intel.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®