From: Andrei-Alexandru Bleortu <me@andrei-z.com>
To: Jeff Johnson <jjohnson@kernel.org>
Cc: <ath11k@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<linux-wireless@vger.kernel.org>
Subject: [PATCH ath-next 0/5] wifi: ath11k: WMI services debugfs and HE AP fixes
Date: Sun, 4 Oct 2026 14:18:02 +0300 [thread overview]
Message-ID: <cover.1791111135.2.git.me@andrei-z.com> (raw)
A debugfs file listing the firmware's WMI services, and fixes for an
ath11k HE AP found by checking it against IEEE Std 802.11-2024, each
tested on a QCN9074:
1. debugfs: wmi_services lists the services the firmware advertises.
Earlier posted in the airtime fairness series, now split by tree;
since v2 the commit message no longer claims to match ath10k's
output.
2. Probe Responses during a channel switch carried the initial count:
ath11k never counted down mac80211's CSA counter (as ath12k does).
3. Without spatial reuse parameters, an AP enabled non-SRG OBSS PD at
-62 dBm; it now stays off, as in ath12k.
4. A 6 GHz AP never sent its per-20 MHz power limits to firmware (the
TPC command was station only); it now does as an LPI AP, as in
ath12k.
5. The hardware DSCP-TID tables used the class selector bits, while
cfg80211 maps DSCP to UP per RFC 8325 section 4; checked on air
through the firmware's per-TID peer statistics (CS1->1, AF21->3,
EF->6, CS6->7).
None of them depends on the mac80211 series sent alongside.
The patches by me were written with an AI coding assistant (Claude
Code), which also drafted the changelogs; the testing described was done
on the hardware.
v2 of patch 1: https://lore.kernel.org/all/20261003155542.96363-2-me@andrei-z.com/
Andrei-Alexandru Bleortu (5):
wifi: ath11k: add a debugfs file listing the firmware WMI services
wifi: ath11k: count down channel switch announcements in mac80211
wifi: ath11k: leave OBSS PD off when spatial reuse is not configured
wifi: ath11k: set the 6 GHz transmit power limits of an AP
wifi: ath11k: map DSCP to TID as cfg80211 does by default
drivers/net/wireless/ath/ath11k/core.h | 2 ++
drivers/net/wireless/ath/ath11k/debugfs.c | 15 +++++++++++
drivers/net/wireless/ath/ath11k/hal_tx.c | 30 +++++++++++-----------
drivers/net/wireless/ath/ath11k/mac.c | 31 +++++++++++++++--------
drivers/net/wireless/ath/ath11k/wmi.c | 23 +++++++++++++----
5 files changed, 71 insertions(+), 30 deletions(-)
base-commit: f49defea7668d8c68ec19fa085ef3da6075561c7
--
2.47.3
next reply other threads:[~2026-10-04 11:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-04 11:18 Andrei-Alexandru Bleortu [this message]
2026-10-04 11:18 ` [PATCH ath-next 1/5] wifi: ath11k: add a debugfs file listing the firmware WMI services Andrei-Alexandru Bleortu
2026-10-04 11:18 ` [PATCH ath-next 2/5] wifi: ath11k: count down channel switch announcements in mac80211 Andrei-Alexandru Bleortu
2026-10-04 11:18 ` [PATCH ath-next 3/5] wifi: ath11k: leave OBSS PD off when spatial reuse is not configured Andrei-Alexandru Bleortu
2026-10-04 11:18 ` [PATCH ath-next 4/5] wifi: ath11k: set the 6 GHz transmit power limits of an AP Andrei-Alexandru Bleortu
2026-10-04 11:18 ` [PATCH ath-next 5/5] wifi: ath11k: map DSCP to TID as cfg80211 does by default Andrei-Alexandru Bleortu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1791111135.2.git.me@andrei-z.com \
--to=me@andrei-z.com \
--cc=ath11k@lists.infradead.org \
--cc=jjohnson@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®