From: John Garry <john.garry@huawei.com>
To: Anurup M <anurupvasu@gmail.com>, Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arm-kernel@lists.infradead.org>, <anurup.m@huawei.com>,
<linux-kernel@vger.kernel.org>, <mark.rutland@arm.com>,
<shyju.pv@huawei.com>, <gabriele.paoloni@huawei.com>,
<will.deacon@arm.com>, <linuxarm@huawei.com>,
<xuwei5@hisilicon.com>, <zhangshaokun@hisilicon.com>,
<sanil.kumar@hisilicon.com>, <tanxiaojun@huawei.com>,
<shiju.jose@huawei.com>
Subject: Re: [PATCH v1 03/11] drivers: soc: hisi: Add support for Hisilicon Djtag driver
Date: Wed, 9 Nov 2016 09:06:14 +0000 [thread overview]
Message-ID: <d009dcdc-2258-ed6a-53be-2211c7493051@huawei.com> (raw)
In-Reply-To: <5821F491.1010603@gmail.com>
>>>> I'd suggest requiring #address-cells=<1> and #size-cells=<0> in the
>>>> master
>>>> node, and listing the children by reg property. If the address is not
>>>> easily expressed as a single integer, use a larger #address-cells
>>>> value.
>>> We already have something equivalent to reg in "module-id" (see patch
>>> 02/11), which is the slave device bus address; here's a sample:
>>> + /* For L3 cache PMU */
>>> + pmul3c0 {
>>> + compatible = "hisilicon,hisi-pmu-l3c-v1";
>>> + scl-id = <0x02>;
>>> + num-events = <0x16>;
>>> + num-counters = <0x08>;
>>> + module-id = <0x04>;
>>> + num-banks = <0x04>;
>>> + cfgen-map = <0x02 0x04 0x01 0x08>;
>>> + counter-reg = <0x170>;
>>> + evctrl-reg = <0x04>;
>>> + event-en = <0x1000000>;
>>> + evtype-reg = <0x140>;
>>> + };
>>>
>>> FYI, "module-id" is our own internal hw nomenclature.
>> Yes, that was my interpretation as well. Please use the standard
>> "reg" property for this then.
> Hi Arnd,
>
> Firstly my apologies for a mistake in the bindings example in ([PATCH
> 02/11 ..]).
> The module-id property is a list as defined in the PMU bindings patch
> ([PATCH v1 05/11] dt-bindings .. <https://lkml.org/lkml/2016/11/2/323>).
>
> + djtag0: djtag@0 {
> + compatible = "hisilicon,hip05-cpu-djtag-v1";
> + pmul3c0 {
> + compatible = "hisilicon,hisi-pmu-l3c-v1";
> + scl-id = <0x02>;
> + num-events = <0x16>;
> + num-counters = <0x08>;
> + module-id = <0x04 0x04 0x04 0x04>;
> + num-banks = <0x04>;
> + cfgen-map = <0x02 0x04 0x01 0x08>;
> + counter-reg = <0x170>;
> + evctrl-reg = <0x04>;
> + event-en = <0x1000000>;
> + evtype-reg = <0x140>;
> + };
>
>
> The L3 cache in hip05/06/07 chips consist of 4 banks (each bank has PMU
> registers).
>
> In hip05/06 all L3 cache banks are identified with same module-id.
> module-id = <0x04 0x04 0x04 0x04>;
>
> But in the case hip07 chip(djtag v2), each L3 cache bank has different
> module-id
> module-id = <0x01 0x02 0x03 0x04>;
>
> So in this case Please share your opinion on how to model it.
>
My suggestion is to have a single PMU per module, whether that is 4
banks or 1 bank per module, as this makes the driver simpler.
I think you mentioned that a separate PMU per bank does not make much
sense, and you would rather treat all banks as a single bank and
aggregrate their perf statstics under a single PMU: Can you just use a
script in userspace which can do this aggregration work if you have
separate PMUs?
Maybe perf guys have a view on this also.
John
> Some more detail of L3 cache PMU.
> ------------------------------------------------
> The hip05/06/07 chips consists of a multiple Super CPU cluster (16 CPU
> cores). we call it SCCL.
> The L3 cache( 4 banks) is shared by all CPU cores in a SCCL.
> Each L3 cache bank has PMU registers. We always take the sum of the
> counters to show in perf.
> Taking individual L3 cache count is not meaningful as there is no
> mapping of CPU cores to individual
> L3 cache banks.
>
> Please share your suggestion.
>
> Thanks,
> Anurup
next prev parent reply other threads:[~2016-11-09 9:08 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-02 15:42 [PATCH v1 00/11] perf: arm64: Support for Hisilicon SoC Hardware event counters Anurup M
2016-11-02 15:42 ` [PATCH v1 01/11] arm64: MAINTAINERS: hisi: Add hisilicon SoC PMU support Anurup M
2016-11-02 15:42 ` [PATCH v1 02/11] dt-bindings: hisi: Add Hisilicon HiP05/06/07 Sysctrl and Djtag dts bindings Anurup M
2016-11-02 15:42 ` [PATCH v1 03/11] drivers: soc: hisi: Add support for Hisilicon Djtag driver Anurup M
2016-11-03 1:59 ` kbuild test robot
2016-11-07 13:26 ` Arnd Bergmann
2016-11-07 14:15 ` John Garry
2016-11-07 20:08 ` Arnd Bergmann
2016-11-08 11:23 ` John Garry
2016-11-08 11:45 ` Arnd Bergmann
2016-11-08 13:49 ` John Garry
2016-11-08 15:10 ` Arnd Bergmann
2016-11-08 15:17 ` John Garry
2016-11-09 10:44 ` Anurup M
2016-11-08 15:51 ` Anurup M
2016-11-09 9:06 ` John Garry [this message]
2016-11-11 10:35 ` Anurup M
2016-11-08 7:02 ` Tan Xiaojun
2016-11-08 7:38 ` Anurup M
2016-11-08 11:43 ` Arnd Bergmann
2016-11-08 13:46 ` Anurup M
2016-11-08 15:08 ` Arnd Bergmann
2016-11-09 4:28 ` Anurup M
2016-11-09 21:40 ` Arnd Bergmann
2016-11-11 10:23 ` Anurup M
2016-11-02 15:42 ` [PATCH v1 04/11] Documentation: perf: hisi: Documentation for HIP05/06/07 PMU event counting Anurup M
2016-11-02 15:42 ` [PATCH v1 05/11] dt-bindings: perf: hisi: Add Devicetree bindings for Hisilicon SoC PMU Anurup M
2016-11-02 15:42 ` [PATCH v1 06/11] perf: hisi: Update Kconfig for Hisilicon PMU support Anurup M
2016-11-02 15:42 ` [PATCH v1 07/11] perf: hisi: Add support for Hisilicon SoC event counters Anurup M
2016-11-02 15:42 ` [PATCH v1 08/11] perf: hisi: Add sysfs attributes for L3 cache(L3C) PMU Anurup M
2016-11-02 15:42 ` [PATCH v1 09/11] perf: hisi: Miscellanous node(MN) event counting in perf Anurup M
2016-11-02 15:42 ` [PATCH v1 10/11] perf: hisi: Support for Hisilicon DDRC PMU Anurup M
2016-11-02 15:42 ` [PATCH v1 11/11] dts: arm64: hip06: Add Hisilicon SoC PMU support Anurup M
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d009dcdc-2258-ed6a-53be-2211c7493051@huawei.com \
--to=john.garry@huawei.com \
--cc=anurup.m@huawei.com \
--cc=anurupvasu@gmail.com \
--cc=arnd@arndb.de \
--cc=gabriele.paoloni@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mark.rutland@arm.com \
--cc=sanil.kumar@hisilicon.com \
--cc=shiju.jose@huawei.com \
--cc=shyju.pv@huawei.com \
--cc=tanxiaojun@huawei.com \
--cc=will.deacon@arm.com \
--cc=xuwei5@hisilicon.com \
--cc=zhangshaokun@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®