Re: [PATCH v4 2/2] drm/bridge: Add pixel clock check in atomic_check

[Jayesh Choudhary <j-choudhary@ti.com>]

Hello Maxime,

On 30/05/24 15:04, Maxime Ripard wrote:
> Hi,
> 
> On Thu, May 30, 2024 at 02:59:30PM GMT, Jayesh Choudhary wrote:
>> Check the pixel clock for the mode in atomic_check and ensure that
>> it is within the range supported by the bridge.
>>
>> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
>> ---
>>   drivers/gpu/drm/bridge/sii902x.c | 6 ++++++
>>   1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
>> index 6a6055a4ccf9..1bf2f14a772d 100644
>> --- a/drivers/gpu/drm/bridge/sii902x.c
>> +++ b/drivers/gpu/drm/bridge/sii902x.c
>> @@ -494,6 +494,12 @@ static int sii902x_bridge_atomic_check(struct drm_bridge *bridge,
>>   				       struct drm_crtc_state *crtc_state,
>>   				       struct drm_connector_state *conn_state)
>>   {
>> +	if (crtc_state->mode.clock < SII902X_MIN_PIXEL_CLOCK_KHZ)
>> +		return MODE_CLOCK_LOW;
>> +
>> +	if (crtc_state->mode.clock > SII902X_MAX_PIXEL_CLOCK_KHZ)
>> +		return MODE_CLOCK_HIGH;
>> +
> 
> atomic_check doesn't return drm_mode_status but regular error codes (0
> on success, negative error code on failure)

Okay.

Will club together both conditions and return -EINVAL.

Warm Regards,
Jayesh

> 
> Maxime