From: John David Anglin <dave.anglin@bell.net>
To: Helge Deller <deller@gmx.de>, Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-parisc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kbuild@vger.kernel.org,
Nick Desaulniers <ndesaulniers@google.com>
Subject: Re: [PATCH] linux/export: fix reference to exported functions for parisc64
Date: Tue, 12 Sep 2023 09:20:05 -0400 [thread overview]
Message-ID: <d04d6acf-ad2c-e93d-9927-f1e937c7f1e5@bell.net> (raw)
In-Reply-To: <2eb1f861-d66f-edb3-17cd-84c90d92083d@gmx.de>
Hi Helge,
It occurs consistently on my c8000 but I'm having difficulty bisecting it. Trying a bisect
with --first-parent.
Note I had to pull ATI graphics card from the machine as it started to malfunction causing crashes.
However, v6.1.52 boots fine.
Dave
On 2023-09-12 9:01 a.m., Helge Deller wrote:
> Hi Masahiro,
>
> I can confirm as well, that your patch
> linux/export: fix reference to exported functions for parisc64
> does indeed fix the boot issue on parisc64.
>
> I did tested it on a C3000 workstation on top of Linus' v6.6-rc1 git tree.
> You may add:
> Tested-by: Helge Deller <deller@gmx.de>
>
> Dave, I don't see the issue you mention below...
>
> Helge
>
> On 9/10/23 23:30, John David Anglin wrote:
>> Hi Masahiro,
>>
>> The attached change fixed boot at ddb5cdbafaaa 😁
>>
>> However, v6.5.x boot is still broken:
>>
>> Run /init as init process
>> process '/usr/bin/sh' started with executable stack
>> Loading, please wait...
>> Starting systemd-udevd version 254.1-3
>> e1000 alternatives: applied 0 out of 569 patches
>> e1000: Intel(R) PRO/1000 Network Driver
>> e1000: Copyright (c) 1999-2006 Intel Corporation.
>> scsi_mod alternatives: applied 0 out of 7 patches
>> SCSI subsystem initialized
>> usbcore alternatives: applied 0 out of 18 patches
>> usbcore: registered new interface driver usbfs
>> libata alternatives: applied 0 out of 3 patches
>> usbcore: registered new interface driver hub
>> usbcore: registered new device driver usb
>> mptbase alternatives: applied 0 out of 73 patches
>> ehci_hcd alternatives: applied 0 out of 114 patches
>> sata_sil24 alternatives: applied 0 out of 56 patches
>> Fusion MPT base driver 3.04.20
>> Copyright (c) 1999-2008 LSI Corporation
>> sata_sil24 0000:00:01.0: Applying completion IRQ loss on PCI-X errata fix
>> scsi host0: sata_sil24
>> scsi host1: sata_sil24
>> pata_sil680 0000:60:02.0: sil680: 133MHz clock.
>> scsi host2: sata_sil24
>> ehci_pci alternatives: applied 0 out of 2 patches
>> ohci_hcd alternatives: applied 0 out of 144 patches
>> ehci-pci 0000:60:01.2: EHCI Host Controller
>> scsi host3: pata_sil680
>> ehci-pci 0000:60:01.2: new USB bus registered, assigned bus number 1
>> scsi host4: sata_sil24
>> ata1: SATA max UDMA/100 host m128@0xffffffff80088000 port 0xffffffff80080000 ir6
>> ata2: SATA max UDMA/100 host m128@0xffffffff80088000 port 0xffffffff80082000 ir6
>> ata3: SATA max UDMA/100 host m128@0xffffffff80088000 port 0xffffffff80084000 ir6
>> ata4: SATA max UDMA/100 host m128@0xffffffff80088000 port 0xffffffff80086000 ir6
>> e1000 0000:60:03.0 eth0: (PCI:33MHz:32-bit) 00:11:0a:31:8a:77
>> ehci-pci 0000:60:01.2: irq 71, io mem 0xffffffffb00a1000
>> scsi host5: pata_sil680
>> ata5: PATA max UDMA/133 cmd 0x26058 ctl 0x26064 bmdma 0x26040 irq 72
>> ata6: PATA max UDMA/133 cmd 0x26050 ctl 0x26060 bmdma 0x26048 irq 72
>> e1000 0000:60:03.0 eth0: Intel(R) PRO/1000 Network Connection
>> ehci-pci 0000:60:01.2: USB 2.0 started, EHCI 0.95
>> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
>> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> usb usb1: Product: EHCI Host Controller
>> usb usb1: Manufacturer: Linux 6.5.2-dirty ehci_hcd
>> usb usb1: SerialNumber: 0000:60:01.2
>> hub 1-0:1.0: USB hub found
>> hub 1-0:1.0: 5 ports detected
>> ata1: SATA link down (SStatus 0 SControl 0)
>> ata2: SATA link down (SStatus 0 SControl 0)
>> ata3: SATA link down (SStatus 0 SControl 0)
>> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
>> ata4.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133
>> ata4.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>> ata4.00: configured for UDMA/100
>> scsi 4:0:0:0: Direct-Access ATA ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5
>> ata6.00: ATAPI: HL-DT-STDVD+-RW GSA-H21L, 1.04, max UDMA/44
>> scsi 5:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H21L 1.04 PQ: 0 ANSI: 5
>> random: crng init done
>> Timed out for waiting the udev queue being empty.
>> Begin: Loading essential drivers ... done.
>> Begin: Running /scripts/init-premount ... done.
>> Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
>> Begin: Running /scripts/local-premount ... done.
>> Timed out for waiting the udev queue being empty.
>> Begin: Waiting for root file system ... Begin: Running /scripts/local-block ....
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> Begin: Running /scripts/local-block ... done.
>> done.
>> Gave up waiting for root file system device. Common problems:
>> - Boot args (cat /proc/cmdline)
>> - Check rootdelay= (did the system wait long enough?)
>> - Missing modules (cat /proc/modules; ls /dev)
>> ALERT! LABEL=ROOT does not exist. Dropping to a shell!
>> Rebooting automatically due to panic= boot argument
>>
>> I'll see if I can find the commit that breaks 6.5.
>>
>> Thanks,
>> Dave
>>
>> On 2023-09-10 3:47 a.m., Masahiro Yamada wrote:
>>> Hi John, Helge,
>>>
>>> Could you test the attached patch please?
>>>
>>>
>>> Again, I only tested compilation for this.
>>> I do not have parisc64 hardware.
>>> In my understanding, QEMU does not support hppa64.
>>> I do not find a way to test parisc64.
>>>
>>>
>>> Masahiro Yamada
>>>
>>>
>>>
>>>
>>>
>>> On Sun, Sep 10, 2023 at 4:20 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
>>>> With a little more investigation,
>>>> I found arch/parisc/kernel/parisc_ksyms.c
>>>> is causing the issue.
>>>>
>>>> That file is a collection of EXPORT_SYMBOL
>>>> of assembly code.
>>>>
>>>> I will take a closer look tomorrow.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Sun, Sep 10, 2023 at 2:20 AM Masahiro Yamada <masahiroy@kernel.org> wrote:
>>>>> On Fri, Sep 8, 2023 at 7:02 AM John David Anglin <dave.anglin@bell.net> wrote:
>>>>>> On 2023-09-05 7:59 p.m., John David Anglin wrote:
>>>>>>> On 2023-09-05 5:57 p.m., John David Anglin wrote:
>>>>>>>> I'll check ddb5cdbafaaa.
>>>>>>> Similar fault with ddb5cdbafaaa:
>>>>>> The alignment of the __kstrtab_ symbols in vmlinux seems wrong.
>>>>> __kstrtab_ symbols do not need alignment.
>>>>>
>>>>> They were not aligned at all
>>>>> before ddb5cdbafaaa^.
>>>>>
>>>>>
>>>>>
>>>>>> I'm fairly certain that function
>>>>>> references prefixed with P% on hppa64 need 8 byte alignment.
>>>>> Yeah.
>>>>> In the following dump, all of __ksymtab_* are correctly 8-byte aligned.
>>>>>
>>>>>
>>>>>> 81662: 0000000040ea4358 0 NOTYPE LOCAL DEFAULT 16 __kstrtab_system[...]
>>>>>> 81663: 0000000040ea4748 0 NOTYPE LOCAL DEFAULT 16 __kstrtabns_syst[...]
>>>>>> 81664: 0000000040e8e830 0 NOTYPE LOCAL DEFAULT 14 __ksymtab_system[...]
>>>>>> 81665: 0000000040ea4365 0 NOTYPE LOCAL DEFAULT 16 __kstrtab_static[...]
>>>>>> 81666: 0000000040ea4748 0 NOTYPE LOCAL DEFAULT 16 __kstrtabns_stat[...]
>>>>>> 81667: 0000000040ea1640 0 NOTYPE LOCAL DEFAULT 15 __ksymtab_static[...]
>>>>>> 81668: 0000000040ea437c 0 NOTYPE LOCAL DEFAULT 16 __kstrtab_reset_[...]
>>>>>> 81669: 0000000040ea4748 0 NOTYPE LOCAL DEFAULT 16 __kstrtabns_rese[...]
>>>>>> 81670: 0000000040e8bbc0 0 NOTYPE LOCAL DEFAULT 14 __ksymtab_reset_[...]
>>>>>> 81671: 0000000040ea438a 0 NOTYPE LOCAL DEFAULT 16 __kstrtab_loops_[...]
>>>>>> 81672: 0000000040ea4748 0 NOTYPE LOCAL DEFAULT 16 __kstrtabns_loop[...]
>>>>>> 81673: 0000000040e86610 0 NOTYPE LOCAL DEFAULT 14 __ksymtab_loops_[...]
>>>>>> 81674: 0000000040ea439a 0 NOTYPE LOCAL DEFAULT 16 __kstrtab_init_uts_ns
>>>>>> 81675: 0000000040ea4748 0 NOTYPE LOCAL DEFAULT 16 __kstrtabns_init[...]
>>>>>> 81676: 0000000040e99180 0 NOTYPE LOCAL DEFAULT 15 __ksymtab_init_uts_ns
>>>>>> 81677: 0000000040ea43a6 0 NOTYPE LOCAL DEFAULT 16 __kstrtab_name_t[...]
>>>>>> 81678: 0000000040ea4748 0 NOTYPE LOCAL DEFAULT 16 __kstrtabns_name[...]
>>>>>> 81679: 0000000040e9b340 0 NOTYPE LOCAL DEFAULT 15 __ksymtab_name_t[...]
>>>>>> 81680: 0000000040ea43b4 0 NOTYPE LOCAL DEFAULT 16 __kstrtab_wait_f[...]
>>>>>> 81681: 0000000040ea4748 0 NOTYPE LOCAL DEFAULT 16 __kstrtabns_wait[...]
>>>>>> 81682: 0000000040ea3638 0 NOTYPE LOCAL DEFAULT 15 __ksymtab_wait_f[...]
>>>>>> 81683: 0000000040ea43c7 0 NOTYPE LOCAL DEFAULT 16 __kstrtab_init_task
>>>>>> [...]
>>>>>>
>>>>>> I'm not sure how we get symbols that aren't 8 byte aligned. The ".balign 4" directive
>>>>>> in __KSYMTAB doesn't seem correct but it's not the whole problem.
>>>>>>
>>>>>> Dave
>
--
John David Anglin dave.anglin@bell.net
next prev parent reply other threads:[~2023-09-12 13:20 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-05 19:08 Masahiro Yamada
2023-09-05 21:57 ` John David Anglin
2023-09-05 23:59 ` John David Anglin
2023-09-07 22:02 ` John David Anglin
2023-09-09 17:20 ` Masahiro Yamada
2023-09-09 19:20 ` Masahiro Yamada
2023-09-10 7:47 ` Masahiro Yamada
2023-09-10 21:30 ` John David Anglin
2023-09-12 13:01 ` Helge Deller
2023-09-12 13:20 ` John David Anglin [this message]
2023-09-12 14:05 ` Helge Deller
2023-09-12 14:53 ` John David Anglin
2023-09-12 21:53 ` John David Anglin
2023-09-13 17:58 ` John David Anglin
2023-09-13 21:22 ` John David Anglin
2023-09-13 23:45 ` Damien Le Moal
2023-09-14 0:29 ` John David Anglin
2023-09-14 0:45 ` Damien Le Moal
2023-09-14 1:15 ` Damien Le Moal
2023-09-14 2:24 ` Damien Le Moal
2023-09-14 15:07 ` John David Anglin
2023-09-14 21:59 ` Damien Le Moal
2023-09-05 22:14 ` John David Anglin
[not found] ` <1MbRk3-1q6Cp42Bcv-00bwDk@mail.gmx.net>
2023-09-09 17:15 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d04d6acf-ad2c-e93d-9927-f1e937c7f1e5@bell.net \
--to=dave.anglin@bell.net \
--cc=deller@gmx.de \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-parisc@vger.kernel.org \
--cc=masahiroy@kernel.org \
--cc=ndesaulniers@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®