From: quic_neeraju <quic_neeraju@quicinc.com>
To: <paulmck@kernel.org>
Cc: <josh@joshtriplett.org>, <rostedt@goodmis.org>,
<mathieu.desnoyers@efficios.com>, <jiangshanlai@gmail.com>,
<joel@joelfernandes.org>, <rcu@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <urezki@gmail.com>,
<frederic@kernel.org>, <boqun.feng@gmail.com>
Subject: Re: [PATCH] rcu-tasks: Inspect stalled task's trc state in locked state
Date: Wed, 10 Nov 2021 10:10:27 +0530 [thread overview]
Message-ID: <d099f078-eef7-1c44-7086-b67971218f3f@quicinc.com> (raw)
In-Reply-To: <20211109145235.GV641268@paulmck-ThinkPad-P17-Gen-1>
Hi Paul,
On 11/9/2021 8:22 PM, Paul E. McKenney wrote:
> On Tue, Nov 09, 2021 at 04:52:14PM +0530, Neeraj Upadhyay wrote:
>> On RCU tasks trace stall, inspect the RCU-tasks-trace specific
>> states of stalled task in locked down state, using try_invoke_
>> on_locked_down_task(), to get reliable trc state of a non-running
>> stalled task.
>>
>> Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
>
> Queued for further review and testing, thank you!
>
> Along those lines, what did you do to test this? I would like to
> add that to the commit message. (The usual approach is to use the
> rcutorture.stall_cpu module parameter, in case I have not yet passed
> that along.)
>
Before sending the patch, I had tested with TRACE01 and adding long
delay before rcu_read_unlock_trace() in tasks_tracing_torture_read_unlock()
static void tasks_tracing_torture_read_unlock(int idx)
{
rcu_read_unlock_trace();
}
I retested with below commandline (without adding delay in
tasks_tracing_torture_read_unlock()):
tools/testing/selftests/rcutorture/bin/kvm.sh --cpus 8 --configs TRACE01
--bootargs "rcutorture.torture_type=tasks-tracing
rcutorture.stall_cpu=10 rcutorture.stall_cpu_block=1
rcupdate.rcu_task_stall_timeout=100" --trust-make
With this, I can see stalls for both RUNNING and WAITING state task:
[ 21.520291] INFO: rcu_tasks_trace detected stalls on tasks:
[ 21.521292] P85: ... nesting: 1N cpu: 2
[ 21.521966] task:rcu_torture_sta state:D stack:15080 pid: 85 ppid:
2 flags:0x00004000
[ 21.523384] Call Trace:
[ 21.523808] __schedule+0x273/0x6e0
[ 21.524428] schedule+0x35/0xa0
[ 21.524971] schedule_timeout+0x1ed/0x270
[ 21.525690] ? del_timer_sync+0x30/0x30
[ 21.526371] ? rcu_torture_writer+0x720/0x720
[ 21.527106] rcu_torture_stall+0x24a/0x270
[ 21.527816] kthread+0x115/0x140
[ 21.528401] ? set_kthread_struct+0x40/0x40
[ 21.529136] ret_from_fork+0x22/0x30
[ 21.529766] 1 holdouts
[ 21.632300] INFO: rcu_tasks_trace detected stalls on tasks:
[ 21.632345] rcu_torture_stall end.
[ 21.633293] P85: .
[ 21.633294] task:rcu_torture_sta state:R running task
stack:15080 pid: 85 ppid: 2 flags:0x00004000
[ 21.633299] Call Trace:
[ 21.633301] ? vprintk_emit+0xab/0x180
[ 21.633306] ? vprintk_emit+0x11a/0x180
[ 21.633308] ? _printk+0x4d/0x69
[ 21.633311] ? __default_send_IPI_shortcut+0x1f/0x40
Thanks
Neeraj
> Thanx, Paul
>
>> ---
>> kernel/rcu/tasks.h | 43 ++++++++++++++++++++++++++++++++++---------
>> 1 file changed, 34 insertions(+), 9 deletions(-)
>>
>> diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
>> index e4a32db9f712..4e49b847971b 100644
>> --- a/kernel/rcu/tasks.h
>> +++ b/kernel/rcu/tasks.h
>> @@ -1073,25 +1073,50 @@ static void rcu_tasks_trace_postscan(struct list_head *hop)
>> // Any tasks that exit after this point will set ->trc_reader_checked.
>> }
>>
>> +/* Communicate task state back to the RCU tasks trace stall warning request. */
>> +struct trc_stall_chk_rdr {
>> + int nesting;
>> + int ipi_to_cpu;
>> + u8 needqs;
>> +};
>> +
>> +static bool trc_check_slow_task(struct task_struct *t, void *arg)
>> +{
>> + struct trc_stall_chk_rdr *trc_rdrp = arg;
>> +
>> + if (task_curr(t))
>> + return false; // It is running, so decline to inspect it.
>> + trc_rdrp->nesting = READ_ONCE(t->trc_reader_nesting);
>> + trc_rdrp->ipi_to_cpu = READ_ONCE(t->trc_ipi_to_cpu);
>> + trc_rdrp->needqs = READ_ONCE(t->trc_reader_special.b.need_qs);
>> + return true;
>> +}
>> +
>> /* Show the state of a task stalling the current RCU tasks trace GP. */
>> static void show_stalled_task_trace(struct task_struct *t, bool *firstreport)
>> {
>> int cpu;
>> + struct trc_stall_chk_rdr trc_rdr;
>> + bool is_idle_tsk = is_idle_task(t);
>>
>> if (*firstreport) {
>> pr_err("INFO: rcu_tasks_trace detected stalls on tasks:\n");
>> *firstreport = false;
>> }
>> - // FIXME: This should attempt to use try_invoke_on_nonrunning_task().
>> cpu = task_cpu(t);
>> - pr_alert("P%d: %c%c%c nesting: %d%c cpu: %d\n",
>> - t->pid,
>> - ".I"[READ_ONCE(t->trc_ipi_to_cpu) >= 0],
>> - ".i"[is_idle_task(t)],
>> - ".N"[cpu >= 0 && tick_nohz_full_cpu(cpu)],
>> - READ_ONCE(t->trc_reader_nesting),
>> - " N"[!!READ_ONCE(t->trc_reader_special.b.need_qs)],
>> - cpu);
>> + if (!try_invoke_on_locked_down_task(t, trc_check_slow_task, &trc_rdr))
>> + pr_alert("P%d: %c\n",
>> + t->pid,
>> + ".i"[is_idle_tsk]);
>> + else
>> + pr_alert("P%d: %c%c%c nesting: %d%c cpu: %d\n",
>> + t->pid,
>> + ".I"[trc_rdr.ipi_to_cpu >= 0],
>> + ".i"[is_idle_tsk],
>> + ".N"[cpu >= 0 && tick_nohz_full_cpu(cpu)],
>> + trc_rdr.nesting,
>> + " N"[!!trc_rdr.needqs],
>> + cpu);
>> sched_show_task(t);
>> }
>>
>> --
>> 2.17.1
>>
next prev parent reply other threads:[~2021-11-10 4:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-09 11:22 Neeraj Upadhyay
2021-11-09 14:52 ` Paul E. McKenney
2021-11-10 4:40 ` quic_neeraju [this message]
2021-11-10 19:55 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d099f078-eef7-1c44-7086-b67971218f3f@quicinc.com \
--to=quic_neeraju@quicinc.com \
--cc=boqun.feng@gmail.com \
--cc=frederic@kernel.org \
--cc=jiangshanlai@gmail.com \
--cc=joel@joelfernandes.org \
--cc=josh@joshtriplett.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=paulmck@kernel.org \
--cc=rcu@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=urezki@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®