mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Noralf Trønnes" <noralf@tronnes.org>
To: Andy Shevchenko <andy.shevchenko@gmail.com>,
	David Lechner <david@lechnology.com>
Cc: dri-devel@lists.freedesktop.org,
	devicetree <devicetree@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	limor@ladyada.net, Nitin Patil <nitin@mindsensors.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 3/3] drm/tinydrm: new driver for ILI9341 display panels
Date: Sat, 19 May 2018 16:00:06 +0200	[thread overview]
Message-ID: <d0de831b-a7a3-eab3-2508-da50c346edae@tronnes.org> (raw)
In-Reply-To: <CAHp75VekNQyJa4KrezVq6dpr7NG3--mdZS9qka6CZjH9BdJxXQ@mail.gmail.com>


Den 15.05.2018 23.43, skrev Andy Shevchenko:
> On Tue, May 15, 2018 at 4:43 AM, David Lechner <david@lechnology.com> wrote:
>> This adds a new driver for display panels that use the Ilitek ILI9341
>> controller. It currently supports a single display panel, namely
>> the YX240QV29-T (e.g. Adafruit 2.4" TFT).
>>
>> The init sequence is from the Adafruit Python library for the ILI9341
>> controller. https://github.com/adafruit/Adafruit_Python_ILI9341
> Some minor style nitpicks, otherwise LGTM
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
>
>> Signed-off-by: David Lechner <david@lechnology.com>
>> ---
>>   MAINTAINERS                       |   6 +
>>   drivers/gpu/drm/tinydrm/Kconfig   |  10 ++
>>   drivers/gpu/drm/tinydrm/Makefile  |   1 +
>>   drivers/gpu/drm/tinydrm/ili9341.c | 239 ++++++++++++++++++++++++++++++
>>   4 files changed, 256 insertions(+)
>>   create mode 100644 drivers/gpu/drm/tinydrm/ili9341.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index bc219de9cbee..ffa099abbd79 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -4480,6 +4480,12 @@ S:       Maintained
>>   F:     drivers/gpu/drm/tinydrm/ili9225.c
>>   F:     Documentation/devicetree/bindings/display/ilitek,ili9225.txt
>>
>> +DRM DRIVER FOR ILITEK ILI9341 PANELS
>> +M:     David Lechner <david@lechnology.com>
>> +S:     Maintained
>> +F:     drivers/gpu/drm/tinydrm/ili9341.c
>> +F:     Documentation/devicetree/bindings/display/ilitek,ili9341.txt
>> +
>>   DRM DRIVER FOR INTEL I810 VIDEO CARDS
>>   S:     Orphan / Obsolete
>>   F:     drivers/gpu/drm/i810/
>> diff --git a/drivers/gpu/drm/tinydrm/Kconfig b/drivers/gpu/drm/tinydrm/Kconfig
>> index 4592a5e3f20b..7a8008b0783f 100644
>> --- a/drivers/gpu/drm/tinydrm/Kconfig
>> +++ b/drivers/gpu/drm/tinydrm/Kconfig
>> @@ -20,6 +20,16 @@ config TINYDRM_ILI9225
>>
>>            If M is selected the module will be called ili9225.
>>
>> +config TINYDRM_ILI9341
>> +       tristate "DRM support for ILI9341 display panels"
>> +       depends on DRM_TINYDRM && SPI
> Can't we do something like
>
> if SPI
>
> ...
>
> endif
>
> ?
>
>> +       select TINYDRM_MIPI_DBI
>> +       help
>> +         DRM driver for the following Ilitek ILI9341 panels:
>> +         * YX240QV29-T 2.4" 240x320 TFT (Adafruit 2.4")
>> +
>> +         If M is selected the module will be called ili9341.
>> +
>>   config TINYDRM_MI0283QT
>>          tristate "DRM support for MI0283QT"
>>          depends on DRM_TINYDRM && SPI
>> diff --git a/drivers/gpu/drm/tinydrm/Makefile b/drivers/gpu/drm/tinydrm/Makefile
>> index 49a111929724..14d99080665a 100644
>> --- a/drivers/gpu/drm/tinydrm/Makefile
>> +++ b/drivers/gpu/drm/tinydrm/Makefile
>> @@ -5,6 +5,7 @@ obj-$(CONFIG_TINYDRM_MIPI_DBI)          += mipi-dbi.o
>>
>>   # Displays
>>   obj-$(CONFIG_TINYDRM_ILI9225)          += ili9225.o
>> +obj-$(CONFIG_TINYDRM_ILI9341)          += ili9341.o
>>   obj-$(CONFIG_TINYDRM_MI0283QT)         += mi0283qt.o
>>   obj-$(CONFIG_TINYDRM_REPAPER)          += repaper.o
>>   obj-$(CONFIG_TINYDRM_ST7586)           += st7586.o
>> diff --git a/drivers/gpu/drm/tinydrm/ili9341.c b/drivers/gpu/drm/tinydrm/ili9341.c
>> new file mode 100644
>> index 000000000000..2ce4244a68c3
>> --- /dev/null
>> +++ b/drivers/gpu/drm/tinydrm/ili9341.c
>> @@ -0,0 +1,239 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * DRM driver for Ilitek ILI9341 panels
>> + *
>> + * Copyright 2018 David Lechner <david@lechnology.com>
>> + *
>> + * Based on mi0283qt.c:
>> + * Copyright 2016 Noralf Trønnes
>> + */
>> +
>> +#include <linux/backlight.h>
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/property.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/spi/spi.h>
>> +
>> +#include <drm/drm_fb_helper.h>
>> +#include <drm/drm_modeset_helper.h>
>> +#include <drm/drm_gem_framebuffer_helper.h>
> Can it be in order?
>
>> +#include <drm/tinydrm/mipi-dbi.h>
>> +#include <drm/tinydrm/tinydrm-helpers.h>
>> +#include <video/mipi_display.h>
>> +
>> +#define ILI9341_FRMCTR1                0xb1
>> +#define ILI9341_DISCTRL                0xb6
>> +#define ILI9341_ETMOD          0xb7
>> +
>> +#define ILI9341_PWCTRL1                0xc0
>> +#define ILI9341_PWCTRL2                0xc1
>> +#define ILI9341_VMCTRL1                0xc5
>> +#define ILI9341_VMCTRL2                0xc7
>> +#define ILI9341_PWCTRLA                0xcb
>> +#define ILI9341_PWCTRLB                0xcf
>> +
>> +#define ILI9341_PGAMCTRL       0xe0
>> +#define ILI9341_NGAMCTRL       0xe1
>> +#define ILI9341_DTCTRLA                0xe8
>> +#define ILI9341_DTCTRLB                0xea
>> +#define ILI9341_PWRSEQ         0xed
>> +
>> +#define ILI9341_EN3GAM         0xf2
>> +#define ILI9341_PUMPCTRL       0xf7
>> +
>> +#define ILI9341_MADCTL_BGR     BIT(3)
>> +#define ILI9341_MADCTL_MV      BIT(5)
>> +#define ILI9341_MADCTL_MX      BIT(6)
>> +#define ILI9341_MADCTL_MY      BIT(7)
>> +
>> +static void yx240qv29_enable(struct drm_simple_display_pipe *pipe,
>> +                            struct drm_crtc_state *crtc_state,
>> +                            struct drm_plane_state *plane_state)
>> +{
>> +       struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
>> +       struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
>> +       u8 addr_mode;
>> +       int ret;
>> +
>> +       DRM_DEBUG_KMS("\n");
>> +
>> +       ret = mipi_dbi_poweron_conditional_reset(mipi);
>> +       if (ret < 0)
>> +               return;
>> +       if (ret == 1)
>> +               goto out_enable;
>> +
>> +       mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_OFF);
>> +
>> +       mipi_dbi_command(mipi, ILI9341_PWCTRLB, 0x00, 0xc1, 0x30);
>> +       mipi_dbi_command(mipi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81);
>> +       mipi_dbi_command(mipi, ILI9341_DTCTRLA, 0x85, 0x00, 0x78);
>> +       mipi_dbi_command(mipi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02);
>> +       mipi_dbi_command(mipi, ILI9341_PUMPCTRL, 0x20);
>> +       mipi_dbi_command(mipi, ILI9341_DTCTRLB, 0x00, 0x00);
>> +
>> +       /* Power Control */
>> +       mipi_dbi_command(mipi, ILI9341_PWCTRL1, 0x23);
>> +       mipi_dbi_command(mipi, ILI9341_PWCTRL2, 0x10);
>> +       /* VCOM */
>> +       mipi_dbi_command(mipi, ILI9341_VMCTRL1, 0x3e, 0x28);
>> +       mipi_dbi_command(mipi, ILI9341_VMCTRL2, 0x86);
>> +
>> +       /* Memory Access Control */
>> +       mipi_dbi_command(mipi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);
>> +
>> +       /* Frame Rate */
>> +       mipi_dbi_command(mipi, ILI9341_FRMCTR1, 0x00, 0x1b);
>> +
>> +       /* Gamma */
>> +       mipi_dbi_command(mipi, ILI9341_EN3GAM, 0x00);
>> +       mipi_dbi_command(mipi, MIPI_DCS_SET_GAMMA_CURVE, 0x01);
>> +       mipi_dbi_command(mipi, ILI9341_PGAMCTRL,
>> +                        0x0f, 0x31, 0x2b, 0x0c, 0x0e, 0x08, 0x4e, 0xf1,
>> +                        0x37, 0x07, 0x10, 0x03, 0x0e, 0x09, 0x00);
>> +       mipi_dbi_command(mipi, ILI9341_NGAMCTRL,
>> +                        0x00, 0x0e, 0x14, 0x03, 0x11, 0x07, 0x31, 0xc1,
>> +                        0x48, 0x08, 0x0f, 0x0c, 0x31, 0x36, 0x0f);
>> +
>> +       /* DDRAM */
>> +       mipi_dbi_command(mipi, ILI9341_ETMOD, 0x07);
>> +
>> +       /* Display */
>> +       mipi_dbi_command(mipi, ILI9341_DISCTRL, 0x08, 0x82, 0x27, 0x00);
>> +       mipi_dbi_command(mipi, MIPI_DCS_EXIT_SLEEP_MODE);
>> +       msleep(100);
>> +
>> +       mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_ON);
>> +       msleep(100);
>> +
>> +out_enable:
>> +       switch (mipi->rotation) {
>> +       default:
>> +               addr_mode = ILI9341_MADCTL_MX;
>> +               break;
>> +       case 90:
>> +               addr_mode = ILI9341_MADCTL_MV;
>> +               break;
>> +       case 180:
>> +               addr_mode = ILI9341_MADCTL_MY;
>> +               break;
>> +       case 270:
>> +               addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY |
>> +                           ILI9341_MADCTL_MX;
>> +               break;
>> +       }
>> +       addr_mode |= ILI9341_MADCTL_BGR;
>> +       mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
>> +       mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
>> +}
>> +
>> +static const struct drm_simple_display_pipe_funcs ili9341_pipe_funcs = {
>> +       .enable = yx240qv29_enable,
>> +       .disable = mipi_dbi_pipe_disable,
>> +       .update = tinydrm_display_pipe_update,
>> +       .prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
>> +};
>> +
>> +static const struct drm_display_mode yx240qv29_mode = {
>> +       TINYDRM_MODE(240, 320, 37, 49),
>> +};
>> +
>> +DEFINE_DRM_GEM_CMA_FOPS(ili9341_fops);
>> +
>> +static struct drm_driver ili9341_driver = {
>> +       .driver_features        = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
>> +                                 DRIVER_ATOMIC,
> I would rather keep one per line, or all at one line disregard 80
> character limit.

I prefer on one line. I've started to use 100 character limit when it
makes sense, because all these linebreaks makes the code harder to read
(checkpatch.pl --max-line-length=100).

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>

Noralf.

>> +       .fops                   = &ili9341_fops,
>> +       TINYDRM_GEM_DRIVER_OPS,
>> +       .lastclose              = drm_fb_helper_lastclose,
>> +       .debugfs_init           = mipi_dbi_debugfs_init,
>> +       .name                   = "ili9341",
>> +       .desc                   = "Ilitek ILI9341",
>> +       .date                   = "20180514",
>> +       .major                  = 1,
>> +       .minor                  = 0,
>> +};
>> +
>> +static const struct of_device_id ili9341_of_match[] = {
>> +       { .compatible = "noname,yx240qv29" },
>> +       {},
> Terminators better w/o comma.
>
>> +};
>> +MODULE_DEVICE_TABLE(of, ili9341_of_match);
>> +
>> +static const struct spi_device_id ili9341_id[] = {
>> +       { "yx240qv29", 0 },
>> +       { },
> Ditto.
>
>> +};
>> +MODULE_DEVICE_TABLE(spi, ili9341_id);
>> +
>> +static int ili9341_probe(struct spi_device *spi)
>> +{
>> +       struct device *dev = &spi->dev;
>> +       struct mipi_dbi *mipi;
>> +       struct gpio_desc *dc;
>> +       u32 rotation = 0;
>> +       int ret;
>> +
>> +       mipi = devm_kzalloc(dev, sizeof(*mipi), GFP_KERNEL);
>> +       if (!mipi)
>> +               return -ENOMEM;
>> +
>> +       mipi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
>> +       if (IS_ERR(mipi->reset)) {
>> +               DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
>> +               return PTR_ERR(mipi->reset);
>> +       }
>> +
>> +       dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
>> +       if (IS_ERR(dc)) {
>> +               DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n");
>> +               return PTR_ERR(dc);
>> +       }
>> +
>> +       mipi->regulator = devm_regulator_get(dev, "power");
>> +       if (IS_ERR(mipi->regulator))
>> +               return PTR_ERR(mipi->regulator);
>> +
>> +       mipi->backlight = devm_of_find_backlight(dev);
>> +       if (IS_ERR(mipi->backlight))
>> +               return PTR_ERR(mipi->backlight);
>> +
>> +       device_property_read_u32(dev, "rotation", &rotation);
>
>> +
>> +       ret = mipi_dbi_spi_init(spi, mipi, dc);
>> +       if (ret)
>> +               return ret;
>> +
>> +       ret = mipi_dbi_init(&spi->dev, mipi, &ili9341_pipe_funcs,
>> +                           &ili9341_driver, &yx240qv29_mode, rotation);
>> +       if (ret)
>> +               return ret;
>> +
>> +       spi_set_drvdata(spi, mipi);
>> +
>> +       return devm_tinydrm_register(&mipi->tinydrm);
>> +}
>> +
>> +static void ili9341_shutdown(struct spi_device *spi)
>> +{
>> +       struct mipi_dbi *mipi = spi_get_drvdata(spi);
>> +
>> +       tinydrm_shutdown(&mipi->tinydrm);
>> +}
>> +
>> +static struct spi_driver ili9341_spi_driver = {
>> +       .driver = {
>> +               .name = "ili9341",
>> +               .of_match_table = ili9341_of_match,
>> +       },
>> +       .id_table = ili9341_id,
>> +       .probe = ili9341_probe,
>> +       .shutdown = ili9341_shutdown,
>> +};
>> +module_spi_driver(ili9341_spi_driver);
>> +
>> +MODULE_DESCRIPTION("Ilitek ILI9341 DRM driver");
>> +MODULE_AUTHOR("David Lechner <david@lechnology.com>");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.17.0
>>
>
>

      reply	other threads:[~2018-05-19 14:00 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-15  1:43 [PATCH 0/3] drm/tinydrm: new dirver for ILI9341 displays David Lechner
2018-05-15  1:43 ` [PATCH 1/3] MAINTAINERS: fix path to ilitek,ili9225 device tree bindings David Lechner
2018-05-19 13:24   ` Noralf Trønnes
2018-05-15  1:43 ` [PATCH 2/3] dt-bindings: new binding for Ilitek ILI9341 display panels David Lechner
2018-05-19 13:37   ` Noralf Trønnes
2018-05-19 15:50     ` David Lechner
2018-05-15  1:43 ` [PATCH 3/3] drm/tinydrm: new driver for " David Lechner
2018-05-15 21:43   ` Andy Shevchenko
2018-05-19 14:00     ` Noralf Trønnes [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d0de831b-a7a3-eab3-2508-da50c346edae@tronnes.org \
    --to=noralf@tronnes.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=david@lechnology.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=limor@ladyada.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=nitin@mindsensors.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®