mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: linux-kernel@vger.kernel.org,
	Xen-devel <xen-devel@lists.xensource.com>,
	the arch/x86 maintainers <x86@kernel.org>,
	Ian Campbell <ian.campbell@citrix.com>
Subject: [PATCH 30 of 38] xen: implement io_apic_ops
Date: Thu, 13 Nov 2008 11:10:28 -0800	[thread overview]
Message-ID: <d103c0da2fa147ac31af.1226603428@abulafia.goop.org> (raw)
In-Reply-To: <patchbomb.1226603398@abulafia.goop.org>

Writes to the IO APIC are paravirtualized via hypercalls, so implement
the appropriate operations.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/Makefile    |    3 +-
 arch/x86/xen/apic.c      |   66 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/xen/enlighten.c |    2 +
 arch/x86/xen/xen-ops.h   |    2 +
 4 files changed, 72 insertions(+), 1 deletion(-)

diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -9,4 +9,5 @@
 			time.o xen-asm_$(BITS).o grant-table.o suspend.o
 
 obj-$(CONFIG_SMP)		+= smp.o spinlock.o
-obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
\ No newline at end of file
+obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
+obj-$(CONFIG_XEN_DOM0)		+= apic.o
diff --git a/arch/x86/xen/apic.c b/arch/x86/xen/apic.c
new file mode 100644
--- /dev/null
+++ b/arch/x86/xen/apic.c
@@ -0,0 +1,66 @@
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/bitmap.h>
+
+#include <asm/io_apic.h>
+#include <asm/acpi.h>
+
+#include <asm/xen/hypervisor.h>
+#include <asm/xen/hypercall.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/physdev.h>
+
+static void __init xen_io_apic_init(void)
+{
+	printk("xen apic init\n");
+	dump_stack();
+}
+
+static unsigned int xen_io_apic_read(unsigned apic, unsigned reg)
+{
+	struct physdev_apic apic_op;
+	int ret;
+
+	apic_op.apic_physbase = mp_ioapics[apic].mp_apicaddr;
+	apic_op.reg = reg;
+	ret = HYPERVISOR_physdev_op(PHYSDEVOP_apic_read, &apic_op);
+	if (ret)
+		BUG();
+	return apic_op.value;
+}
+
+
+static void xen_io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+{
+	struct physdev_apic apic_op;
+
+	apic_op.apic_physbase = mp_ioapics[apic].mp_apicaddr;
+	apic_op.reg = reg;
+	apic_op.value = value;
+	if (HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op))
+		BUG();
+}
+
+static struct io_apic_ops __initdata xen_ioapic_ops = {
+	.init = xen_io_apic_init,
+	.read = xen_io_apic_read,
+	.write = xen_io_apic_write,
+	.modify = xen_io_apic_write,
+};
+
+void xen_init_apic(void)
+{
+	if (!xen_initial_domain())
+		return;
+
+	set_io_apic_ops(&xen_ioapic_ops);
+
+#ifdef CONFIG_ACPI
+	/*
+	 * Pretend ACPI found our lapic even though we've disabled it,
+ 	 * to prevent MP tables from setting up lapics.
+ 	 */
+	acpi_lapic = 1;
+#endif
+}
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1750,6 +1750,8 @@
 		set_iopl.iopl = 1;
 		if (HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl) == -1)
 			BUG();
+
+		xen_init_apic();
 	}
 
 	/* set the limit of our address space */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -64,6 +64,8 @@
 #endif
 
 
+void xen_init_apic(void);
+
 /* Declare an asm function, along with symbols needed to make it
    inlineable */
 #define DECL_ASM(ret, name, ...)		\



  parent reply	other threads:[~2008-11-13 19:44 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-13 19:09 [PATCH 00 of 38] xen: add more Xen dom0 support Jeremy Fitzhardinge
2008-11-13 19:09 ` [PATCH 01 of 38] xen: various whitespace and other formatting cleanups Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 02 of 38] x86: remove unused iommu_nr_pages Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 03 of 38] swiotlb: allow architectures to override swiotlb pool allocation Jeremy Fitzhardinge
2008-11-14  9:01   ` [Xen-devel] [PATCH 03 of 38] swiotlb: allow architectures tooverride " Jan Beulich
2008-11-14 19:33     ` Jeremy Fitzhardinge
2008-11-17  8:04       ` Chris Lalancette
2008-11-17  8:44         ` Keir Fraser
2008-11-17  9:15       ` [Xen-devel] [PATCH 03 of 38] swiotlb: allow architectures tooverrideswiotlb " Jan Beulich
2008-11-13 19:10 ` [PATCH 04 of 38] swiotlb: move some definitions to header Jeremy Fitzhardinge
2008-11-17  3:48   ` FUJITA Tomonori
2008-11-17 11:52     ` Ian Campbell
2008-11-13 19:10 ` [PATCH 05 of 38] swiotlb: allow architectures to override virt<->bus<->virt conversions Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 06 of 38] xen: clean up asm-x86/xen/hypervisor.h Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 07 of 38] x86: add io_apic_ops Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 08 of 38] x86: make apic_* operations inline functions Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 09 of 38] x86: make sure we really have an hpet mapping before using it Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 10 of 38] x86: add handle_irq() to allow interrupt injection Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 11 of 38] x86: define no-op exit_idle() on 32-bit Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 12 of 38] xen/dom0: handle acpi lapic parsing in Xen dom0 Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 13 of 38] x86: unstatic mp_find_ioapic so it can be used elsewhere Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 14 of 38] x86: add mp_find_ioapic_pin Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 15 of 38] x86: unstatic ioapic entry funcs Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 16 of 38] x86: include linux/init.h in asm/numa_64.h Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 17 of 38] x86: add swiotlb allocation functions Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 18 of 38] x86: unify pci iommu setup and allow swiotlb to compile for 32 bit Jeremy Fitzhardinge
2008-11-17  3:48   ` FUJITA Tomonori
2008-11-17 16:16     ` Ian Campbell
2008-11-19  2:19       ` FUJITA Tomonori
2008-11-19 13:48         ` Ian Campbell
2008-11-21 14:21         ` Ian Campbell
2008-11-22  1:49           ` FUJITA Tomonori
2008-11-24 11:41             ` Ian Campbell
2008-11-26  2:53               ` FUJITA Tomonori
2008-11-26  9:36                 ` Ian Campbell
2008-11-27  3:43                   ` FUJITA Tomonori
2008-11-27 17:14                     ` Ian Campbell
2008-11-28  6:28                       ` FUJITA Tomonori
2008-11-13 19:10 ` [PATCH 19 of 38] x86: add arch specific version of the swiotlb virt<->bus<->virt functions Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 20 of 38] xen dom0: Make hvc_xen console work for dom0 Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 21 of 38] xen dom0: Initialize xenbus " Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 22 of 38] xen dom0: Set up basic IO permissions " Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 23 of 38] xen-dom0: only selectively disable cpu features Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 24 of 38] xen dom0: Add support for the platform_ops hypercall Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 25 of 38] xen mtrr: Add mtrr_ops support for Xen mtrr Jeremy Fitzhardinge
2008-11-13 20:28   ` Mark McLoughlin
2008-11-14  0:35     ` Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 26 of 38] xen: forcibly disable PAT support Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 27 of 38] xen/dom0: use _PAGE_IOMAP in ioremap to do machine mappings Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 28 of 38] paravirt/xen: add pvop for page_is_ram Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 29 of 38] xen: create dummy ioapic mapping Jeremy Fitzhardinge
2008-11-13 19:10 ` Jeremy Fitzhardinge [this message]
2008-11-20  8:33   ` [PATCH 30 of 38] xen: implement io_apic_ops Simon Horman
2008-11-20 17:07     ` Jeremy Fitzhardinge
2008-11-20  9:35   ` Ingo Molnar
2008-11-20 17:00     ` Jeremy Fitzhardinge
2008-11-20 19:22       ` Ingo Molnar
2008-11-20 19:29         ` Yinghai Lu
2008-11-20 19:39           ` Jeremy Fitzhardinge
2008-11-20 19:40             ` Yinghai Lu
2008-11-20 19:38         ` Jeremy Fitzhardinge
2008-11-21  1:30         ` H. Peter Anvin
2008-11-20 20:22       ` Eric W. Biederman
2008-11-20 21:32         ` Jeremy Fitzhardinge
2008-11-21  0:58           ` Eric W. Biederman
2008-11-21  1:16             ` Jeremy Fitzhardinge
2008-11-21  4:27               ` Eric W. Biederman
2008-11-24 19:18                 ` Jeremy Fitzhardinge
2008-11-24 22:02                   ` Eric W. Biederman
2008-11-13 19:10 ` [PATCH 31 of 38] xen: set irq_chip disable Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 32 of 38] xen: use our own eventchannel->irq path Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 33 of 38] xen: pack all irq-related info together Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 34 of 38] xen: remove irq bindcount Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 35 of 38] xen: implement pirq type event channels Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 36 of 38] xen: route hardware irqs via Xen Jeremy Fitzhardinge
2008-11-20  9:31   ` Ingo Molnar
2008-11-20 17:06     ` Jeremy Fitzhardinge
2008-11-21  7:17   ` Simon Horman
2008-11-13 19:10 ` [PATCH 37 of 38] xen: bind pirq to vector and event channel Jeremy Fitzhardinge
2008-11-13 19:10 ` [PATCH 38 of 38] xen: make sure that softirqs get handled at the end of event processing Jeremy Fitzhardinge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d103c0da2fa147ac31af.1226603428@abulafia.goop.org \
    --to=jeremy@goop.org \
    --cc=ian.campbell@citrix.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=x86@kernel.org \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®