Re: [PATCH V2] ata: pata_pxa: Use platform_get_irq() to get the interrupt

[Damien Le Moal <damien.lemoal@opensource.wdc.com>]

On 3/9/22 14:50, cgel.zte@gmail.com wrote:
> From: Minghao Chi <chi.minghao@zte.com.cn>
> 
> platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
> allocation of IRQ resources in DT core code, this causes an issue
> when using hierarchical interrupt domains using "interrupts" property
> in the node as this bypasses the hierarchical setup and messes up the
> irq chaining.
> 
> In preparation for removal of static setup of IRQ resource from DT core
> code use platform_get_irq().
> 
> v1->v2:
> 	- Use more specific in the subject: ata: pata_pxa:
> 	- Switch to returning 'irq'
> Reported-by: Zeal Robot <zealci@zte.com.cn>
> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
> ---
>  drivers/ata/pata_pxa.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
> index 41430f79663c..340b274d0cad 100644
> --- a/drivers/ata/pata_pxa.c
> +++ b/drivers/ata/pata_pxa.c
> @@ -164,10 +164,10 @@ static int pxa_ata_probe(struct platform_device *pdev)
>  	struct resource *cmd_res;
>  	struct resource *ctl_res;
>  	struct resource *dma_res;
> -	struct resource *irq_res;
>  	struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev);
>  	struct dma_slave_config	config;
>  	int ret = 0;
> +	int irq;
>  
>  	/*
>  	 * Resource validation, three resources are needed:
> @@ -205,9 +205,9 @@ static int pxa_ata_probe(struct platform_device *pdev)
>  	/*
>  	 * IRQ pin
>  	 */
> -	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> -	if (unlikely(irq_res == NULL))
> -		return -EINVAL;
> +	irq = platform_get_irq(pdev, 0);
> +	if (unlikely(irq < 0))

Please drop the unlikely() here. Not needed. This is not the hot path.

> +		return irq;
>  
>  	/*
>  	 * Allocate the host
> @@ -287,7 +287,7 @@ static int pxa_ata_probe(struct platform_device *pdev)
>  	/*
>  	 * Activate the ATA host
>  	 */
> -	ret = ata_host_activate(host, irq_res->start, ata_sff_interrupt,
> +	ret = ata_host_activate(host, irq, ata_sff_interrupt,
>  				pdata->irq_flags, &pxa_ata_sht);
>  	if (ret)
>  		dma_release_channel(data->dma_chan);


-- 
Damien Le Moal
Western Digital Research