From: Vincenzo Frascino <vincenzo.frascino@arm.com>
To: Andrey Konovalov <andreyknvl@google.com>
Cc: Linux ARM <linux-arm-kernel@lists.infradead.org>,
LKML <linux-kernel@vger.kernel.org>,
kasan-dev <kasan-dev@googlegroups.com>,
Andrew Morton <akpm@linux-foundation.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Dmitry Vyukov <dvyukov@google.com>,
Andrey Ryabinin <aryabinin@virtuozzo.com>,
Alexander Potapenko <glider@google.com>,
Marco Elver <elver@google.com>,
Evgenii Stepanov <eugenis@google.com>,
Branislav Rankov <Branislav.Rankov@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Subject: Re: [PATCH v13 1/7] arm64: mte: Add asynchronous mode support
Date: Mon, 22 Feb 2021 11:14:38 +0000 [thread overview]
Message-ID: <d20e596b-f9b0-8f55-43a8-aacc3c0cb88f@arm.com> (raw)
In-Reply-To: <CAAeHK+xM1VHvSF_9ELf=_nDwJsUV2S1=LQy-rU-O0oyrNexzXw@mail.gmail.com>
On 2/12/21 9:21 PM, Andrey Konovalov wrote:
> On Thu, Feb 11, 2021 at 4:34 PM Vincenzo Frascino
> <vincenzo.frascino@arm.com> wrote:
>>
>> MTE provides an asynchronous mode for detecting tag exceptions. In
>> particular instead of triggering a fault the arm64 core updates a
>> register which is checked by the kernel after the asynchronous tag
>> check fault has occurred.
>>
>> Add support for MTE asynchronous mode.
>>
>> The exception handling mechanism will be added with a future patch.
>>
>> Note: KASAN HW activates async mode via kasan.mode kernel parameter.
>> The default mode is set to synchronous.
>> The code that verifies the status of TFSR_EL1 will be added with a
>> future patch.
>>
>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>> Cc: Will Deacon <will@kernel.org>
>> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
>> Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
>> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
>> ---
>> arch/arm64/include/asm/memory.h | 3 ++-
>> arch/arm64/include/asm/mte-kasan.h | 9 +++++++--
>> arch/arm64/kernel/mte.c | 19 ++++++++++++++++---
>> 3 files changed, 25 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
>> index c759faf7a1ff..91515383d763 100644
>> --- a/arch/arm64/include/asm/memory.h
>> +++ b/arch/arm64/include/asm/memory.h
>> @@ -243,7 +243,8 @@ static inline const void *__tag_set(const void *addr, u8 tag)
>> }
>>
>> #ifdef CONFIG_KASAN_HW_TAGS
>> -#define arch_enable_tagging() mte_enable_kernel()
>> +#define arch_enable_tagging_sync() mte_enable_kernel_sync()
>> +#define arch_enable_tagging_async() mte_enable_kernel_async()
>
> We need to update KASAN usage of arch_enable_tagging() to
> arch_enable_tagging_sync() in this patch as well. Otherwise, this
> leaves KASAN broken between this patch and the next one.
>
Yes you are right, still can't explain why it did bysect cleanly though.
I will introduce temporarily here:
#define arch_enable_tagging() arch_enable_tagging_sync()
and remove it again in the respective kasan patch.
>
>> #define arch_set_tagging_report_once(state) mte_set_report_once(state)
>> #define arch_init_tags(max_tag) mte_init_tags(max_tag)
>> #define arch_get_random_tag() mte_get_random_tag()
>> diff --git a/arch/arm64/include/asm/mte-kasan.h b/arch/arm64/include/asm/mte-kasan.h
>> index 7ab500e2ad17..4acf8bf41cad 100644
>> --- a/arch/arm64/include/asm/mte-kasan.h
>> +++ b/arch/arm64/include/asm/mte-kasan.h
>> @@ -77,7 +77,8 @@ static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag)
>> } while (curr != end);
>> }
>>
>> -void mte_enable_kernel(void);
>> +void mte_enable_kernel_sync(void);
>> +void mte_enable_kernel_async(void);
>> void mte_init_tags(u64 max_tag);
>>
>> void mte_set_report_once(bool state);
>> @@ -104,7 +105,11 @@ static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag)
>> {
>> }
>>
>> -static inline void mte_enable_kernel(void)
>> +static inline void mte_enable_kernel_sync(void)
>> +{
>> +}
>> +
>> +static inline void mte_enable_kernel_async(void)
>> {
>> }
>>
>> diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c
>> index a66c2806fc4d..706b7ab75f31 100644
>> --- a/arch/arm64/kernel/mte.c
>> +++ b/arch/arm64/kernel/mte.c
>> @@ -107,13 +107,26 @@ void mte_init_tags(u64 max_tag)
>> write_sysreg_s(SYS_GCR_EL1_RRND | gcr_kernel_excl, SYS_GCR_EL1);
>> }
>>
>> -void mte_enable_kernel(void)
>> +static inline void __mte_enable_kernel(const char *mode, unsigned long tcf)
>> {
>> /* Enable MTE Sync Mode for EL1. */
>> - sysreg_clear_set(sctlr_el1, SCTLR_ELx_TCF_MASK, SCTLR_ELx_TCF_SYNC);
>> + sysreg_clear_set(sctlr_el1, SCTLR_ELx_TCF_MASK, tcf);
>> isb();
>> +
>> + pr_info_once("MTE: enabled in %s mode at EL1\n", mode);
>> +}
>> +
>> +void mte_enable_kernel_sync(void)
>> +{
>> + __mte_enable_kernel("synchronous", SCTLR_ELx_TCF_SYNC);
>> +}
>> +EXPORT_SYMBOL_GPL(mte_enable_kernel_sync);
>> +
>> +void mte_enable_kernel_async(void)
>> +{
>> + __mte_enable_kernel("asynchronous", SCTLR_ELx_TCF_ASYNC);
>> }
>> -EXPORT_SYMBOL_GPL(mte_enable_kernel);
>> +EXPORT_SYMBOL_GPL(mte_enable_kernel_async);
>>
>> void mte_set_report_once(bool state)
>> {
>> --
>> 2.30.0
>>
--
Regards,
Vincenzo
next prev parent reply other threads:[~2021-02-22 11:11 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-11 15:33 [PATCH v13 0/7] arm64: ARMv8.5-A: MTE: Add async " Vincenzo Frascino
2021-02-11 15:33 ` [PATCH v13 1/7] arm64: mte: Add asynchronous " Vincenzo Frascino
2021-02-12 21:21 ` Andrey Konovalov
2021-02-22 11:14 ` Vincenzo Frascino [this message]
2021-02-11 15:33 ` [PATCH v13 2/7] kasan: Add KASAN mode kernel parameter Vincenzo Frascino
2021-02-11 17:50 ` Andrey Konovalov
2021-02-12 11:26 ` Vincenzo Frascino
2021-02-11 15:33 ` [PATCH v13 3/7] kasan: Add report for async mode Vincenzo Frascino
2021-02-11 20:03 ` kernel test robot
2021-02-11 20:13 ` Andrey Konovalov
2021-02-12 11:25 ` Vincenzo Frascino
2021-02-12 14:47 ` Andrey Konovalov
2021-02-11 23:03 ` kernel test robot
2021-02-11 15:33 ` [PATCH v13 4/7] arm64: mte: Enable TCO in functions that can read beyond buffer limits Vincenzo Frascino
2021-02-12 17:21 ` Catalin Marinas
2021-02-22 12:08 ` Vincenzo Frascino
2021-02-22 17:58 ` Catalin Marinas
2021-02-23 10:56 ` Vincenzo Frascino
2021-02-23 12:05 ` Catalin Marinas
2021-02-23 12:22 ` Vincenzo Frascino
2021-02-23 12:49 ` Will Deacon
2021-02-23 13:14 ` Catalin Marinas
2021-02-23 14:25 ` Vincenzo Frascino
2021-02-11 15:33 ` [PATCH v13 5/7] arm64: mte: Enable async tag check fault Vincenzo Frascino
2021-02-11 15:33 ` [PATCH v13 6/7] arm64: mte: Report async tag faults before suspend Vincenzo Frascino
2021-02-12 12:00 ` Lorenzo Pieralisi
2021-02-12 12:30 ` Lorenzo Pieralisi
2021-02-12 13:05 ` Vincenzo Frascino
2021-02-12 13:19 ` Catalin Marinas
2021-02-12 17:24 ` Catalin Marinas
2021-02-11 15:33 ` [PATCH v13 7/7] kasan: don't run tests in async mode Vincenzo Frascino
2021-02-12 0:49 ` kernel test robot
2021-02-12 17:22 ` Catalin Marinas
2021-02-12 21:44 ` Andrey Konovalov
2021-02-22 11:17 ` Vincenzo Frascino
2021-02-22 13:35 ` Andrey Konovalov
2021-02-11 15:45 ` [PATCH v13 0/7] arm64: ARMv8.5-A: MTE: Add async mode support Vincenzo Frascino
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d20e596b-f9b0-8f55-43a8-aacc3c0cb88f@arm.com \
--to=vincenzo.frascino@arm.com \
--cc=Branislav.Rankov@arm.com \
--cc=akpm@linux-foundation.org \
--cc=andreyknvl@google.com \
--cc=aryabinin@virtuozzo.com \
--cc=catalin.marinas@arm.com \
--cc=dvyukov@google.com \
--cc=elver@google.com \
--cc=eugenis@google.com \
--cc=glider@google.com \
--cc=kasan-dev@googlegroups.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®