mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Michal Wilczynski <m.wilczynski@samsung.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Andrzej Hajda <andrzej.hajda@intel.com>,
	Robert Foss <rfoss@kernel.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Luca Ceresoli <luca.ceresoli@bootlin.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Hal Feng <hal.feng@starfivetech.com>,
	Heiko Stuebner <heiko@sntech.de>, Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>,
	Dominique Belhachemi <db@domibel.de>, Andy Yan <andyshrk@163.com>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Yakir Yang <kuankuan.y@gmail.com>,
	Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
	Conor Dooley <conor@kernel.org>,
	William Qiu <william.qiu@starfivetech.com>,
	Xingyu Wu <xingyu.wu@starfivetech.com>,
	Sandy Huang <hjc@rock-chips.com>,
	Manivannan Sadhasivam <mani@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	linux-riscv@lists.infradead.org,
	"Marek Szyprowski" <m.szyprowski@samsung.com>,
	"Maud Spierings" <maud_spierings@murena.io>,
	"Graham Markall" <hello@big-grey.co.uk>,
	"Icenowy Zheng" <zhengxingda@iscas.ac.cn>,
	"Chaoyi Chen" <chaoyi.chen@rock-chips.com>,
	"Joshua Peisach" <jpeisach@ubuntu.com>,
	"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
	"Cristian Ciocaltea" <cristian.ciocaltea@collabora.com>,
	"Byron Stanoszek" <gandalf@winds.org>,
	OOHehir <oo.hehir@gmail.com>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski@oss.qualcomm.com>
Subject: Re: [PATCH v7 00/19] drm: starfive: jh7110: Enable display subsystem
Date: Fri, 20 Nov 2026 15:02:35 +0100	[thread overview]
Message-ID: <d21992c9-9e60-4613-b7cd-8e324d214a48@samsung.com> (raw)
In-Reply-To: <20261106-jh7110-clean-send-v7-0-68f7ea9913db@samsung.com>



On 11/6/26 14:58, Michal Wilczynski wrote:
> This series enables the display subsystem on the StarFive JH7110.
> 
> Merging: the series splits by subsystem, there is no build dependency
> between the blocks, and each block lands in the tree that already owns
> those files:
> 
>   drm-misc                     1-3, 6, 8-14, 17
>     drivers/gpu/drm/bridge/, include/drm/bridge/ and the display
>     bindings. Patches 1 and 2 are inno-hdmi fixes with Fixes: tags;
>     they apply to Rockchip as much as to StarFive and are independent
>     of the rest, so they can go on their own.
> 
>   Conor's tree                 4, 5, 7, 15-16, 18
>     drivers/soc/starfive/, together with
>     the bindings for its two drivers (patches 4 and 7, under
>     bindings/display/starfive/) and the vout-syscon compatible in
>     bindings/soc/starfive/ (STARFIVE SOC DRIVERS), and
>     arch/riscv/boot/dts/starfive/ (STARFIVE DEVICETREES).
> 
>   -                            19
>     MAINTAINERS.
> 
> The PHY patches are now a separate series for linux-phy, as Vinod
> suggested: "phy: Add the StarFive JH7110 Innosilicon HDMI PHY" [1]. This
> series depends on it, and the DT needs the PHY driver at runtime. There
> is no build dependency.
> 
> [1] https://lore.kernel.org/all/20261106-jh7110-inno-hdmi-phy-v7-0-d49368303800@samsung.com/
> 
> Ordering: patch 4 references the bindings from patch 3 and the PHY
> series, the example in patch 7 instantiates nodes from patches 3 and 6
> and the PHY series, and the DT in patch 18 uses all of them. Patches 4,
> 7 and 18 therefore need the drm-misc bindings and the PHY series in
> place to pass dt_binding_check and dtbs_check. Patches 5, 15 and 16 have
> no such dependency.
> 
> There are no out-of-tree dependencies: the dc8200 driver, the th1520
> reset controller and the inno-hdmi bridge that the RFC listed as
> prerequisites are all upstream now.
> 
> The clk patch that was 14/20 in v4 went in through the clk tree and is
> in v7.4-rc1 (af384d6e0573). The DT patch needs it at runtime for the
> pixel MUXes to follow the PHY.
> 
> The dom_vout block holds the display controller (dc8200), the clock
> generator (voutcrg) and the HDMI IP, all inside PD_VOUT. The HDMI IP is
> a single register block containing both the controller and the PHY,
> which are described as separate children because they have separate
> resources:
> 
>   - the PHY takes only the 24 MHz reference clock, and provides the
>     pixel clock that voutcrg routes on to the dc8200 pixel MUXes, and
>     the phy the controller uses
>   - the controller takes pclk/mclk/bclk from voutcrg
> 
> It is the same Innosilicon PHY that the RK3328 describes as its own
> hdmiphy node; here it shares a register window with the controller.
> 
> The parent maps the register block and owns the regmap its two children
> share. Everything in the region sits behind one NoC port whose clock and
> reset gate access to it, inside PD_VOUT, so the vout subsystem node from
> the RFC is back and owns those for as long as any child exists.
> 
> Patch 11 adds a .mode_valid platform op to inno-hdmi.
> inno_hdmi_bridge_mode_valid() checks the pixel clock against
> hdmi->refclk, but that clock only exists where a "ref" clock is
> described. The JH7110 gets its pixel clock from the PHY, so refclk is
> NULL and the check was skipped: unsupported modes were advertised, the
> modeset then "succeeded" because the atomic enable path cannot fail, and
> the display stayed blank.
> 
> Patch 12 makes the inno-hdmi PHY configuration table optional. The
> JH7110 drives its PHY through a separate driver, so the table only ever
> existed to get past a probe time check, and the register writes it fed
> belong to the integrated PHY the JH7110 does not have.
> 
> Patch 14 makes the HDMI version inno-hdmi advertises selectable. Since
> v7.4-rc1 it advertises HDMI 1.2 for every integration, which caps the
> TMDS character rate at 165 MHz. That fits Rockchip, but on the JH7110,
> which supports HDMI 1.4b, it hid all eight 3840x2160 and 4096x2160
> modes. Rockchip keeps HDMI 1.2.
> 
> Patches 1, 2 and 8-14 change the inno-hdmi bridge, which the Rockchip
> RK3036 and RK3128 use as well. Patch 9 moves its register access to a
> regmap, Rockchip included. I have no Rockchip hardware, so on Rockchip
> they are build tested only (arm and riscv). A Tested-by would help.
> 
> Testing
> =======
> 
> Tested on a VisionFive 2 v1.3B using modetest, with the PHY series
> applied.
> 
> All 42 modes the sink advertises work, with nothing in dmesg. Pixel
> clocks run from 25.175 MHz (640x480@59.94) up to 297 MHz
> (4096x2160@30), including 3840x2160 and the full 1920x1080 and 1280x720
> rate families.
> 
> The four modes the RFC reported as broken work now too: 2560x1440@59.95,
> 2048x1080@60.00, 2048x1080@24.00 and 720x400@70.08.
> 
> Before patch 11, four of the advertised modes failed: 1680x1050@59.95
> (146.250 MHz), 1400x1050@59.98 (121.750), 1152x864@59.97 (81.768) and
> 1280x768@60.35 (80.140). Those pixel clocks are not in the PHY pre-PLL
> table, so clk_set_rate() returned -EINVAL and the screen stayed black
> while userspace saw a successful modeset. They are rejected in
> .mode_valid now; the other refresh rates of those resolutions still work.
> 
> The mux the HDMI controller programs in dom_vout_syscon has a DP and a
> DPI branch, and the DT wires the DPI one, so the DP branch was checked
> separately by moving the input endpoint to the DC8200's DP output on a
> throwaway branch. SYSCFG_4 reads 0x4c0b0000 instead of 0x0c0b0000, the
> output is identical to the DPI path and all 42 modes set. Sweeping
> VOUT_HDMI_DP_YUV_MODE over its four values with a mode held shows only
> RGB giving a correct picture, as documented.
> 
> Every commit builds for riscv, and the Rockchip inno-hdmi glue also for
> arm.
> 
> Notes
> =====
> 
> The JH7110 has no central MAINTAINERS entry and maintainership is
> fragmented, so patch 19 adds one for the display subsystem and I am
> happy to help maintain it. The PHY series adds its own entry for the
> JH7110 HDMI PHY.
> 
> checkpatch warns "does MAINTAINERS need updating?" on the patches adding
> files, because that entry comes in patch 19.
> 
> Thanks to Icenowy Zheng for the dc8200 driver and for explaining how the
> SoC and the display pipeline fit together.
> 
> Thanks also to Dominique Belhachemi, who got rid of the vout-subsystem
> wrapper and helped with the testing, to Maud Spierings for testing on a
> Framework 13 panel, to Byron Stanoszek and OOHehir for testing v5, and
> to Graham Markall for testing the JH7110 display patches independently
> and writing up the results:
> https://big-grey.co.uk/2026/01/26/testing-starfive-jh7110-display-controller-patches/
> 
> Link to v1: https://lore.kernel.org/all/20251108-jh7110-clean-send-v1-0-06bf43bb76b1@samsung.com/
> 
> ---
> Changes in v7:
> - Moved the hdmi-subsystem and vout-subsystem bindings from
>   bindings/soc/starfive/ to bindings/display/starfive/ (Conor)
> - inno-hdmi: access the registers only through a regmap, the parent's
>   or an MMIO one over the controller's own resource, instead of keeping
>   two register paths (Heiko). Patch 9 is renamed to "Use a regmap for
>   register access" and drops its Reviewed-by and Tested-by tags, since
>   the Rockchip path changed
> - Trimmed the comment in the NULL drm_device fix (Heiko)
> - Collected Heiko's Reviewed-by on patches 1 and 2
> - Rebased onto v7.4-rc1, which has the clk patch and now creates
>   drivers/soc/starfive/ itself, so patches 15 and 16 add their Kconfig
>   entries to its existing menu
> - New patch 14 makes the advertised HDMI version selectable, and the
>   JH7110 advertises HDMI 1.4. The HDMI 1.2 that v7.4-rc1 advertises for
>   every inno-hdmi user hid the 3840x2160 and 4096x2160 modes
> - Link to v6: https://lore.kernel.org/r/20261029-jh7110-clean-send-v6-0-759594e43acf@samsung.com
> 
> Changes in v6:
> - Split the PHY patches into their own series (Vinod)
> - New patch 2: the hotplug NULL drm_device guard is split out of "Split
>   probe out of bind" into its own patch (Heiko)
> - inno_hdmi_bind() takes a platform_device, like dw_hdmi_bind() (Heiko)
> - Describe the HDMI PHY node by its resources rather than by the probe
>   cycle, in the commit messages and the Kconfig help (Krzysztof)
> - Rebased onto v7.3, collected tags
> - Link to v5: https://lore.kernel.org/r/20260929-jh7110-clean-send-v5-0-82b4d8e3c6c7@samsung.com
> 
> Changes in v5:
> - Rebased onto v7.3-rc5.
> - Dropped the clk patch, applied as af384d6e0573.
> - New patch 13 makes the HDMI_SYS_CTRL register clock source selectable
>   per platform, and the JH7110 selects the TMDS clock. The driver drove
>   the register interface from the system clock for everyone, and a
>   Framework 13 panel flickers continuously that way (Maud Spierings).
>   Rockchip keeps the system clock, so this is a no-op there. This was
>   listed as a known limitation in v4.
> - New patch 1 fixes v_HSYNC_POLARITY and v_VSYNC_POLARITY, which have
>   been swapped in inno-hdmi since the driver was merged. The hardware
>   puts HSYNC in bit 2 and VSYNC in bit 3, and the driver had them the
>   other way round. Almost all CEA modes drive both syncs with the same
>   polarity, so the two writes are indistinguishable and the bug only
>   shows on a mode whose polarities differ - a band of black rows at the
>   top of the screen, vsync_end - vsync_start + 1 rows tall. Reported
>   independently by Dominique Belhachemi, Maud Spierings and Byron
>   Stanoszek, and confirmed against the RK3128 TRM by Icenowy Zheng, so
>   this is a Rockchip fix too.
> - Added a 201 MHz entry to the JH7110 pre-PLL table for a 2560x1440
>   mode Byron Stanoszek runs on a Dell U2711. It is derived the same way
>   as the neighbouring entries (fbdiv 134, /16, VCO 3.216 GHz) but I have
>   no sink that asks for it, so it is untested on my hardware.
> - Moved the hdmi-subsystem binding from bindings/mfd/ to
>   bindings/soc/starfive/, next to the vout-subsystem binding and matching
>   its driver in drivers/soc/starfive/. The mfd/ path was left over from
>   when the driver was called hdmi-mfd; nothing in the series is an MFD
>   device, and it meant one isolated binding patch would have had to go
>   through the MFD tree on its own.
> - The commit message for "Split probe out of bind" claimed a matching
>   inno_hdmi_remove(); no such function exists, so the claim is gone.
> - Dropped Joshua Peisach's Reviewed-by from the PHY driver patch as well,
>   since that patch changed in v5.
> - Dropped Joshua Peisach's Reviewed-by from the binding patches; he said
>   he is not reviewing DT (Krzysztof Kozlowski). It is kept on the driver
>   patches he did look at.
> - Removed a probe-time clk_set_rate() from the PHY driver. It programmed
>   a default rate, and .set_rate writes PHY registers that live in the
>   window gated by the controller's system clock - a clock the PHY cannot
>   hold without creating a probe cycle with voutcrg.
> - Link to v4: https://lore.kernel.org/r/20260915-jh7110-clean-send-v4-0-f0e4fd6f2cc8@samsung.com
> 
> Changes in v4:
> - New patch 11 makes the inno-hdmi PHY configuration table optional, so
>   the JH7110 controller can drop the dummy two entry table it carried
>   only to satisfy the probe time check, along with the integrated PHY
>   register writes that table fed (Icenowy Zheng). That table was also
>   acting as an upper bound: inno_hdmi_find_phy_config() runs before the
>   platform .mode_valid and returns early, so its 297 MHz sentinel
>   rejected every mode above that even though the PHY pre-PLL table has a
>   594 MHz entry. Nothing here advertises such a mode, so it was latent.
> - Fixed a v3 regression: CLK_SET_RATE_NO_REPARENT stops clk_set_rate()
>   from reparenting the dc8200 pixel MUXes, so they kept whatever the
>   bootloader had selected and the display stayed black on boards where
>   that was not the HDMI PHY. They get assigned-clock-parents now (Maud
>   Spierings, Dominique Belhachemi).
> - vout-subsystem binding: describe the children by compatible instead of
>   $ref, as qcom,sm8750-mdss does, and show the whole subsystem with all
>   four children in the example (Krzysztof Kozlowski).
> - Dropped the vout-syscon example from starfive,jh7110-syscon.yaml, it
>   is part of the vout subsystem example now (Krzysztof Kozlowski).
> - Renamed the xin24m node to xin24m-clock (Krzysztof Kozlowski).
> - Fixed the HDMI HPD pinmux: it drove the pin high (GPOUT_HIGH with the
>   output enabled) while also reading it as the hotplug input, so HPD
>   could only ever read asserted. It is an input now.
> - jh7110-inno-hdmi: dropped a regmap lookup whose result was never used;
>   inno_hdmi_probe() fetches the parent regmap itself. The commit message
>   claimed otherwise and is corrected.
> - phy: rockchip: dropped two now unused RK3328 spread spectrum macros
>   the v3 cleanup missed. The register write itself moved to the shared
>   helper and is unchanged, so Chaoyi's Reviewed-by is carried over.
> - inno-hdmi: the hotplug handler dereferenced bridge.dev unconditionally.
>   Splitting probe out of bind moved the interrupt request to probe, so
>   an HPD event before the DRM master attaches the bridge would oops.
>   Guarded.
> - Dropped the <linux/mod_devicetable.h> includes (Uwe Kleine-König).
> - jh7110-inno-hdmi: __free(device_node) for the graph lookups, and
>   dropped the redundant negative check on clk_round_rate() (Chaoyi Chen).
> - phy: rockchip: dropped the recalc_rate debug print that the shared
>   helper already emits (Chaoyi Chen).
> - Rebased onto v7.3-rc3.
> - Link to v3: https://lore.kernel.org/r/20260904-jh7110-clean-send-v3-0-484f9ae72715@samsung.com
> 
> Changes in v3:
> - Brought back the vout subsystem node and driver, now owning the NoC
>   bus clock, its reset and PD_VOUT for the whole region, with dc8200,
>   the HDMI block, the syscon and voutcrg as its children (Icenowy Zheng).
> - Fixed a hard hang when the bridge is built as a module: the PHY's
>   .is_prepared read a register in the window gated by the controller's
>   system clock, so clk_disable_unused() wedged the CPU before the
>   controller had bound. The op is gone; the framework uses the software
>   prepare count instead. (Marek Szyprowski)
> - The HDMI controller now programs the display mux in dom_vout_syscon
>   from the port graph rather than inheriting whatever the bootloader
>   left, with a phandle to the syscon (Icenowy Zheng).
> - The register access clock is named "pclk" to match the existing
>   inno-hdmi binding, so the generic driver no longer picks up the pixel
>   clock. Previously it held the pre-PLL powered from probe and sized the
>   DDC divider from the wrong rate.
> - Dropped the clk suffixes and the single-entry -names properties from
>   the bindings (Conor Dooley). mclk and bclk keep their names: per TRM
>   5.3 they are the HDMI audio clocks, not module and bus clocks, so the
>   descriptions say that instead.
> - Replaced patternProperties with plain properties in the hdmi-subsystem
>   binding (Conor Dooley).
> - dc8200 gets an SoC specific compatible, and inherits dma-noncoherent
>   from the subsystem bus node, so it validates against verisilicon,dc.
> - Added the pre-PLL entry for the Framework 13 panel and fixed two
>   devicetree whitespace nits (Maud Spierings).
> - select REGMAP_MMIO, CLK_SET_RATE_NO_REPARENT on the dc8200 pixel MUXes
>   so clk_set_rate() cannot reroute them, and inno-hdmi register reads
>   return 0 instead of stack garbage when regmap_read() fails.
> - phy: rockchip: dropped the local pre-PLL lookup wrapper and the 28 now
>   unused RK3328 pre-PLL macros, and restored the VCO debug output, this
>   time in the shared helper so both drivers get it (Jonas Karlman).
> - Rebased onto v7.3-rc1.
> - Link to v2: https://lore.kernel.org/r/20260828-jh7110-clean-send-v2-0-331680c8b9d1@samsung.com
> 
> Changes since the RFC:
> - Dropped the vout-subsystem wrapper driver and its binding, along with
>   the patch relaxing the voutcrg binding; genpd handles PD_VOUT per
>   node.
> - Renamed the compatible to starfive,jh7110-hdmi-subsystem, dropping
>   "mfd" as a Linux term (Conor Dooley).
> - Absolute $refs in the bindings, unused example labels dropped, and the
>   examples deduplicated between parent and children (Conor Dooley).
> - Added the .mode_valid platform operation (patch 7).
> - Split the inno-hdmi rework into a mechanical probe/bind split (patch
>   4)
>   and the regmap-from-parent change (patch 5). struct inno_hdmi is no
>   longer exported; no platform glue dereferences it.
> - Replaced the duplicated PHY driver with a shared Innosilicon library
>   and moved Rockchip onto it (patches 11-13).
> - Fixed pre-PLL lock detection, which masked the status read with the
>   register address instead of the lock bit.
> - Fixed a pixel clock refcount underflow: enable returns early on
>   failure while disable tore down unconditionally.
> - voutcrg patch reduced to adding CLK_SET_RATE_PARENT to the two dc8200
>   pixel MUXes.
> - Rebased onto v7.2.
> 
> ---
> Michal Wilczynski (19):
>       drm/bridge: inno-hdmi: fix swapped HSYNC and VSYNC polarity
>       drm/bridge: inno-hdmi: Don't dereference a NULL drm_device on hotplug
>       dt-bindings: display: bridge: Add starfive,jh7110-inno-hdmi-controller
>       dt-bindings: display: starfive: Add starfive,jh7110-hdmi-subsystem
>       dt-bindings: soc: starfive: Add starfive,jh7110-vout-syscon
>       dt-bindings: display: verisilicon: Add starfive,jh7110-dc8200
>       dt-bindings: display: starfive: Add starfive,jh7110-vout-subsystem
>       drm/bridge: inno-hdmi: Split probe out of bind
>       drm/bridge: inno-hdmi: Use a regmap for register access
>       drm/bridge: inno-hdmi: Add .disable platform operation
>       drm/bridge: inno-hdmi: Add .mode_valid platform operation
>       drm/bridge: inno-hdmi: Make the PHY configuration table optional
>       drm/bridge: inno-hdmi: Make the register clock source selectable
>       drm/bridge: inno-hdmi: Make the supported HDMI version selectable
>       soc: starfive: Add jh7110-hdmi-subsystem driver
>       soc: starfive: Add jh7110-vout-subsystem driver
>       drm/bridge: starfive: Add JH7110 HDMI controller driver
>       riscv: dts: starfive: jh7110: Update DT for display subsystem
>       MAINTAINERS: Add StarFive JH7110 display subsystem entry
> 
>  .../starfive,jh7110-inno-hdmi-controller.yaml      | 121 +++++++++
>  .../starfive/starfive,jh7110-hdmi-subsystem.yaml   |  95 +++++++
>  .../starfive/starfive,jh7110-vout-subsystem.yaml   | 218 +++++++++++++++
>  .../bindings/display/verisilicon,dc.yaml           |   1 +
>  .../soc/starfive/starfive,jh7110-syscon.yaml       |   1 +
>  MAINTAINERS                                        |  11 +
>  arch/riscv/boot/dts/starfive/jh7110-common.dtsi    | 121 ++++++++-
>  arch/riscv/boot/dts/starfive/jh7110.dtsi           | 105 ++++++--
>  drivers/gpu/drm/bridge/Kconfig                     |  12 +
>  drivers/gpu/drm/bridge/Makefile                    |   1 +
>  drivers/gpu/drm/bridge/inno-hdmi.c                 | 125 +++++++--
>  drivers/gpu/drm/bridge/jh7110-inno-hdmi.c          | 297 +++++++++++++++++++++
>  drivers/gpu/drm/rockchip/inno_hdmi-rockchip.c      |   2 +-
>  drivers/soc/starfive/Kconfig                       |  34 +++
>  drivers/soc/starfive/Makefile                      |   2 +
>  drivers/soc/starfive/jh7110-hdmi-subsystem.c       |  72 +++++
>  drivers/soc/starfive/jh7110-vout-subsystem.c       |  82 ++++++
>  include/drm/bridge/inno_hdmi.h                     |  17 +-
>  18 files changed, 1266 insertions(+), 51 deletions(-)
> ---
> base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
> change-id: 20251031-jh7110-clean-send-7d2242118026
> prerequisite-change-id: 20261028-jh7110-inno-hdmi-phy-83e5cfa643e3:v7
> prerequisite-patch-id: e78b1dab85d70fa7ec3e551560dfc90891546de9
> prerequisite-patch-id: 7ffec3af58389aa090d5a9947889060dd5493138
> prerequisite-patch-id: 4a3488cc151ae0e9ef053ea67e8e520520c7df15
> prerequisite-patch-id: 37de8eb6867db62f75e39908a136684a1cc14743
> prerequisite-patch-id: 27aeff98d5c0b0bdb3eb9e9bbc2bf5e982864774
> 
> Best regards,

Gentle ping on this series. It depends on the Innosilicon HDMI PHY
series [1], but only for dt_binding_check/dtbs_check (the PHY binding
is referenced from the jh7110-hdmi-subsystem binding) and at runtime.
Everything else builds and can be reviewed independently.

Any comments on the DRM bridge / inno-hdmi parts would be much
appreciated.

[1] - https://lore.kernel.org/all/20261106-jh7110-inno-hdmi-phy-v7-0-d49368303800@samsung.com/

Best regards,
-- 
Michal Wilczynski <m.wilczynski@samsung.com>

      parent reply	other threads:[~2026-11-20 14:02 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20261106135849eucas1p242718d72fa1f38e31477210fd9ee30bc@eucas1p2.samsung.com>
2026-11-06 13:58 ` Michal Wilczynski
     [not found]   ` <CGME20261106135851eucas1p29a537bb4785f0a187619958bced510ec@eucas1p2.samsung.com>
2026-11-06 13:58     ` [PATCH v7 01/19] drm/bridge: inno-hdmi: fix swapped HSYNC and VSYNC polarity Michal Wilczynski
     [not found]   ` <CGME20261106135853eucas1p2881daeedcd9c5257f07cd5942b62cb9b@eucas1p2.samsung.com>
2026-11-06 13:58     ` [PATCH v7 02/19] drm/bridge: inno-hdmi: Don't dereference a NULL drm_device on hotplug Michal Wilczynski
     [not found]   ` <CGME20261106135855eucas1p141de720b324f4deb00c73981ffef51f7@eucas1p1.samsung.com>
2026-11-06 13:58     ` [PATCH v7 03/19] dt-bindings: display: bridge: Add starfive,jh7110-inno-hdmi-controller Michal Wilczynski
     [not found]   ` <CGME20261106135857eucas1p2a125bd1549caee008efe88b077873e69@eucas1p2.samsung.com>
2026-11-06 13:58     ` [PATCH v7 04/19] dt-bindings: display: starfive: Add starfive,jh7110-hdmi-subsystem Michal Wilczynski
     [not found]   ` <CGME20261106135858eucas1p25582287f0bc6486b39942f025fecabf6@eucas1p2.samsung.com>
2026-11-06 13:58     ` [PATCH v7 05/19] dt-bindings: soc: starfive: Add starfive,jh7110-vout-syscon Michal Wilczynski
     [not found]   ` <CGME20261106135900eucas1p17159021cc747335b62cad6b3326605be@eucas1p1.samsung.com>
2026-11-06 13:58     ` [PATCH v7 06/19] dt-bindings: display: verisilicon: Add starfive,jh7110-dc8200 Michal Wilczynski
     [not found]   ` <CGME20261106135902eucas1p1d8900fa2623e3230e42a67072602562d@eucas1p1.samsung.com>
2026-11-06 13:58     ` [PATCH v7 07/19] dt-bindings: display: starfive: Add starfive,jh7110-vout-subsystem Michal Wilczynski
     [not found]   ` <CGME20261106135904eucas1p14897dcc411c444d202a38190fdffffe7@eucas1p1.samsung.com>
2026-11-06 13:58     ` [PATCH v7 08/19] drm/bridge: inno-hdmi: Split probe out of bind Michal Wilczynski
     [not found]   ` <CGME20261106135906eucas1p2c3d4a479c32e76358b3421ad18669af1@eucas1p2.samsung.com>
2026-11-06 13:58     ` [PATCH v7 09/19] drm/bridge: inno-hdmi: Use a regmap for register access Michal Wilczynski
     [not found]   ` <CGME20261106135908eucas1p1327e42a8b4f0367d55353dae77307708@eucas1p1.samsung.com>
2026-11-06 13:58     ` [PATCH v7 10/19] drm/bridge: inno-hdmi: Add .disable platform operation Michal Wilczynski
     [not found]   ` <CGME20261106135910eucas1p2a31e2ed16ef7943a93a53077b539b1c5@eucas1p2.samsung.com>
2026-11-06 13:58     ` [PATCH v7 11/19] drm/bridge: inno-hdmi: Add .mode_valid " Michal Wilczynski
     [not found]   ` <CGME20261106135912eucas1p182016acc39d162adfbb9cb598ed7ca1c@eucas1p1.samsung.com>
2026-11-06 13:58     ` [PATCH v7 12/19] drm/bridge: inno-hdmi: Make the PHY configuration table optional Michal Wilczynski
     [not found]   ` <CGME20261106135915eucas1p23a8fabb523d860d913831836c240837e@eucas1p2.samsung.com>
2026-11-06 13:58     ` [PATCH v7 13/19] drm/bridge: inno-hdmi: Make the register clock source selectable Michal Wilczynski
     [not found]   ` <CGME20261106135917eucas1p260b4a7f05f2787a46d7282ede885401f@eucas1p2.samsung.com>
2026-11-06 13:58     ` [PATCH v7 14/19] drm/bridge: inno-hdmi: Make the supported HDMI version selectable Michal Wilczynski
     [not found]   ` <CGME20261106135918eucas1p1a3d7684adcefdc624b9748469d07e88c@eucas1p1.samsung.com>
2026-11-06 13:58     ` [PATCH v7 15/19] soc: starfive: Add jh7110-hdmi-subsystem driver Michal Wilczynski
     [not found]   ` <CGME20261106135921eucas1p1193f0f620b8b86512ea678919f664194@eucas1p1.samsung.com>
2026-11-06 13:58     ` [PATCH v7 16/19] soc: starfive: Add jh7110-vout-subsystem driver Michal Wilczynski
     [not found]   ` <CGME20261106135922eucas1p1c1bbe20725aff455ed61806af734baa5@eucas1p1.samsung.com>
2026-11-06 13:58     ` [PATCH v7 17/19] drm/bridge: starfive: Add JH7110 HDMI controller driver Michal Wilczynski
     [not found]   ` <CGME20261106135924eucas1p17cd8d0880486f9e932fe1b81ba3eeaf6@eucas1p1.samsung.com>
2026-11-06 13:58     ` [PATCH v7 18/19] riscv: dts: starfive: jh7110: Update DT for display subsystem Michal Wilczynski
     [not found]   ` <CGME20261106135926eucas1p2de40819f5e8307219ae80a96341c90f5@eucas1p2.samsung.com>
2026-11-06 13:58     ` [PATCH v7 19/19] MAINTAINERS: Add StarFive JH7110 display subsystem entry Michal Wilczynski
2026-11-06 19:48   ` [PATCH v7 00/19] drm: starfive: jh7110: Enable display subsystem Owen O'Hehir
2026-11-20 14:02   ` Michal Wilczynski [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d21992c9-9e60-4613-b7cd-8e324d214a48@samsung.com \
    --to=m.wilczynski@samsung.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=alex@ghiti.fr \
    --cc=andrzej.hajda@intel.com \
    --cc=andyshrk@163.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=chaoyi.chen@rock-chips.com \
    --cc=conor@kernel.org \
    --cc=cristian.ciocaltea@collabora.com \
    --cc=db@domibel.de \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@oss.qualcomm.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gandalf@winds.org \
    --cc=hal.feng@starfivetech.com \
    --cc=heiko@sntech.de \
    --cc=hello@big-grey.co.uk \
    --cc=hjc@rock-chips.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=jpeisach@ubuntu.com \
    --cc=kernel@esmil.dk \
    --cc=krzk+dt@kernel.org \
    --cc=krzysztof.kozlowski@oss.qualcomm.com \
    --cc=kuankuan.y@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=luca.ceresoli@bootlin.com \
    --cc=m.szyprowski@samsung.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mani@kernel.org \
    --cc=maud_spierings@murena.io \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=oo.hehir@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=rfoss@kernel.org \
    --cc=robh@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    --cc=u.kleine-koenig@baylibre.com \
    --cc=william.qiu@starfivetech.com \
    --cc=xingyu.wu@starfivetech.com \
    --cc=zhengxingda@iscas.ac.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®