Re: [PATCH] can: enable multi-queue for SocketCAN devices

["Jonas Mark (BT-FIR/ENG1)" <Mark.Jonas@de.bosch.com>]

Hello Marc,

> > The driver consists of two layers because the HW is accessed via SPI.
> 
> Normal SPI?

Yes, normal SPI (CLK, MOSI, MISO, SEL) plus two GPIOs for flow control.
The CAN peripheral (SPI slave) asserts the additional signals to
request a transfer and to signal that it is busy.

> > I will have to check but I am pretty confident that we would be willing
> > to publish the driver on these mailing lists as well. We will anyhow
> > ship the source code (or a written offer) with every distribution.
> 
> Sure - can I find your devices used and low priced on ebay :) ?

That is rather unlikely. Though, you could buy a building containing
one.

> > If you are really serious about the review I will get the process
> > rolling for an early publication of our driver.
> 
> Yes, please go ahead!

Ok, I'll kick off the process and start to collect the required signatures.

Greetings,
Mark

Bosch Building Technologies, Panel Software Fire (ST-FIR/ENG1) 
Bosch Sicherheitssysteme GmbH | Postfach 11 11 | 85626 Grasbrunn | GERMANY | www.boschsecurity.com

Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart HRB 23118 
Aufsichtsratsvorsitzender: Stefan Hartung; Geschäftsführung: Gert van Iperen, Andreas Bartz, Thomas Quante, Bernhard Schuster