From: Qunqin Zhao <zhaoqunqin@loongson.cn>
To: Lee Jones <lee@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-crypto@vger.kernel.org
Subject: Re: [PATCH] mfd: loongson-se: Add multi-node support
Date: Sat, 7 Mar 2026 14:29:00 +0800 [thread overview]
Message-ID: <d2e0c03d-717e-bae2-9066-0d8f84fdeca3@loongson.cn> (raw)
In-Reply-To: <20260306133558.GL183676@google.com>
在 2026/3/6 下午9:35, Lee Jones 写道:
> On Thu, 26 Feb 2026, Qunqin Zhao wrote:
>
>> On the Loongson platform, each node is equipped with a security engine
>> device. However, due to a hardware flaw, only the device on node 0 can
>> trigger interrupts. Therefore, interrupts from other nodes are forwarded
>> by node 0. We need to check in the interrupt handler of node 0 whether
>> this interrupt is intended for other nodes.
>>
>> Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
>> ---
>> drivers/mfd/loongson-se.c | 38 +++++++++++++++++++++++++++------
>> include/linux/mfd/loongson-se.h | 3 +++
>> 2 files changed, 35 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/mfd/loongson-se.c b/drivers/mfd/loongson-se.c
>> index 3902ba377..40e18c212 100644
>> --- a/drivers/mfd/loongson-se.c
>> +++ b/drivers/mfd/loongson-se.c
>> @@ -37,6 +37,9 @@ struct loongson_se_controller_cmd {
>> u32 info[7];
>> };
>>
>> +static DECLARE_COMPLETION(node0);
Devices on non-zero nodes rely on the device on node 0, so they need to
wait for the device on node 0 to complete initialization.
>> +static struct loongson_se *se_node[SE_MAX_NODES];
I need to iterate through all devices in interrupt context, so I use a
global variable to track them.
Could I ask if there might be a more suitable method?
Thanks,
Qunqin
> Really not keen on global variables.
>
> Why are they _needed_?
>
>> static int loongson_se_poll(struct loongson_se *se, u32 int_bit)
>> {
>> u32 status;
>> @@ -133,8 +136,8 @@ EXPORT_SYMBOL_GPL(loongson_se_init_engine);
>> static irqreturn_t se_irq_handler(int irq, void *dev_id)
>> {
>> struct loongson_se *se = dev_id;
>> - u32 int_status;
>> - int id;
>> + u32 int_status, node_irq = 0;
>> + int id, node;
>>
>> spin_lock(&se->dev_lock);
>>
>> @@ -147,6 +150,11 @@ static irqreturn_t se_irq_handler(int irq, void *dev_id)
>> writel(SE_INT_CONTROLLER, se->base + SE_S2LINT_CL);
>> }
>>
>> + if (int_status & SE_INT_OTHER_NODE) {
>> + int_status &= ~SE_INT_OTHER_NODE;
>> + node_irq = 1;
>> + }
>> +
>> /* For engines */
>> while (int_status) {
>> id = __ffs(int_status);
>> @@ -157,6 +165,14 @@ static irqreturn_t se_irq_handler(int irq, void *dev_id)
>>
>> spin_unlock(&se->dev_lock);
>>
>> + if (node_irq) {
>> + writel(SE_INT_OTHER_NODE, se->base + SE_S2LINT_CL);
>> + for (node = 1; node < SE_MAX_NODES; node++) {
>> + if (se_node[node])
>> + se_irq_handler(irq, se_node[node]);
>> + }
>> + }
>> +
>> return IRQ_HANDLED;
>> }
>>
>> @@ -189,6 +205,7 @@ static int loongson_se_probe(struct platform_device *pdev)
>> struct loongson_se *se;
>> int nr_irq, irq, err, i;
>> dma_addr_t paddr;
>> + int node = dev_to_node(dev);
>>
>> se = devm_kmalloc(dev, sizeof(*se), GFP_KERNEL);
>> if (!se)
>> @@ -213,9 +230,16 @@ static int loongson_se_probe(struct platform_device *pdev)
>>
>> writel(SE_INT_ALL, se->base + SE_S2LINT_EN);
>>
>> - nr_irq = platform_irq_count(pdev);
>> - if (nr_irq <= 0)
>> - return -ENODEV;
>> + if (node == 0 || node == NUMA_NO_NODE) {
>> + nr_irq = platform_irq_count(pdev);
>> + if (nr_irq <= 0)
>> + return -ENODEV;
>> + } else {
>> + /* Only the device on node 0 can trigger interrupts */
>> + nr_irq = 0;
>> + wait_for_completion_interruptible(&node0);
>> + se_node[node] = se;
>> + }
>>
>> for (i = 0; i < nr_irq; i++) {
>> irq = platform_get_irq(pdev, i);
>> @@ -228,7 +252,9 @@ static int loongson_se_probe(struct platform_device *pdev)
>> if (err)
>> return err;
>>
>> - return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, engines,
>> + complete_all(&node0);
>> +
>> + return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, engines,
>> ARRAY_SIZE(engines), NULL, 0, NULL);
>> }
>>
>> diff --git a/include/linux/mfd/loongson-se.h b/include/linux/mfd/loongson-se.h
>> index 07afa0c25..a80e06eb0 100644
>> --- a/include/linux/mfd/loongson-se.h
>> +++ b/include/linux/mfd/loongson-se.h
>> @@ -20,6 +20,9 @@
>>
>> #define SE_INT_ALL 0xffffffff
>> #define SE_INT_CONTROLLER BIT(0)
>> +#define SE_INT_OTHER_NODE BIT(31)
>> +
>> +#define SE_MAX_NODES 8
>>
>> #define SE_ENGINE_MAX 16
>> #define SE_ENGINE_RNG 1
>> --
>> 2.47.2
>>
prev parent reply other threads:[~2026-03-07 6:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-26 10:22 Qunqin Zhao
2026-03-06 13:35 ` Lee Jones
2026-03-07 6:29 ` Qunqin Zhao [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d2e0c03d-717e-bae2-9066-0d8f84fdeca3@loongson.cn \
--to=zhaoqunqin@loongson.cn \
--cc=lee@kernel.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®