From: Harry Wentland <harry.wentland@amd.com>
To: "Matthias Kaehlcke" <mka@chromium.org>,
"Alex Deucher" <alexander.deucher@amd.com>,
"Christian König" <christian.koenig@amd.com>,
"David Zhou" <David1.Zhou@amd.com>,
"David Airlie" <airlied@linux.ie>,
"Tony Cheng" <tony.cheng@amd.com>,
"Dmytro Laktyushkin" <Dmytro.Laktyushkin@amd.com>,
"Joshua Aberback" <Joshua.Aberback@amd.com>
Cc: amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org, Guenter Roeck <groeck@chromium.org>,
Justin TerAvest <teravest@chromium.org>,
Craig Bergstrom <craigb@chromium.org>
Subject: Re: [PATCH] drm/amd/display: Remove extra pairs of parentheses in dce_calcs.c
Date: Wed, 7 Feb 2018 15:48:19 -0500 [thread overview]
Message-ID: <d3c6dd11-7234-a427-e641-0740fae07005@amd.com> (raw)
In-Reply-To: <20180207194928.93869-1-mka@chromium.org>
On 2018-02-07 02:49 PM, Matthias Kaehlcke wrote:
> The double parentheses are not needed. Removing them fixes multiple
> warnings like this when building with clang:
>
> drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:617:42:
> error: equality comparison with extraneous parentheses
> [-Werror,-Wparentheses-equality]
> if ((data->graphics_micro_tile_mode == bw_def_rotated_micro_tiling)) {
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Thanks.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Harry
> ---
> drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c b/drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c
> index 2e11fac2a63d..bb03a9c64d5a 100644
> --- a/drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c
> +++ b/drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c
> @@ -623,7 +623,7 @@ static void calculate_bandwidth(
> }
> else {
> /*graphics portrait tiling mode*/
> - if ((data->graphics_micro_tile_mode == bw_def_rotated_micro_tiling)) {
> + if (data->graphics_micro_tile_mode == bw_def_rotated_micro_tiling) {
> data->orthogonal_rotation[i] = 0;
> }
> else {
> @@ -634,7 +634,7 @@ static void calculate_bandwidth(
> else {
> if ((i < 4)) {
> /*underlay landscape tiling mode is only supported*/
> - if ((data->underlay_micro_tile_mode == bw_def_display_micro_tiling)) {
> + if (data->underlay_micro_tile_mode == bw_def_display_micro_tiling) {
> data->orthogonal_rotation[i] = 0;
> }
> else {
> @@ -643,7 +643,7 @@ static void calculate_bandwidth(
> }
> else {
> /*graphics landscape tiling mode*/
> - if ((data->graphics_micro_tile_mode == bw_def_display_micro_tiling)) {
> + if (data->graphics_micro_tile_mode == bw_def_display_micro_tiling) {
> data->orthogonal_rotation[i] = 0;
> }
> else {
> @@ -947,14 +947,14 @@ static void calculate_bandwidth(
> }
> for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
> if (data->enable[i]) {
> - if ((data->number_of_displays == 1 && data->number_of_underlay_surfaces == 0)) {
> + if (data->number_of_displays == 1 && data->number_of_underlay_surfaces == 0) {
> /*set maximum chunk limit if only one graphic pipe is enabled*/
> data->outstanding_chunk_request_limit[i] = bw_int_to_fixed(127);
> }
> else {
> data->outstanding_chunk_request_limit[i] = bw_ceil2(bw_div(data->adjusted_data_buffer_size[i], data->pipe_chunk_size_in_bytes[i]), bw_int_to_fixed(1));
> /*clamp maximum chunk limit in the graphic display pipe*/
> - if ((i >= 4)) {
> + if (i >= 4) {
> data->outstanding_chunk_request_limit[i] = bw_max2(bw_int_to_fixed(127), data->outstanding_chunk_request_limit[i]);
> }
> }
> @@ -1337,7 +1337,7 @@ static void calculate_bandwidth(
> /*if stutter and dram clock state change are gated before cursor then the cursor latency hiding does not limit stutter or dram clock state change*/
> for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
> if (data->enable[i]) {
> - if ((dceip->graphics_lb_nodownscaling_multi_line_prefetching == 1)) {
> + if (dceip->graphics_lb_nodownscaling_multi_line_prefetching == 1) {
> data->maximum_latency_hiding[i] = bw_add(data->minimum_latency_hiding[i], bw_mul(bw_frc_to_fixed(8, 10), data->total_dmifmc_urgent_latency));
> }
> else {
> @@ -1396,7 +1396,7 @@ static void calculate_bandwidth(
> }
> /*determine the number of displays with margin to switch in the v_active region*/
> for (k = 0; k <= maximum_number_of_surfaces - 1; k++) {
> - if ((data->enable[k] == 1 && data->display_pstate_change_enable[k] == 1)) {
> + if (data->enable[k] == 1 && data->display_pstate_change_enable[k] == 1) {
> number_of_displays_enabled_with_margin = number_of_displays_enabled_with_margin + 1;
> }
> }
> @@ -1442,7 +1442,7 @@ static void calculate_bandwidth(
> data->nbp_state_change_enable = bw_def_no;
> }
> /*dram clock change is possible only in vblank if all displays are aligned and have no margin*/
> - if ((number_of_aligned_displays_with_no_margin == number_of_displays_enabled)) {
> + if (number_of_aligned_displays_with_no_margin == number_of_displays_enabled) {
> nbp_state_change_enable_blank = bw_def_yes;
> }
> else {
> @@ -1470,7 +1470,7 @@ static void calculate_bandwidth(
> }
> }
> /*compute minimum time to read one chunk from the dmif buffer*/
> - if ((number_of_displays_enabled > 2)) {
> + if (number_of_displays_enabled > 2) {
> data->chunk_request_delay = 0;
> }
> else {
> @@ -1804,7 +1804,7 @@ static void calculate_bandwidth(
> data->stutter_exit_watermark[i] = bw_add(bw_sub(vbios->stutter_self_refresh_exit_latency, data->total_dmifmc_urgent_latency), data->urgent_watermark[i]);
> data->stutter_entry_watermark[i] = bw_add(bw_sub(bw_add(vbios->stutter_self_refresh_exit_latency, vbios->stutter_self_refresh_entry_latency), data->total_dmifmc_urgent_latency), data->urgent_watermark[i]);
> /*unconditionally remove black out time from the nb p_state watermark*/
> - if ((data->display_pstate_change_enable[i] == 1)) {
> + if (data->display_pstate_change_enable[i] == 1) {
> data->nbp_state_change_watermark[i] = bw_add(bw_add(vbios->nbp_state_change_latency, data->dmif_burst_time[data->y_clk_level][data->sclk_level]), bw_max2(data->line_source_pixels_transfer_time, data->dram_speed_change_line_source_transfer_time[i][data->y_clk_level][data->sclk_level]));
> }
> else {
> @@ -1816,7 +1816,7 @@ static void calculate_bandwidth(
> data->urgent_watermark[i] = bw_add(bw_add(bw_add(bw_add(bw_add(vbios->mcifwrmc_urgent_latency, data->mcifwr_burst_time[data->y_clk_level][data->sclk_level]), bw_max2(data->line_source_pixels_transfer_time, data->line_source_transfer_time[i][data->y_clk_level][data->sclk_level])), vbios->blackout_duration), data->chunk_request_time), data->cursor_request_time);
> data->stutter_exit_watermark[i] = bw_int_to_fixed(0);
> data->stutter_entry_watermark[i] = bw_int_to_fixed(0);
> - if ((data->display_pstate_change_enable[i] == 1)) {
> + if (data->display_pstate_change_enable[i] == 1) {
> data->nbp_state_change_watermark[i] = bw_add(bw_add(vbios->nbp_state_change_latency, data->mcifwr_burst_time[data->y_clk_level][data->sclk_level]), bw_max2(data->line_source_pixels_transfer_time, data->dram_speed_change_line_source_transfer_time[i][data->y_clk_level][data->sclk_level]));
> }
> else {
>
prev parent reply other threads:[~2018-02-07 20:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-07 19:49 Matthias Kaehlcke
2018-02-07 20:42 ` Guenter Roeck
2018-02-07 20:48 ` Harry Wentland [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d3c6dd11-7234-a427-e641-0740fae07005@amd.com \
--to=harry.wentland@amd.com \
--cc=David1.Zhou@amd.com \
--cc=Dmytro.Laktyushkin@amd.com \
--cc=Joshua.Aberback@amd.com \
--cc=airlied@linux.ie \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=craigb@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=groeck@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mka@chromium.org \
--cc=teravest@chromium.org \
--cc=tony.cheng@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®