From: Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
To: Manivannan Sadhasivam <mani@kernel.org>
Cc: alim.akhtar@samsung.com, avri.altman@wdc.com, bvanassche@acm.org,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
James.Bottomley@hansenpartnership.com,
martin.petersen@oracle.com, quic_ahari@quicinc.com,
linux-arm-msm@vger.kernel.org, linux-scsi@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Shazad Hussain <quic_shazhuss@quicinc.com>
Subject: Re: [PATCH V1 3/3] ufs: ufs-qcom: Add support for firmware-managed resource abstraction
Date: Wed, 31 Dec 2025 10:27:21 +0530 [thread overview]
Message-ID: <d437486c-b782-48a3-a7ab-665cca769c79@oss.qualcomm.com> (raw)
In-Reply-To: <64hjdpdc745gazdzz7vuauhl5cohbfz2cgxb2yz2bt6mpezyb7@i2fyze7ozbc4>
On 12-Dec-25 6:15 AM, Manivannan Sadhasivam wrote:
> On Wed, Dec 10, 2025 at 09:33:08PM +0530, Ram Kumar Dwivedi wrote:
>>
>>
>> On 20-Nov-25 11:23 AM, Manivannan Sadhasivam wrote:
>>> On Fri, Nov 14, 2025 at 08:26:46PM +0530, Ram Kumar Dwivedi wrote:
>>>> From: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
>>>>
>>>> Add a compatible string for SA8255p platforms where resources such as
>>>> PHY, clocks, regulators, and resets are managed by firmware through an
>>>> SCMI server. Use the SCMI power protocol to abstract these resources and
>>>> invoke power operations via runtime PM APIs (pm_runtime_get/put_sync).
>>>>
>>>> Introduce vendor operations (vops) for SA8255p targets to enable SCMI-
>>>> based resource control. In this model, capabilities like clock scaling
>>>> and gating are not yet supported; these will be added incrementally.
>>>>
>>>> Co-developed-by: Anjana Hari <quic_ahari@quicinc.com>
>>>> Signed-off-by: Anjana Hari <quic_ahari@quicinc.com>
>>>> Co-developed-by: Shazad Hussain <quic_shazhuss@quicinc.com>
>>>> Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
>>>> Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
>>>> ---
>>>> drivers/ufs/host/ufs-qcom.c | 161 +++++++++++++++++++++++++++++++++++-
>>>> drivers/ufs/host/ufs-qcom.h | 1 +
>>>> 2 files changed, 161 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
>>>> index 8d119b3223cb..13ccf1fb2ebf 100644
>>>> --- a/drivers/ufs/host/ufs-qcom.c
>>>> +++ b/drivers/ufs/host/ufs-qcom.c
>>>> @@ -14,6 +14,7 @@
>>>> #include <linux/of.h>
>>>> #include <linux/phy/phy.h>
>>>> #include <linux/platform_device.h>
>>>> +#include <linux/pm_domain.h>
>>>> #include <linux/reset-controller.h>
>>>> #include <linux/time.h>
>>>> #include <linux/unaligned.h>
>>>> @@ -619,6 +620,27 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
>>>> return err;
>>>> }
>>>>
>>>> +static int ufs_qcom_fw_managed_hce_enable_notify(struct ufs_hba *hba,
>>>> + enum ufs_notify_change_status status)
>>>> +{
>>>> + struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>>>> +
>>>> + switch (status) {
>>>> + case PRE_CHANGE:
>>>> + ufs_qcom_select_unipro_mode(host);
>>>> + break;
>>>> + case POST_CHANGE:
>>>> + ufs_qcom_enable_hw_clk_gating(hba);
>>>> + ufs_qcom_ice_enable(host);
>>>> + break;
>>>> + default:
>>>> + dev_err(hba->dev, "Invalid status %d\n", status);
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> /**
>>>> * ufs_qcom_cfg_timers - Configure ufs qcom cfg timers
>>>> *
>>>> @@ -789,6 +811,38 @@ static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>>> return ufs_qcom_ice_resume(host);
>>>> }
>>>>
>>>> +static int ufs_qcom_fw_managed_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
>>>> + enum ufs_notify_change_status status)
>>>> +{
>>>> + struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>>>> +
>>>> + if (status == PRE_CHANGE)
>>>> + return 0;
>>>> +
>>>> + if (hba->spm_lvl != UFS_PM_LVL_5) {
>>>> + dev_err(hba->dev, "Unsupported spm level %d\n", hba->spm_lvl);
>>>> + return -EINVAL;
>>>> + }
>>>
>>> You should consider moving this check to ufs-sysfs.c where the sysfs write is
>>> handled. Failing due to unsupported suspend level at the last moment could be
>>> avoided.
>>
>> Hi Mani,
>>
>> We have planned to support other spm levels also in follow up series
>> once the basic UFS SCMI functionality is upstreamed. This spm_lvl check
>> is intended as a temporary safeguard while we only support SPM level 5.
>> If you'd still prefer a change, I caupdate this in the next patchset.
>>
>
> Please do it now as I don't see it logical to error out in suspend callback.
Hi Mani,
I have addressed the issue in latest patchset.
Thanks,
Ram.
>
> - Mani
>
prev parent reply other threads:[~2025-12-31 4:57 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-14 14:56 [PATCH V1 0/3] ufs: ufs-qcom: Add support firmware managed platforms Ram Kumar Dwivedi
2025-11-14 14:56 ` [PATCH V1 1/3] MAINTAINERS: broaden UFS Qualcomm binding file pattern Ram Kumar Dwivedi
2025-11-19 8:21 ` Dmitry Baryshkov
2025-11-20 5:48 ` Manivannan Sadhasivam
2025-11-14 14:56 ` [PATCH V1 2/3] dt-bindings: ufs: Document bindings for SA8255P UFS Host Controller Ram Kumar Dwivedi
2025-11-14 19:32 ` Bjorn Andersson
2025-12-10 15:52 ` Ram Kumar Dwivedi
2025-12-10 15:56 ` Ram Kumar Dwivedi
2025-12-11 6:30 ` Krzysztof Kozlowski
2025-11-15 11:55 ` Krzysztof Kozlowski
2025-12-10 15:47 ` Ram Kumar Dwivedi
2025-11-14 14:56 ` [PATCH V1 3/3] ufs: ufs-qcom: Add support for firmware-managed resource abstraction Ram Kumar Dwivedi
2025-11-20 5:53 ` Manivannan Sadhasivam
2025-12-10 16:03 ` Ram Kumar Dwivedi
2025-12-12 0:45 ` Manivannan Sadhasivam
2025-12-31 4:57 ` Ram Kumar Dwivedi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d437486c-b782-48a3-a7ab-665cca769c79@oss.qualcomm.com \
--to=ram.dwivedi@oss.qualcomm.com \
--cc=James.Bottomley@hansenpartnership.com \
--cc=alim.akhtar@samsung.com \
--cc=avri.altman@wdc.com \
--cc=bvanassche@acm.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mani@kernel.org \
--cc=martin.petersen@oracle.com \
--cc=quic_ahari@quicinc.com \
--cc=quic_shazhuss@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®