From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
Andreas Herrmann <aherrmann@suse.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
Peter Zijlstra <peterz@infradead.org>,
Frederic Weisbecker <frederic@kernel.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Linux PM <linux-pm@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] cpufreq: intel_pstate: Load when ACPI PCCH is present
Date: Tue, 17 Jul 2018 10:23:00 -0700 [thread overview]
Message-ID: <d4419603cb727bb28fe9ab7abfc9595b78cb7554.camel@linux.intel.com> (raw)
In-Reply-To: <8115130.Fhkpr82c7G@aspire.rjw.lan>
On Tue, 2018-07-17 at 18:13 +0200, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Currently, intel_pstate doesn't load if _PSS is not present on
> HP Proliant systems, because it expects the firmware to take over
> CPU performance scaling in that case. However, if ACPI PCCH is
> present, the firmware expects the kernel to use it for CPU
> performance scaling and the pcc-cpufreq driver is loaded for that.
>
> Unfortunately, the firmware interface used by that driver is not
> scalable for fundamental reasons, so pcc-cpufreq is way suboptimal
> on systems with more than just a few CPUs. In fact, it is better to
> avoid using it at all.
>
> For this reason, modify intel_pstate to look for ACPI PCCH if _PSS
> is not present and load if it is there.
>
> Fixes: fbbcdc0744da (intel_pstate: skip the driver if ACPI has power
> mgmt option)
> Reported-by: Andreas Herrmann <aherrmann@suse.com>
> Tested-by: Andreas Herrmann <aherrmann@suse.com>
> Reviewed-by: Andreas Herrmann <aherrmann@suse.com>
> Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
But do we need a change as done by the following commit in in pcc-
cpufreq.c?
"
commit 8a61e12e84597b5f8155ac91b44dea866ccfaac2
Author: Yinghai Lu <yinghai@kernel.org>
Date: Fri Sep 20 10:43:56 2013 -0700
acpi-cpufreq: skip loading acpi_cpufreq after intel_pstate
"
Thanks,
Srinivas
> ---
> drivers/cpufreq/intel_pstate.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> Index: linux-pm/drivers/cpufreq/intel_pstate.c
> ===================================================================
> --- linux-pm.orig/drivers/cpufreq/intel_pstate.c
> +++ linux-pm/drivers/cpufreq/intel_pstate.c
> @@ -2391,6 +2391,18 @@ static bool __init intel_pstate_no_acpi_
> return true;
> }
>
> +static bool __init intel_pstate_no_acpi_pcch(void)
> +{
> + acpi_status status;
> + acpi_handle handle;
> +
> + status = acpi_get_handle(NULL, "\\_SB", &handle);
> + if (ACPI_FAILURE(status))
> + return true;
> +
> + return !acpi_has_method(handle, "PCCH");
> +}
> +
> static bool __init intel_pstate_has_acpi_ppc(void)
> {
> int i;
> @@ -2450,7 +2462,10 @@ static bool __init intel_pstate_platform
>
> switch (plat_info[idx].data) {
> case PSS:
> - return intel_pstate_no_acpi_pss();
> + if (!intel_pstate_no_acpi_pss())
> + return false;
> +
> + return intel_pstate_no_acpi_pcch();
> case PPC:
> return intel_pstate_has_acpi_ppc() && !force_load;
> }
>
next prev parent reply other threads:[~2018-07-17 17:23 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-17 6:50 Commit 554c8aa8ecad causing severe performance degression with pcc-cpufreq Andreas Herrmann
2018-07-17 7:33 ` Rafael J. Wysocki
2018-07-17 8:03 ` Rafael J. Wysocki
2018-07-17 8:50 ` Andreas Herrmann
2018-07-17 8:58 ` Rafael J. Wysocki
2018-07-17 9:06 ` Rafael J. Wysocki
2018-07-17 9:11 ` Andreas Herrmann
2018-07-17 9:23 ` Rafael J. Wysocki
2018-07-17 9:27 ` Andreas Herrmann
2018-07-17 9:36 ` Andreas Herrmann
2018-07-17 10:09 ` Rafael J. Wysocki
2018-07-17 10:21 ` Andreas Herrmann
2018-07-17 10:23 ` Rafael J. Wysocki
2018-07-17 14:03 ` Andreas Herrmann
2018-07-17 15:29 ` Rafael J. Wysocki
2018-07-17 16:13 ` [PATCH] cpufreq: intel_pstate: Load when ACPI PCCH is present Rafael J. Wysocki
2018-07-17 17:23 ` Srinivas Pandruvada [this message]
2018-07-17 17:28 ` Rafael J. Wysocki
2018-07-17 18:06 ` [PATCH] cpufreq: intel_pstate: Register " Rafael J. Wysocki
2018-07-18 10:43 ` Andreas Herrmann
2018-07-18 10:51 ` Rafael J. Wysocki
2018-07-17 10:18 ` Commit 554c8aa8ecad causing severe performance degression with pcc-cpufreq Andreas Herrmann
2018-07-17 8:08 ` Daniel Lezcano
2018-07-17 8:36 ` Andreas Herrmann
2018-07-17 8:52 ` Rafael J. Wysocki
2018-07-17 8:15 ` Peter Zijlstra
2018-07-17 9:05 ` Andreas Herrmann
2018-07-17 12:02 ` [PATCH] cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems Rafael J. Wysocki
2018-07-17 16:14 ` [PATCH v2] " Rafael J. Wysocki
2018-07-17 20:13 ` Andreas Herrmann
2018-07-18 7:44 ` Rafael J. Wysocki
2018-07-18 8:23 ` Peter Zijlstra
2018-07-18 9:34 ` Andreas Herrmann
2018-07-18 15:25 ` Commit 554c8aa8ecad causing severe performance degression with pcc-cpufreq Andreas Herrmann
2018-07-18 15:31 ` Andreas Herrmann
2018-07-19 11:04 ` Andreas Herrmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d4419603cb727bb28fe9ab7abfc9595b78cb7554.camel@linux.intel.com \
--to=srinivas.pandruvada@linux.intel.com \
--cc=aherrmann@suse.com \
--cc=frederic@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=rafael.j.wysocki@intel.com \
--cc=rjw@rjwysocki.net \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome