Re: [PATCH v3 4/4] hwmon: (aquacomputer_d5next) Add AMPINEL support

[Guenter Roeck <linux@roeck-us.net>]

On 9/14/26 22:29, Vas Zayarskiy wrote:
> Hi Guenter,
> 
> Thanks for the review. I will add the trailing comma and separate the shared report validation and handling of an unknown firmware-version offset from the AMPINEL addition. I also noted the -ENODATA and conversion/scaling wording corrections on patch 2.
> 
>> If the match function _is_ needed, the reason needs to be explained, even
>> more so since this may impact USB_PRODUCT_ID_AQUAERO.
> 
> The requirement is to keep AMPINEL's keyboard interface bound to hid-generic while the hwmon driver handles telemetry. Both interfaces share the same VID/PID and match aqc_table. With the existing __check_hid_generic(), that ID match is enough for hid-generic to decline the keyboard. Returning -ENODEV from aqc_probe(), or rejecting it in aqc_match() alone, does not make it eligible for hid-generic.
> 
> The Aquaero collection check rejects its non-telemetry interfaces during probe, but that check alone does not establish keyboard fallback to hid-generic. V3 leaves Aquaero's collection filtering in probe: aqc_match() accepts it subject to the same generic-driver override checks the core already applies when there is no match callback. I do not have Aquaero hardware and have not validated its keyboard behavior.
> 
> The matcher test demonstrates the AMPINEL rejection with the original hid-generic logic and passes with patch 1. This is a userspace harness, not a live kernel fallback test. With both revised modules loaded on the physical AMPINEL, the keyboard registration/capabilities survived hwmon reload and suspend/resume, and its capabilities were preserved on reboot. I will make the matching rationale explicit in the next revision.
> 
>> FWIW, the raw even can happen prior to this, which will result
>> in bad data. This also affetcs other devices supported by this
>> driver (and those with fans can crash when it happens).
> 
> Could you clarify the path that permits raw_event during probe here? I checked the series base, 46fde107b4e881f179bf02bca69d8a0020561b3c. include/linux/hid.h documents that callbacks are blocked during probe unless the driver calls hid_device_io_start(). In hid-core.c, hid_device_probe() holds driver_input_lock around the driver's probe, and __hid_input_report() returns -EBUSY when it cannot acquire that lock.
> 
> aqc_probe() does not call hid_device_io_start(), and neither hid_hw_start() nor hid_hw_open() releases that lock. My reading is that normal USB reports cannot reach aqc_raw_event() until initialization has completed. Is there another path that bypasses this protection? I have not reproduced the race, and would like to understand it before adding a shared initialization fix.
> 

You are correct. Sorry, I missed the part about callbacks being blocked during probe
unless hid_device_io_start() is called.

Thanks,
Guenter