From: Neil Armstrong <neil.armstrong@linaro.org>
To: Svyatoslav Ryhel <clamor95@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] gpu/drm: panel: add support for DSI panel used in Motorola Atrix 4G and Droid X2
Date: Tue, 10 Mar 2026 14:09:20 +0100 [thread overview]
Message-ID: <d4665739-f3e5-410e-b5cb-b59dbcbc4851@linaro.org> (raw)
In-Reply-To: <20260223064630.12720-3-clamor95@gmail.com>
On 2/23/26 07:46, Svyatoslav Ryhel wrote:
> Add support for the DSI LCD panel module found in Motorola Atrix 4G or
> Droid X2 smartphones. Exact panel vendor and model are unknown hence panel
> uses generic compatible based on board where it is used. The panel has a
> 540x960 resolution with 24 bit RGB per pixel.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> drivers/gpu/drm/panel/Kconfig | 12 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-motorola-mot.c | 244 +++++++++++++++++++++
> 3 files changed, 257 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-motorola-mot.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 307152ad7759..477c54c90b01 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -464,6 +464,18 @@ config DRM_PANEL_MANTIX_MLAF057WE51
> has a resolution of 720x1440 pixels, a built in backlight and touch
> controller.
>
> +config DRM_PANEL_MOTOROLA_MOT
> + tristate "Atrix 4G and Droid X2 540x960 DSI video mode panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + select VIDEOMODE_HELPERS
> + help
> + Say Y here if you want to enable support for the LCD panel module
> + for Motorola Atrix 4G or Droid X2. Exact panel vendor and model are
> + unknown. The panel has a 540x960 resolution and uses 24 bit RGB per
> + pixel.
> +
> config DRM_PANEL_NEC_NL8048HL11
> tristate "NEC NL8048HL11 RGB panel"
> depends on GPIOLIB && OF && SPI
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index aeffaa95666d..e17ef8140806 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LD070WX3) += panel-lg-ld070wx3.o
> obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> obj-$(CONFIG_DRM_PANEL_LG_SW43408) += panel-lg-sw43408.o
> obj-$(CONFIG_DRM_PANEL_MAGNACHIP_D53E6EA8966) += panel-magnachip-d53e6ea8966.o
> +obj-$(CONFIG_DRM_PANEL_MOTOROLA_MOT) += panel-motorola-mot.o
> obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
> obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3051D) += panel-newvision-nv3051d.o
> obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3052C) += panel-newvision-nv3052c.o
> diff --git a/drivers/gpu/drm/panel/panel-motorola-mot.c b/drivers/gpu/drm/panel/panel-motorola-mot.c
> new file mode 100644
> index 000000000000..eb1f86c3d704
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-motorola-mot.c
> @@ -0,0 +1,244 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <linux/array_size.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_probe_helper.h>
> +
> +static const struct regulator_bulk_data mot_panel_supplies[] = {
> + { .supply = "vddio" }, { .supply = "vdd" },
> +};
> +
> +struct mot_panel {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> +
> + struct gpio_desc *reset_gpio;
> +
> + struct regulator_bulk_data *supplies;
> +};
> +
> +static inline struct mot_panel *to_mot_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct mot_panel, panel);
> +}
> +
> +static void mot_panel_reset(struct mot_panel *priv)
> +{
> + gpiod_set_value_cansleep(priv->reset_gpio, 1);
> + usleep_range(50000, 51000);
> + gpiod_set_value_cansleep(priv->reset_gpio, 0);
> + usleep_range(10000, 11000);
> +}
> +
> +static void mot_es2(struct mipi_dsi_multi_context *ctx)
> +{
> + mipi_dsi_generic_write_seq_multi(ctx, 0x55, 0x01);
> +
> + mipi_dsi_dcs_exit_sleep_mode_multi(ctx);
> + mipi_dsi_msleep(ctx, 120);
> +
> + mipi_dsi_generic_write_seq_multi(ctx, 0xf4, 0x00, 0xbb, 0x46, 0x53, 0x0c, 0x49,
> + 0x74, 0x29, 0x12, 0x15, 0x2f, 0x2f, 0x04);
> + mipi_dsi_generic_write_seq_multi(ctx, 0xf8, 0x4b, 0x04, 0x10, 0x1a, 0x2c, 0x2c,
> + 0x2c, 0x2c, 0x14, 0x12);
> +
> + mipi_dsi_generic_write_seq_multi(ctx, 0xb5, 0x03, 0x7f, 0x00, 0x80, 0xc7, 0x00);
> + mipi_dsi_generic_write_seq_multi(ctx, 0xb7, 0x66, 0xf6, 0x46, 0x9f, 0x90, 0x99,
> + 0xff, 0x80, 0x6d, 0x01);
> +
> + /* Gamma R */
> + mipi_dsi_generic_write_seq_multi(ctx, 0xf9, 0x04);
> + mipi_dsi_generic_write_seq_multi(ctx, 0xfa, 0x00, 0x2f, 0x30, 0x12, 0x0e, 0x0c,
> + 0x22, 0x27, 0x31, 0x2e, 0x07, 0x0f);
> + mipi_dsi_generic_write_seq_multi(ctx, 0xfb, 0x00, 0x2f, 0x30, 0x12, 0x0e, 0x0c,
> + 0x22, 0x27, 0x31, 0x2e, 0x07, 0x0f);
> +
> + /* Gamma G */
> + mipi_dsi_generic_write_seq_multi(ctx, 0xf9, 0x02);
> + mipi_dsi_generic_write_seq_multi(ctx, 0xfa, 0x00, 0x2f, 0x37, 0x15, 0x15, 0x11,
> + 0x1f, 0x25, 0x2d, 0x2a, 0x05, 0x0f);
> + mipi_dsi_generic_write_seq_multi(ctx, 0xfb, 0x00, 0x2f, 0x37, 0x15, 0x15, 0x11,
> + 0x1f, 0x25, 0x2d, 0x2a, 0x05, 0x0f);
> +
> + /* Gamma B */
> + mipi_dsi_generic_write_seq_multi(ctx, 0xf9, 0x01);
> + mipi_dsi_generic_write_seq_multi(ctx, 0xfa, 0x00, 0x2f, 0x3f, 0x16, 0x1f, 0x15,
> + 0x1f, 0x25, 0x2d, 0x2b, 0x06, 0x0b);
> + mipi_dsi_generic_write_seq_multi(ctx, 0xfb, 0x00, 0x2f, 0x3f, 0x16, 0x1f, 0x15,
> + 0x1f, 0x25, 0x2d, 0x2b, 0x06, 0x0b);
> +
> + /* Gamma W */
> + mipi_dsi_generic_write_seq_multi(ctx, 0xf9, 0x20);
> + mipi_dsi_generic_write_seq_multi(ctx, 0xfa, 0x00, 0x2f, 0x34, 0x15, 0x1a, 0x11,
> + 0x1f, 0x23, 0x2d, 0x29, 0x02, 0x08);
> + mipi_dsi_generic_write_seq_multi(ctx, 0xfb, 0x00, 0x2f, 0x34, 0x15, 0x1a, 0x11,
> + 0x1f, 0x23, 0x2d, 0x29, 0x02, 0x08);
> +
> + mipi_dsi_generic_write_seq_multi(ctx, 0x53, 0x2c);
> + mipi_dsi_generic_write_seq_multi(ctx, 0x35, 0x00);
> +}
> +
> +static int mot_panel_prepare(struct drm_panel *panel)
> +{
> + struct mot_panel *priv = to_mot_panel(panel);
> + struct mipi_dsi_multi_context ctx = { .dsi = priv->dsi };
> + struct device *dev = panel->dev;
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(mot_panel_supplies), priv->supplies);
> + if (ret < 0) {
> + dev_err(dev, "failed to enable power supplies: %d\n", ret);
> + return ret;
> + }
> +
> + mot_panel_reset(priv);
> +
> + mipi_dsi_generic_write_seq_multi(&ctx, 0xf0, 0x5a, 0x5a);
> + mipi_dsi_generic_write_seq_multi(&ctx, 0xf1, 0x5a, 0x5a);
> + mipi_dsi_generic_write_seq_multi(&ctx, 0xd0, 0x8e);
> +
> + mot_es2(&ctx);
> +
> + mipi_dsi_dcs_set_display_on_multi(&ctx);
> + mipi_dsi_msleep(&ctx, 20);
> +
> + return ctx.accum_err;
> +}
> +
> +static int mot_panel_disable(struct drm_panel *panel)
> +{
> + struct mot_panel *priv = to_mot_panel(panel);
> + struct mipi_dsi_multi_context ctx = { .dsi = priv->dsi };
> +
> + mipi_dsi_dcs_set_display_off_multi(&ctx);
> + mipi_dsi_dcs_enter_sleep_mode_multi(&ctx);
> + mipi_dsi_msleep(&ctx, 70);
> +
> + return ctx.accum_err;
> +}
> +
> +static int mot_panel_unprepare(struct drm_panel *panel)
> +{
> + struct mot_panel *priv = to_mot_panel(panel);
> +
> + usleep_range(10000, 11000);
> +
> + gpiod_set_value_cansleep(priv->reset_gpio, 1);
> + usleep_range(5000, 6000);
> +
> + regulator_bulk_disable(ARRAY_SIZE(mot_panel_supplies), priv->supplies);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode mot_panel_mode = {
> + .clock = (540 + 32 + 32 + 16) * (960 + 12 + 12 + 8) * 60 / 1000,
> + .hdisplay = 540,
> + .hsync_start = 540 + 32,
> + .hsync_end = 540 + 32 + 32,
> + .htotal = 540 + 32 + 32 + 16,
> + .vdisplay = 960,
> + .vsync_start = 960 + 12,
> + .vsync_end = 960 + 12 + 12,
> + .vtotal = 960 + 12 + 12 + 8,
> + .width_mm = 51,
> + .height_mm = 91,
> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> +};
> +
> +static int mot_panel_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + return drm_connector_helper_get_modes_fixed(connector, &mot_panel_mode);
> +}
> +
> +static const struct drm_panel_funcs mot_panel_panel_funcs = {
> + .prepare = mot_panel_prepare,
> + .disable = mot_panel_disable,
> + .unprepare = mot_panel_unprepare,
> + .get_modes = mot_panel_get_modes,
> +};
> +
> +static int mot_panel_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct mot_panel *priv;
> + int ret;
> +
> + priv = devm_drm_panel_alloc(dev, struct mot_panel, panel,
> + &mot_panel_panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> + if (IS_ERR(priv))
> + return PTR_ERR(priv);
> +
> + ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(mot_panel_supplies),
> + mot_panel_supplies, &priv->supplies);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "failed to get supplies\n");
> +
> + priv->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(priv->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
> + "failed to get reset gpios\n");
> +
> + priv->dsi = dsi;
> + mipi_dsi_set_drvdata(dsi, priv);
> +
> + dsi->lanes = 2;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_LPM;
> +
> + ret = drm_panel_of_backlight(&priv->panel);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "failed to get backlight\n");
> +
> + drm_panel_add(&priv->panel);
> +
> + ret = devm_mipi_dsi_attach(dev, dsi);
> + if (ret < 0) {
> + drm_panel_remove(&priv->panel);
> + return dev_err_probe(dev, ret, "failed to attach to DSI host\n");
> + }
> +
> + return 0;
> +}
> +
> +static void mot_panel_remove(struct mipi_dsi_device *dsi)
> +{
> + struct mot_panel *priv = mipi_dsi_get_drvdata(dsi);
> +
> + drm_panel_remove(&priv->panel);
> +}
> +
> +static const struct of_device_id mot_panel_of_match[] = {
> + { .compatible = "motorola,mot-panel" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mot_panel_of_match);
> +
> +static struct mipi_dsi_driver mot_panel_driver = {
> + .driver = {
> + .name = "panel-motorola-mot",
> + .of_match_table = mot_panel_of_match,
> + },
> + .probe = mot_panel_probe,
> + .remove = mot_panel_remove,
> +};
> +module_mipi_dsi_driver(mot_panel_driver);
> +
> +MODULE_AUTHOR("Svyatoslav Ryhel <clamor95@gmail.com>");
> +MODULE_DESCRIPTION("Motorola MOT panel driver");
> +MODULE_LICENSE("GPL");
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Thanks,
Neil
next prev parent reply other threads:[~2026-03-10 13:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-23 6:46 [PATCH v2 0/2] " Svyatoslav Ryhel
2026-02-23 6:46 ` [PATCH v2 1/2] dt-bindings: display: panel: document Atrix 4G and Droid X2 DSI panel Svyatoslav Ryhel
2026-03-05 23:54 ` Rob Herring (Arm)
2026-02-23 6:46 ` [PATCH v2 2/2] gpu/drm: panel: add support for DSI panel used in Motorola Atrix 4G and Droid X2 Svyatoslav Ryhel
2026-03-10 13:09 ` Neil Armstrong [this message]
2026-03-10 13:28 ` [PATCH v2 0/2] " Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d4665739-f3e5-410e-b5cb-b59dbcbc4851@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=airlied@gmail.com \
--cc=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®