mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: <sean.wang@mediatek.com>
To: <john@phrozen.org>, <davem@davemloft.net>
Cc: <nbd@openwrt.org>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>,
	Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH net-next 2/2] net-next: mediatek: cleanup unnecessary get chip id and its user
Date: Sat, 28 Jul 2018 13:35:56 +0800	[thread overview]
Message-ID: <d4fa77f13190aefa5cf3f609a3ae555aeef38259.1532755541.git.sean.wang@mediatek.com> (raw)
In-Reply-To: <658dfd485c035cdae5452bc5d572125076b47a48.1532755541.git.sean.wang@mediatek.com>

From: Sean Wang <sean.wang@mediatek.com>

Since driver is devicetree-based, all device type and charateristic can be
determined by the compatible string and its data. It's unnecessary to
create another dependent function to check chip ID and then decide whether
the specific funciton is being supported on a certain device. It can be
totally replaced by the existing flag, so a cleanup is made by removing
the function and the only user, HWLRO.

MT2701 also have a missing HWLRO support in old code, so add it the same
patch.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 48 +++--------------------------
 drivers/net/ethernet/mediatek/mtk_eth_soc.h |  2 +-
 2 files changed, 5 insertions(+), 45 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 8c85a4b..6e6abdc 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2458,42 +2458,6 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
 	return err;
 }
 
-static int mtk_get_chip_id(struct mtk_eth *eth, u32 *chip_id)
-{
-	u32 val[2], id[4];
-
-	regmap_read(eth->ethsys, ETHSYS_CHIPID0_3, &val[0]);
-	regmap_read(eth->ethsys, ETHSYS_CHIPID4_7, &val[1]);
-
-	id[3] = ((val[0] >> 16) & 0xff) - '0';
-	id[2] = ((val[0] >> 24) & 0xff) - '0';
-	id[1] = (val[1] & 0xff) - '0';
-	id[0] = ((val[1] >> 8) & 0xff) - '0';
-
-	*chip_id = (id[3] * 1000) + (id[2] * 100) +
-		   (id[1] * 10) + id[0];
-
-	if (!(*chip_id)) {
-		dev_err(eth->dev, "failed to get chip id\n");
-		return -ENODEV;
-	}
-
-	dev_info(eth->dev, "chip id = %d\n", *chip_id);
-
-	return 0;
-}
-
-static bool mtk_is_hwlro_supported(struct mtk_eth *eth)
-{
-	switch (eth->chip_id) {
-	case MT7622_ETH:
-	case MT7623_ETH:
-		return true;
-	}
-
-	return false;
-}
-
 static int mtk_probe(struct platform_device *pdev)
 {
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -2572,11 +2536,7 @@ static int mtk_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	err = mtk_get_chip_id(eth, &eth->chip_id);
-	if (err)
-		return err;
-
-	eth->hwlro = mtk_is_hwlro_supported(eth);
+	eth->hwlro = MTK_HAS_CAPS(eth->soc->caps, MTK_HWLRO);
 
 	for_each_child_of_node(pdev->dev.of_node, mac_np) {
 		if (!of_device_is_compatible(mac_np,
@@ -2665,19 +2625,19 @@ static int mtk_remove(struct platform_device *pdev)
 }
 
 static const struct mtk_soc_data mt2701_data = {
-	.caps = MTK_GMAC1_TRGMII,
+	.caps = MTK_GMAC1_TRGMII | MTK_HWLRO,
 	.required_clks = MT7623_CLKS_BITMAP,
 	.required_pctl = true,
 };
 
 static const struct mtk_soc_data mt7622_data = {
-	.caps = MTK_DUAL_GMAC_SHARED_SGMII | MTK_GMAC1_ESW,
+	.caps = MTK_DUAL_GMAC_SHARED_SGMII | MTK_GMAC1_ESW | MTK_HWLRO,
 	.required_clks = MT7622_CLKS_BITMAP,
 	.required_pctl = false,
 };
 
 static const struct mtk_soc_data mt7623_data = {
-	.caps = MTK_GMAC1_TRGMII,
+	.caps = MTK_GMAC1_TRGMII | MTK_HWLRO,
 	.required_clks = MT7623_CLKS_BITMAP,
 	.required_pctl = true,
 };
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 672b8c3..4681929 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -566,6 +566,7 @@ struct mtk_rx_ring {
 #define MTK_GMAC2_SGMII			(BIT(10) | MTK_SGMII)
 #define MTK_DUAL_GMAC_SHARED_SGMII	(BIT(11) | MTK_GMAC1_SGMII | \
 					 MTK_GMAC2_SGMII)
+#define MTK_HWLRO			BIT(12)
 #define MTK_HAS_CAPS(caps, _x)		(((caps) & (_x)) == (_x))
 
 /* struct mtk_eth_data -	This is the structure holding all differences
@@ -635,7 +636,6 @@ struct mtk_eth {
 	struct regmap			*ethsys;
 	struct regmap			*sgmiisys;
 	struct regmap			*pctl;
-	u32				chip_id;
 	bool				hwlro;
 	refcount_t			dma_refcnt;
 	struct mtk_tx_ring		tx_ring;
-- 
2.7.4


  reply	other threads:[~2018-07-28  5:36 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-28  5:35 [PATCH net-next 1/2] net-next: mediatek: improve more with using dma_zalloc_coherent sean.wang
2018-07-28  5:35 ` sean.wang [this message]
2018-07-29 20:16   ` [PATCH net-next 2/2] net-next: mediatek: cleanup unnecessary get chip id and its user David Miller
2018-07-29 20:16 ` [PATCH net-next 1/2] net-next: mediatek: improve more with using dma_zalloc_coherent David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d4fa77f13190aefa5cf3f609a3ae555aeef38259.1532755541.git.sean.wang@mediatek.com \
    --to=sean.wang@mediatek.com \
    --cc=davem@davemloft.net \
    --cc=john@phrozen.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=nbd@openwrt.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®