From: Guenter Roeck <linux@roeck-us.net>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Javier Carrasco <javier.carrasco.cruz@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Jean Delvare <jdelvare@suse.com>,
Jonathan Corbet <corbet@lwn.net>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org
Subject: Re: [PATCH v2 3/4] hwmon: Add support for Amphenol ChipCap 2
Date: Thu, 9 Nov 2023 06:55:23 -0800 [thread overview]
Message-ID: <d5692ab7-6d11-41f3-89ec-246a2fc045a8@roeck-us.net> (raw)
In-Reply-To: <30ccb0a9-c0bd-491e-817f-def0aeda11c6@linaro.org>
On 11/9/23 00:52, Krzysztof Kozlowski wrote:
> On 08/11/2023 16:37, Javier Carrasco wrote:
>> The Amphenol ChipCap 2 is a capacitive polymer humidity and temperature
>> sensor with an integrated EEPROM and minimum/maximum humidity alarms.
>>
>> All device variants offer an I2C interface and depending on the part
>> number, two different output modes:
>> - CC2D: digital output
>> - CC2A: analog (PDM) output
>>
>> This driver adds support for the digital variant (CC2D part numbers),
>> which is also divided into two subfamilies [1]:
>> - CC2DXX: non-sleep measurement mode
>> - CC2DXXS: sleep measurement mode
>
> ...
>
>> +
>> +static int cc2_probe(struct i2c_client *client)
>> +{
>> + struct cc2_data *data;
>> + struct device *dev = &client->dev;
>> + enum cc2_ids chip;
>> + int ret;
>> +
>> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
>> + return -EOPNOTSUPP;
>> +
>> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> + if (!data)
>> + return -ENOMEM;
>> +
>> + i2c_set_clientdata(client, data);
>> +
>> + mutex_init(&data->i2c_lock);
>> + mutex_init(&data->alarm_lock);
>> +
>> + data->client = client;
>> +
>> + if (client->dev.of_node)
>> + chip = (uintptr_t)of_device_get_match_data(&client->dev);
>> + else
>> + chip = i2c_match_id(cc2_id, client)->driver_data;
>> +
>> + data->config = &cc2_config[chip];
>> +
>> + ret = cc2_request_ready_irq(data, dev);
>> + if (ret)
>> + return ret;
>> +
>> + data->regulator = devm_regulator_get_optional(dev, "vdd");
>> + if (!IS_ERR(data->regulator)) {
>> + ret = cc2_retrive_alarm_config(data);
fwiw, s/retrive/retrieve/g
>> + if (ret)
>> + goto cleanup;
>> + } else {
>> + /* No access to EEPROM without regulator: no alarm control */
>> + goto dev_register;
>
> Nothing improved here.
>
> Do not send new version of patchset before discussion finishes.
>
This driver will take a while to review due to its complexity.
As for the code above: Error handling goes first. Something like
the above, where the error case is just a goto, is unacceptable and
just increases indentation level for the other code and makes it
more difficult to read. Also, the above code _will_ have to handle
error cases other than -ENODEV. Besides deferred probe, it is
completely inappropriate to ignore -EINVAL or -ENOMEM or any other
error codes other than -ENODEV.
>> + }
>> +
>> + ret = cc2_request_alarm_irqs(data, dev);
>> + if (ret)
>> + goto cleanup;
>> +
>> +dev_register:
>> + data->hwmon = devm_hwmon_device_register_with_info(dev, client->name,
>> + data, &cc2_chip_info,
>> + NULL);
>> + if (IS_ERR(data->hwmon)) {
>> + ret = PTR_ERR(data->hwmon);
>> + goto cleanup;
>> + }
>> +
>> + return 0;
>> +
>> +cleanup:
>> + if (cc2_disable(data))
>> + dev_dbg(dev, "Failed to disable device");
>> +
>> + return dev_err_probe(dev, ret,
>> + "Unable to register hwmon device\n");
>
> Drop or move to each error path.
>
This actually follows Documentation/process/coding-style.rst, chapter 7
(Centralized exiting of functions).
Guenter
next prev parent reply other threads:[~2023-11-09 14:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-08 15:37 [PATCH v2 0/4] " Javier Carrasco
2023-11-08 15:37 ` [PATCH v2 1/4] dt-bindings: vendor-prefixes: add Amphenol Javier Carrasco
2023-11-09 8:53 ` Krzysztof Kozlowski
2023-11-08 15:37 ` [PATCH v2 2/4] hwmon: (core) Add support for humidity min/max alarm Javier Carrasco
2023-11-09 0:02 ` Guenter Roeck
2023-11-09 6:24 ` Javier Carrasco
2023-11-15 13:25 ` Guenter Roeck
2023-11-15 13:56 ` Javier Carrasco
2023-11-08 15:37 ` [PATCH v2 3/4] hwmon: Add support for Amphenol ChipCap 2 Javier Carrasco
2023-11-09 8:52 ` Krzysztof Kozlowski
2023-11-09 14:55 ` Guenter Roeck [this message]
2023-11-09 15:36 ` Javier Carrasco
2023-11-09 16:18 ` Krzysztof Kozlowski
2023-11-09 16:25 ` Guenter Roeck
2023-11-08 15:37 ` [PATCH v2 4/4] dt-bindings: hwmon: Add " Javier Carrasco
2023-11-09 8:53 ` Krzysztof Kozlowski
2023-11-09 9:02 ` Javier Carrasco
2023-11-09 9:20 ` Krzysztof Kozlowski
2023-11-09 9:25 ` Javier Carrasco
2023-11-09 17:28 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d5692ab7-6d11-41f3-89ec-246a2fc045a8@roeck-us.net \
--to=linux@roeck-us.net \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=javier.carrasco.cruz@gmail.com \
--cc=jdelvare@suse.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®