From: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com>,
Maulik Shah <maulik.shah@oss.qualcomm.com>,
Sibi Sankar <sibi.sankar@oss.qualcomm.com>,
Taniya Das <taniya.das@oss.qualcomm.com>,
Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>,
Qiang Yu <qiang.yu@oss.qualcomm.com>,
Manaf Meethalavalappu Pallikunhi
<manaf.pallikunhi@oss.qualcomm.com>,
Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Abel Vesa <abelvesa@kernel.org>, Vinod Koul <vkoul@kernel.org>
Subject: Re: [PATCH v6 0/4] arm64: dts: qcom: Introduce Glymur SoC dtsi and Glymur CRD dts
Date: Thu, 29 Jan 2026 12:00:41 +0530 [thread overview]
Message-ID: <d587edd9-926d-4011-924c-e3c27263d5f2@oss.qualcomm.com> (raw)
In-Reply-To: <75lzykd37zdvrks5i2bb4zb2yzjtm25kv3hegmikndkbr772mz@w2ykff3ny45u>
On 1/29/2026 6:51 AM, Bjorn Andersson wrote:
> On Thu, Jan 22, 2026 at 08:53:57PM +0530, Pankaj Patil wrote:
>> Introduce dt-bindings and initial device tree support for Glymur,
>> Qualcomm's next-generation compute SoC and it's associated
>> Compute Reference Device (CRD) platform.
>>
>> https://www.qualcomm.com/products/mobile/snapdragon/laptops-and-tablets/snapdragon-x2-elite
>> https://www.qualcomm.com/news/releases/2025/09/new-snapdragon-x2-elite-extreme-and-snapdragon-x2-elite-are-the-
>>
>> The base support enables booting to shell with rootfs on NVMe,
>> demonstrating functionality for PCIe and NVMe subsystems.
>> DCVS is also enabled, allowing dynamic frequency scaling for the CPUs.
>> TSENS (Thermal Sensors) enabled for monitoring SoC temperature and
>> thermal management. The platform is capable of booting kernel at EL2
>> with kvm-unit tests performed on it for sanity.
>>
>> Added dtsi files for the PMIC's enabled PMH0101, PMK8850, PMCX0102,
>> SMB2370, PMH0104, PMH0110 along with temp-alarm and GPIO nodeS.
>>
>> For CPU compatible naming, there is one discussion which is not specific
>> to Glymur, Kaanapali and Glymur use the same Oryon cores.
>> https://lore.kernel.org/all/20251119-oryon-binding-v1-1-f79a101b0391@oss.qualcomm.com/
>> We've kept the "qcom,oryon" compatible
>>
>> Features enabled in this patchset:
>> 1. NVMe storage support
>> 2. PCIe controller and PCIe PHY
>> 3. RPMH Regulators
>> 4. Clocks and reset controllers - GCC, TCSRCC, DISPCC, RPMHCC
>> 5. Interrupt controller
>> 6. TLMM (Top-Level Mode Multiplexer)
>> 7. QUP Block
>> 8. Reserved memory regions
>> 9. PMIC support with regulators
>> 10. CPU Power Domains
>> 11. TSENS (Thermal Sensors)
>> 12. DCVS: CPU DCVS with scmi perf protocol
>>
>> Dependencies:
>>
>> dt-bindings:
>> 1. https://lore.kernel.org/all/20260121-glymur-pmic-mfd-v1-1-2aab4f21e79c@oss.qualcomm.com/
>> 2. https://lore.kernel.org/all/20251215-knp-pmic-leds-v3-2-5e583f68b0e5@oss.qualcomm.com/
>> 3. https://lore.kernel.org/all/20260121110828.2267061-1-pankaj.patil@oss.qualcomm.com/
>> 4. https://lore.kernel.org/all/20260111155234.5829-1-pankaj.patil@oss.qualcomm.com/
>>
>> Linux-next based tree with Glymur patches is available at:
>> https://git.codelinaro.org/clo/linux-kernel/kernel-qcom/-/tree/b4/v6_glymur_introduction
>>
>
> FWIW, I applied these patches onto next-20260128 to see if things has
> improved since Rob's report and I get:
>
> $ make qcom/glymur-crd.dtb CHECK_DTBS=1
> DTC [C] arch/arm64/boot/dts/qcom/glymur-crd.dtb
> qcom/glymur-crd.dtb: dma-controller@800000 (qcom,glymur-gpi-dma): interrupts: [[0, 588, 4], [0, 589, 4], [0, 590, 4], [0, 591, 4], [0, 592, 4], [0, 593, 4], [0, 594, 4], [0, 595, 4], [0, 596, 4], [0, 597, 4], [0, 598, 4], [0, 599, 4], [2, 129, 4], [2, 130, 4], [2, 131, 4], [2, 132, 4]] is too long
> from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml#
> qcom/glymur-crd.dtb: dma-controller@a00000 (qcom,glymur-gpi-dma): interrupts: [[0, 279, 4], [0, 280, 4], [0, 281, 4], [0, 282, 4], [0, 283, 4], [0, 284, 4], [0, 293, 4], [0, 294, 4], [0, 295, 4], [0, 296, 4], [0, 297, 4], [0, 298, 4], [2, 124, 4], [2, 125, 4], [2, 126, 4], [2, 127, 4]] is too long
> from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml#
> qcom/glymur-crd.dtb: dma-controller@b00000 (qcom,glymur-gpi-dma): interrupts: [[2, 76, 4], [2, 77, 4], [2, 78, 4], [2, 79, 4], [2, 80, 4], [2, 81, 4], [2, 82, 4], [2, 83, 4], [2, 84, 4], [2, 85, 4], [2, 86, 4], [2, 87, 4], [2, 88, 4], [2, 89, 4], [2, 90, 4], [2, 91, 4]] is too long
> from schema $id: http://devicetree.org/schemas/dma/qcom,gpi.yaml#
> qcom/glymur-crd.dtb: pmic@1 (qcom,pmh0101): led-controller@ee00:compatible:0: 'qcom,pmh0101-flash-led' is not one of ['qcom,pm6150l-flash-led', 'qcom,pm660l-flash-led', 'qcom,pm7550-flash-led', 'qcom,pm8150c-flash-led', 'qcom,pm8150l-flash-led', 'qcom,pm8350c-flash-led', 'qcom,pm8550-flash-led', 'qcom,pmi8998-flash-led']
> from schema $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
> qcom/glymur-crd.dtb: pmic@1 (qcom,pmh0101): pwm:compatible: 'oneOf' conditional failed, one must be fixed:
> ['qcom,pmh0101-pwm', 'qcom,pm8350c-pwm'] is too long
> 'qcom,pmh0101-pwm' is not one of ['qcom,pm660l-lpg', 'qcom,pm8150b-lpg', 'qcom,pm8150l-lpg', 'qcom,pm8350c-pwm', 'qcom,pm8916-pwm', 'qcom,pm8941-lpg', 'qcom,pm8994-lpg', 'qcom,pmc8180c-lpg', 'qcom,pmi632-lpg', 'qcom,pmi8950-pwm', 'qcom,pmi8994-lpg', 'qcom,pmi8998-lpg', 'qcom,pmk8550-pwm']
> 'qcom,pmh0101-pwm' is not one of ['qcom,pm6150l-lpg']
> 'qcom,pmh0101-pwm' is not one of ['qcom,pm8550-pwm']
> 'qcom,pmh0101-pwm' is not one of ['qcom,pm8937-pwm']
> 'qcom,pm8150l-lpg' was expected
> 'qcom,pm8916-pwm' was expected
> from schema $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
> qcom/glymur-crd.dtb: led-controller@ee00 (qcom,pmh0101-flash-led): compatible:0: 'qcom,pmh0101-flash-led' is not one of ['qcom,pm6150l-flash-led', 'qcom,pm660l-flash-led', 'qcom,pm7550-flash-led', 'qcom,pm8150c-flash-led', 'qcom,pm8150l-flash-led', 'qcom,pm8350c-flash-led', 'qcom,pm8550-flash-led', 'qcom,pmi8998-flash-led']
> from schema $id: http://devicetree.org/schemas/leds/qcom,spmi-flash-led.yaml#
> qcom/glymur-crd.dtb: /soc@0/arbiter@c400000/spmi@c426000/pmic@1/led-controller@ee00: failed to match any schema with compatible: ['qcom,pmh0101-flash-led', 'qcom,spmi-flash-led']
> qcom/glymur-crd.dtb: pwm (qcom,pmh0101-pwm): compatible: 'oneOf' conditional failed, one must be fixed:
> ['qcom,pmh0101-pwm', 'qcom,pm8350c-pwm'] is too long
> 'qcom,pmh0101-pwm' is not one of ['qcom,pm660l-lpg', 'qcom,pm8150b-lpg', 'qcom,pm8150l-lpg', 'qcom,pm8350c-pwm', 'qcom,pm8916-pwm', 'qcom,pm8941-lpg', 'qcom,pm8994-lpg', 'qcom,pmc8180c-lpg', 'qcom,pmi632-lpg', 'qcom,pmi8950-pwm', 'qcom,pmi8994-lpg', 'qcom,pmi8998-lpg', 'qcom,pmk8550-pwm']
> 'qcom,pmh0101-pwm' is not one of ['qcom,pm6150l-lpg']
> 'qcom,pmh0101-pwm' is not one of ['qcom,pm8550-pwm']
> 'qcom,pmh0101-pwm' is not one of ['qcom,pm8937-pwm']
> 'qcom,pm8150l-lpg' was expected
> 'qcom,pm8916-pwm' was expected
> from schema $id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
> qcom/glymur-crd.dtb: /soc@0/arbiter@c400000/spmi@c426000/pmic@1/pwm: failed to match any schema with compatible: ['qcom,pmh0101-pwm', 'qcom,pm8350c-pwm']
>
> So, we're still missing a few dependencies.
qcom,pmh0101-flash-led and qcom,pmh0101-pwm are part of lee's for-leds-next
tree but don't see them in next
https://git.kernel.org/pub/scm/linux/kernel/git/lee/leds.git/log/?h=for-leds-next
The interrupt maxItems has been acked by rob but not picked up by vinod yet
https://lore.kernel.org/all/20260121110828.2267061-1-pankaj.patil@oss.qualcomm.com/
>
>
> Booting the system I get a ton of errors from PCIe in the kernel log:
>
> debugfs: 'opp:5000000' already exists in 'soc@0-1c00000.pci'
>
> # dmesg | grep -E 'debugfs: .+ already exists' |wc -l
> 508
>
> The system does eventually boot, and I was happy to see that we do end
> up finding the PCIe devices after all.
>
> Regards,
> Bjorn
next prev parent reply other threads:[~2026-01-29 6:30 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-22 15:23 Pankaj Patil
2026-01-22 15:23 ` [PATCH v6 1/4] dt-bindings: arm: qcom: Document Glymur SoC and board Pankaj Patil
2026-01-22 15:23 ` [PATCH v6 2/4] arm64: defconfig: Enable Glymur configs for boot to shell Pankaj Patil
2026-01-22 15:24 ` [PATCH v6 3/4] arm64: dts: qcom: Introduce Glymur base dtsi Pankaj Patil
2026-01-22 20:45 ` Konrad Dybcio
2026-01-30 21:44 ` Abel Vesa
2026-01-30 22:00 ` Abel Vesa
2026-02-02 4:38 ` Pankaj Patil
2026-02-04 1:14 ` Dmitry Baryshkov
2026-01-22 15:24 ` [PATCH v6 4/4] arm64: dts: qcom: glymur: Enable Glymur CRD board support Pankaj Patil
2026-01-22 20:42 ` Konrad Dybcio
2026-02-02 5:04 ` Qiang Yu
2026-01-22 18:07 ` [PATCH v6 0/4] arm64: dts: qcom: Introduce Glymur SoC dtsi and Glymur CRD dts Rob Herring
2026-01-22 20:40 ` Konrad Dybcio
2026-01-22 23:00 ` Rob Herring
2026-01-29 1:21 ` Bjorn Andersson
2026-01-29 5:18 ` Qiang Yu
2026-01-29 6:30 ` Pankaj Patil [this message]
2026-01-29 12:05 ` Qiang Yu
2026-01-29 12:07 ` Konrad Dybcio
2026-01-29 16:32 ` Manivannan Sadhasivam
2026-01-30 9:27 ` Konrad Dybcio
2026-02-02 5:21 ` Qiang Yu
2026-02-02 9:49 ` Konrad Dybcio
2026-02-02 10:21 ` Qiang Yu
2026-02-03 9:50 ` Konrad Dybcio
2026-02-04 12:54 ` Manivannan Sadhasivam
2026-01-29 16:29 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d587edd9-926d-4011-924c-e3c27263d5f2@oss.qualcomm.com \
--to=pankaj.patil@oss.qualcomm.com \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=jishnu.prakash@oss.qualcomm.com \
--cc=jyothi.seerapu@oss.qualcomm.com \
--cc=kamal.wadhwa@oss.qualcomm.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manaf.pallikunhi@oss.qualcomm.com \
--cc=maulik.shah@oss.qualcomm.com \
--cc=qiang.yu@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=sibi.sankar@oss.qualcomm.com \
--cc=taniya.das@oss.qualcomm.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®