On Wed, Jul 01, 2026 at 03:36:47AM +0530, Kamal Wadhwa wrote:

> It seems that regulator registration failures happen after adding the read
> support ONLY if both of the conditions below are true for any regulator.

> 	1. The [min or max]-microvolts values defined in the device tree didn’t
> 	   exactly match with any of the  selector voltages supported by the
>   	   regulator.
> 	2. On top of this, if the initial value read is out-of-range of the
> 	   DT min,max limit.

That should just work, if there's some problem with that fix the core.