From: Paul Menzel <pmenzel@molgen.mpg.de>
To: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>,
Michal Pecio <michal.pecio@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: Re: xhci: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
Date: Fri, 4 Apr 2025 16:29:19 +0200 [thread overview]
Message-ID: <d69acb96-a90e-450f-94bd-d8116ca54ae4@molgen.mpg.de> (raw)
In-Reply-To: <b356f743-44b5-4f48-a289-fae0afe106ff@linux.intel.com>
Dear Mathias,
Thank you for your quick reply.
Am 04.04.25 um 16:26 schrieb Mathias Nyman:
> On 3.4.2025 21.02, Paul Menzel wrote:
>> Just a heads-up, that connecting an LMP USB-C mini Dock [1] to the
>> Intel Kaby Lake Dell XPS 13 9360 with
>>
>> 00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP
>> USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
>>
>> resulted in Linux 6.14.0-12966-ga2cc6ff5ec8f logging the warning and
>> trace below.
>>
>> ```
>> [ 74.898485] usb 4-1.4: reset SuperSpeed USB device number 5 using xhci_hcd
>> [ 74.916241] sd 0:0:0:0: [sda] Media removed, stopped polling
>> [ 74.916634] sd 0:0:0:0: [sda] Attached SCSI removable disk
>> [ 98.803081] PM: suspend entry (deep)
>> [ 98.813999] Filesystems sync: 0.010 seconds
>> [ 98.819226] Freezing user space processes
>> [ 105.534176] xhci_hcd 0000:39:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
>> [ 105.606437] usb 4-1.4: reset SuperSpeed USB device number 5 using xhci_hcd
>> [ 118.822270] Freezing user space processes failed after 20.003 seconds (2 tasks refusing to freeze, wq_busy=0):
>
> Thanks for the report.
>
> Looks like it's triggered during system suspend.
>
> "The Set TR Deq" command that fails here is queued when
> - endpoint stops to remove cancelled transfers.
> - endpoint resets to clear STALL or other halt due to transfer error.
> - canceling a transfer while endpoint is mid stall or tt clearing.
>
> Looks like there are at least some gaps in verifying endpoint state in
> endpoint reset handler before queuing the "Set TR Deq" command, this
> could be a possible reason.
>
> If this case could be reproduces with xhci dynamic debug enabled it
> would help narrowing down the real cause.
>
> echo 'module xhci_hcd =p' >/sys/kernel/debug/dynamic_debug/control
I haven’t found a way to reliably reproduce it. I’ll try, but it might
take a while.
Kind regards,
Paul
next prev parent reply other threads:[~2025-04-04 14:29 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-03 18:02 Paul Menzel
2025-04-04 14:26 ` Mathias Nyman
2025-04-04 14:29 ` Paul Menzel [this message]
2025-04-05 5:23 ` Paul Menzel
2025-04-05 22:23 ` Michał Pecio
2025-04-06 2:40 ` Alan Stern
2025-04-06 7:50 ` Michał Pecio
2025-04-06 15:50 ` Michał Pecio
2025-04-06 19:26 ` Alan Stern
2025-04-07 5:49 ` Michał Pecio
2025-04-07 16:11 ` Alan Stern
2025-04-08 10:18 ` [PATCH RFC RFT] usb: hcd: Add a usb_device argument to hc_driver.endpoint_reset() Michał Pecio
2025-04-08 13:55 ` Mathias Nyman
2025-04-09 10:18 ` Michał Pecio
2025-04-09 14:13 ` Alan Stern
2025-04-15 8:38 ` Michał Pecio
2025-04-07 7:15 ` xhci: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state Mathias Nyman
2025-04-05 6:43 ` Michał Pecio
2025-04-05 7:36 ` Paul Menzel
2025-04-05 9:49 ` Michał Pecio
2025-04-05 14:08 ` Paul Menzel
2025-04-05 18:13 ` Paul Menzel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d69acb96-a90e-450f-94bd-d8116ca54ae4@molgen.mpg.de \
--to=pmenzel@molgen.mpg.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=mathias.nyman@linux.intel.com \
--cc=michal.pecio@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®