From: Perry Yuan <perry.yuan@amd.com>
To: <rafael.j.wysocki@intel.com>, <Mario.Limonciello@amd.com>,
<Borislav.Petkov@amd.com>, <gautham.shenoy@amd.com>,
<viresh.kumar@linaro.org>, <Ray.Huang@amd.com>
Cc: <Alexander.Deucher@amd.com>, <Xinmei.Huang@amd.com>,
<Xiaojian.Du@amd.com>, <Perry.Yuan@amd.com>, <Li.Meng@amd.com>,
<linux-pm@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v9 3/7] cpufreq: amd-pstate: implement cpb_boost sysfs entry for boost control
Date: Mon, 6 May 2024 18:19:55 +0800 [thread overview]
Message-ID: <d69d52290ec7ab4073b266348b3d7c0adf13ee30.1714989803.git.perry.yuan@amd.com> (raw)
In-Reply-To: <cover.1714989803.git.perry.yuan@amd.com>
From: Perry Yuan <Perry.Yuan@amd.com>
With this new sysfs entry `cpb_boost`created, user can change CPU boost
state dynamically under `active`, `guided` and `passive` modes.
And the highest perf and frequency will also be updated as the boost
state changing.
0): check current boost state
cat /sys/devices/system/cpu/amd_pstate/cpb_boost
1): disable CPU boost
sudo bash -c "echo 0 > /sys/devices/system/cpu/amd_pstate/cpb_boost"
2): enable CPU boost
sudo bash -c "echo 1 > /sys/devices/system/cpu/amd_pstate/cpb_boost"
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217618
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
---
drivers/cpufreq/amd-pstate-ut.c | 2 +-
drivers/cpufreq/amd-pstate.c | 114 +++++++++++++++++++++++++++++++-
include/linux/amd-pstate.h | 1 +
3 files changed, 115 insertions(+), 2 deletions(-)
diff --git a/drivers/cpufreq/amd-pstate-ut.c b/drivers/cpufreq/amd-pstate-ut.c
index f04ae67dda37..b3601b0e6dd3 100644
--- a/drivers/cpufreq/amd-pstate-ut.c
+++ b/drivers/cpufreq/amd-pstate-ut.c
@@ -226,7 +226,7 @@ static void amd_pstate_ut_check_freq(u32 index)
goto skip_test;
}
- if (cpudata->boost_supported) {
+ if (amd_pstate_global_params.cpb_boost) {
if ((policy->max == cpudata->max_freq) ||
(policy->max == cpudata->nominal_freq))
amd_pstate_ut_cases[index].result = AMD_PSTATE_UT_RESULT_PASS;
diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index f7dab0f7b452..f81fd61dd2a9 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -686,8 +686,10 @@ static int amd_pstate_boost_init(struct amd_cpudata *cpudata)
}
amd_pstate_global_params.cpb_supported = !(boost_val & MSR_K7_HWCR_CPB_DIS);
- if (amd_pstate_global_params.cpb_supported)
+ if (amd_pstate_global_params.cpb_supported) {
current_pstate_driver->boost_enabled = true;
+ cpudata->boost_state = true;
+ }
amd_pstate_global_params.cpb_boost = amd_pstate_global_params.cpb_supported;
@@ -1293,6 +1295,114 @@ static ssize_t prefcore_show(struct device *dev,
return sysfs_emit(buf, "%s\n", str_enabled_disabled(amd_pstate_prefcore));
}
+static int amd_pstate_cpu_boost_update(struct cpufreq_policy *policy, bool on)
+{
+ struct amd_cpudata *cpudata = policy->driver_data;
+ struct cppc_perf_ctrls perf_ctrls;
+ u32 highest_perf, nominal_perf, nominal_freq, max_freq;
+ int ret;
+
+ if (!policy) {
+ pr_err("policy is null\n");
+ return -ENODATA;
+ }
+
+ highest_perf = READ_ONCE(cpudata->highest_perf);
+ nominal_perf = READ_ONCE(cpudata->nominal_perf);
+ nominal_freq = READ_ONCE(cpudata->nominal_freq);
+ max_freq = READ_ONCE(cpudata->max_freq);
+
+ if (boot_cpu_has(X86_FEATURE_CPPC)) {
+ u64 value = READ_ONCE(cpudata->cppc_req_cached);
+
+ value &= ~GENMASK_ULL(7, 0);
+ value |= on ? highest_perf : nominal_perf;
+ WRITE_ONCE(cpudata->cppc_req_cached, value);
+
+ wrmsrl_on_cpu(cpudata->cpu, MSR_AMD_CPPC_REQ, value);
+ } else {
+ perf_ctrls.max_perf = on ? highest_perf : nominal_perf;
+ ret = cppc_set_epp_perf(cpudata->cpu, &perf_ctrls, 1);
+ if (ret) {
+ cpufreq_cpu_release(policy);
+ pr_debug("failed to set energy perf value (%d)\n", ret);
+ return ret;
+ }
+ }
+
+ if (on)
+ policy->cpuinfo.max_freq = max_freq;
+ else
+ policy->cpuinfo.max_freq = nominal_freq * 1000;
+
+ policy->max = policy->cpuinfo.max_freq;
+
+ if (cppc_state == AMD_PSTATE_PASSIVE) {
+ ret = freq_qos_update_request(&cpudata->req[1],
+ policy->cpuinfo.max_freq);
+ }
+
+ return ret;
+}
+
+static int amd_pstate_cpu_boost(int cpu, bool state)
+{
+ int ret;
+ struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+ struct amd_cpudata *cpudata = policy->driver_data;
+
+ if (!policy) {
+ pr_err("policy is NULL\n");
+ ret = -ENODATA;
+ goto err_exit;
+ }
+
+ ret = amd_pstate_cpu_boost_update(policy, state);
+ refresh_frequency_limits(policy);
+ cpudata->boost_state = !!state;
+
+err_exit:
+ cpufreq_cpu_put(policy);
+ return ret < 0 ? ret : 0;
+}
+
+static ssize_t cpb_boost_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sysfs_emit(buf, "%u\n", amd_pstate_global_params.cpb_boost);
+}
+
+static ssize_t cpb_boost_store(struct device *dev, struct device_attribute *b,
+ const char *buf, size_t count)
+{
+ bool new_state;
+ ssize_t ret;
+ int cpu;
+
+ if (!amd_pstate_global_params.cpb_supported) {
+ pr_err("Boost mode is not supported by this processor or SBIOS\n");
+ return -EINVAL;
+ }
+
+ ret = kstrtobool(buf, &new_state);
+ if (ret)
+ return ret;
+
+ mutex_lock(&amd_pstate_driver_lock);
+ for_each_present_cpu(cpu) {
+ ret = amd_pstate_cpu_boost(cpu, new_state);
+ if (ret < 0) {
+ pr_warn("failed to update cpu boost for CPU%d (%d)\n", cpu, ret);
+ goto err_exit;
+ }
+ }
+ amd_pstate_global_params.cpb_boost = !!new_state;
+
+err_exit:
+ mutex_unlock(&amd_pstate_driver_lock);
+ return ret < 0 ? ret : count;
+}
+
cpufreq_freq_attr_ro(amd_pstate_max_freq);
cpufreq_freq_attr_ro(amd_pstate_lowest_nonlinear_freq);
@@ -1303,6 +1413,7 @@ cpufreq_freq_attr_rw(energy_performance_preference);
cpufreq_freq_attr_ro(energy_performance_available_preferences);
static DEVICE_ATTR_RW(status);
static DEVICE_ATTR_RO(prefcore);
+static DEVICE_ATTR_RW(cpb_boost);
static struct freq_attr *amd_pstate_attr[] = {
&amd_pstate_max_freq,
@@ -1327,6 +1438,7 @@ static struct freq_attr *amd_pstate_epp_attr[] = {
static struct attribute *pstate_global_attributes[] = {
&dev_attr_status.attr,
&dev_attr_prefcore.attr,
+ &dev_attr_cpb_boost.attr,
NULL
};
diff --git a/include/linux/amd-pstate.h b/include/linux/amd-pstate.h
index 8ba5dd4d3405..56f616a5cd0f 100644
--- a/include/linux/amd-pstate.h
+++ b/include/linux/amd-pstate.h
@@ -106,6 +106,7 @@ struct amd_cpudata {
u32 policy;
u64 cppc_cap1_cached;
bool suspended;
+ bool boost_state;
};
/*
--
2.34.1
next prev parent reply other threads:[~2024-05-06 10:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-06 10:19 [PATCH v9 0/7] AMD Pstate Driver Core Performance Boost Perry Yuan
2024-05-06 10:19 ` [PATCH v9 1/7] cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h Perry Yuan
2024-05-06 10:19 ` [PATCH v9 2/7] cpufreq: amd-pstate: initialize new core precision boost state Perry Yuan
2024-05-06 10:19 ` Perry Yuan [this message]
2024-05-06 13:27 ` [PATCH v9 3/7] cpufreq: amd-pstate: implement cpb_boost sysfs entry for boost control Limonciello, Mario
2024-05-06 15:01 ` Yuan, Perry
2024-05-06 10:19 ` [PATCH v9 4/7] cpufreq: amd-pstate: fix the MSR highest perf will be reset issue while cpb boost off Perry Yuan
2024-05-06 10:19 ` [PATCH v9 5/7] Documentation: cpufreq: amd-pstate: introduce the new cpu boost control method Perry Yuan
2024-05-06 10:19 ` [PATCH v9 6/7] cpufreq: amd-pstate: introduce per CPU frequency boost control Perry Yuan
2024-05-06 13:29 ` Limonciello, Mario
2024-05-06 10:19 ` [PATCH v9 7/7] Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method Perry Yuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d69d52290ec7ab4073b266348b3d7c0adf13ee30.1714989803.git.perry.yuan@amd.com \
--to=perry.yuan@amd.com \
--cc=Alexander.Deucher@amd.com \
--cc=Borislav.Petkov@amd.com \
--cc=Li.Meng@amd.com \
--cc=Mario.Limonciello@amd.com \
--cc=Ray.Huang@amd.com \
--cc=Xiaojian.Du@amd.com \
--cc=Xinmei.Huang@amd.com \
--cc=gautham.shenoy@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael.j.wysocki@intel.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®