Re: [PATCH v2 0/3] arm64: dts: ti: Introduce J722S SoC and EVM

[Vaishnav Achath <vaishnav.a@ti.com>]

Hi all,

On 06/02/24 15:36, Vaishnav Achath wrote:
> This series adds basic support for J722S family of SoCs. Also add
> J722S EVM support with basic peripheral like MMC and UART.
> 
> TRM: https://www.ti.com/lit/zip/sprujb3
> EVM Schematics: https://www.ti.com/lit/zip/sprr495
> 
> Bootlog (6.8.0-rc3-next-20240206):
> https://gist.github.com/vaishnavachath/23d859925277df9ccd628190e7c23371
> 

I missed to add link to V1 here, this a V2 of the below series with the 
feedback addressed:

https://lore.kernel.org/all/20231213124930.3012-1-vaishnav.a@ti.com/

Thanks and Regards,
Vaishnav

> Changelog:
> V1->V2:
>    * Address feedback from Nishanth to reuse from AM62P5 dtsi.
>    * Remove bootph-all from root nodes.
>    * Change License to GPL-2.0-only OR MIT as followed for other
>      K3 files.
> 
> Vaishnav Achath (3):
>    dt-bindings: arm: ti: Add bindings for J722S SoCs
>    arm64: dts: ti: Introduce J722S family of SoCs
>    arm64: dts: ti: Add support for TI J722S Evaluation Module
> 
>   .../devicetree/bindings/arm/ti/k3.yaml        |   6 +
>   arch/arm64/boot/dts/ti/Makefile               |   3 +
>   arch/arm64/boot/dts/ti/k3-j722s-evm.dts       | 251 ++++++++++++++++++
>   arch/arm64/boot/dts/ti/k3-j722s.dtsi          |  89 +++++++
>   arch/arm64/boot/dts/ti/k3-pinctrl.h           |   3 +
>   5 files changed, 352 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-evm.dts
>   create mode 100644 arch/arm64/boot/dts/ti/k3-j722s.dtsi
>