mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Kumar, Udit" <u-kumar1@ti.com>
To: Beleswar Padhi <b-padhi@ti.com>, <nm@ti.com>, <vigneshr@ti.com>,
	<kristo@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>,
	<conor+dt@kernel.org>
Cc: <j-choudhary@ti.com>, <vaishnav.a@ti.com>, <afd@ti.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <u-kumar1@ti.com>
Subject: Re: [PATCH v4 1/2] arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes
Date: Fri, 30 Aug 2024 20:40:55 +0530	[thread overview]
Message-ID: <d6bf10b1-9671-4c21-8093-48a4065ceb3c@ti.com> (raw)
In-Reply-To: <20240829060932.3441295-2-b-padhi@ti.com>


On 8/29/2024 11:39 AM, Beleswar Padhi wrote:
> From: Apurva Nandan <a-nandan@ti.com>
>
> The K3 J722S SoCs have one single-core Arm Cortex-R5F processor in each
> of the WAKEUP, MCU and MAIN voltage domain, and two C71x DSP subsystems
> in MAIN voltage domain. Add the DT nodes to support Inter-Processor
> Communication.
>
> Signed-off-by: Apurva Nandan <a-nandan@ti.com>
> [ refactoring changes to k3-j722s-main.dtsi ]
> Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
> [...]
>   arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 61 +++++++++++++++++++++++
>   1 file changed, 61 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> index cadb4f7c2ea9..ed6f4ba08afc 100644
> --- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> @@ -153,6 +153,67 @@ usb1: usb@31200000{
>   			dr_mode = "otg";
>   		};
>   	};
> +
> +	main_r5fss0: r5fss@78400000 {
> +		compatible = "ti,am62-r5fss";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x78400000 0x00 0x78400000 0x8000>,
> +			 <0x78500000 0x00 0x78500000 0x8000>;
> +		power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +
> +		main_r5fss0_core0: r5f@78400000 {
> +			compatible = "ti,am62-r5f";
> +			reg = <0x78400000 0x00008000>,
> +			      <0x78500000 0x00008000>;
> +			reg-names = "atcm", "btcm";
> +			resets = <&k3_reset 262 1>;
> +			firmware-name = "j722s-main-r5f0_0-fw";

Reviewed-by: Udit Kumar <u-kumar1@ti.com>

> +			ti,sci = <&dmsc>;
> +			ti,sci-dev-id = <262>;
> +			ti,sci-proc-ids = <0x04 0xff>;
> +			ti,atcm-enable = <1>;
> +			ti,btcm-enable = <1>;
> +			ti,loczrama = <1>;
> +		};
> +	};
> +
> +	c7x_0: dsp@7e000000 {
> +		compatible = "ti,am62a-c7xv-dsp";
> +		reg = <0x00 0x7e000000 0x00 0x00200000>;
> +		reg-names = "l2sram";
> +		resets = <&k3_reset 208 1>;
> +		firmware-name = "j722s-c71_0-fw";
> +		ti,sci = <&dmsc>;
> +		ti,sci-dev-id = <208>;
> +		ti,sci-proc-ids = <0x30 0xff>;
> +		status = "disabled";
> +	};
> +
> +	c7x_1: dsp@7e200000 {
> +		compatible = "ti,am62a-c7xv-dsp";
> +		reg = <0x00 0x7e200000 0x00 0x00200000>;
> +		reg-names = "l2sram";
> +		resets = <&k3_reset 268 1>;
> +		firmware-name = "j722s-c71_1-fw";
> +		ti,sci = <&dmsc>;
> +		ti,sci-dev-id = <268>;
> +		ti,sci-proc-ids = <0x31 0xff>;
> +		status = "disabled";
> +	};
> +};
> +
> +/* MCU domain overrides */
> +
> +&mcu_r5fss0_core0 {
> +	firmware-name = "j722s-mcu-r5f0_0-fw";
> +};
> +
> +/* Wakeup domain overrides */
> +
> +&wkup_r5fss0_core0 {
> +	firmware-name = "j722s-wkup-r5f0_0-fw";
>   };
>   
>   &main_conf {

  reply	other threads:[~2024-08-30 15:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-29  6:09 [PATCH v4 0/2] Add Remoteproc Support for TI's J722S SoCs Beleswar Padhi
2024-08-29  6:09 ` [PATCH v4 1/2] arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes Beleswar Padhi
2024-08-30 15:10   ` Kumar, Udit [this message]
2024-08-30 15:21   ` Andrew Davis
2024-08-29  6:09 ` [PATCH v4 2/2] arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication Beleswar Padhi
2024-08-30 13:57   ` Kumar, Udit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d6bf10b1-9671-4c21-8093-48a4065ceb3c@ti.com \
    --to=u-kumar1@ti.com \
    --cc=afd@ti.com \
    --cc=b-padhi@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=j-choudhary@ti.com \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=vaishnav.a@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®