Re: [PATCH 1/2] dt-bindings: input: Add Nuvoton MA35D1 keypad

[Ming-Jen Chen <mjchen0829@gmail.com>]

On 2024/10/29 下午 09:19, Krzysztof Kozlowski wrote:
> On 29/10/2024 03:00, Ming-Jen Chen wrote:
>>>>>>>> +
>>>>>>>> +  per-scale:
>>>>>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>>>>>> +    description: Row Scan Cycle Pre-scale Value (1 to 256).
>>>>>>> Missing constraints
>>>>>>>
>>>>>>>> +
>>>>>>>> +  per-scalediv:
>>>>>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>>>>>> +    description: Per-scale divider (1 to 256).
>>>>>>> Missing constraints
>>>>>>>
>>>>>>> Both properties are unexpected... aren't you duplicating existing
>>>>>>> properties?
>>>>>> pre-scale:
>>>>>> This value configures the IC register for the row scan cycle
>>>>>> pre-scaling, with valid values ranging from 1 to 256
>>>>>> per-scalediv:(I will change pre-scalediv to pre-scale-div)
>>>>> Please look for matching existing properties first.
>>>> I will change it to the following content:
>>>>
>>>> nuvoton,scan-time:
>>> Why? What about my request?
>> I utilized|grep|  to search for relevant properties in the|input/|  folder using keywords such as|scan|,|time|,|period|,|freq|, and|interval|.
>> While I found some similar properties, I did not locate any that completely meet my requirements.
>>
>> For example, I found|"scanning_period"|, which is described as "Time between scans. Each step is 1024 us. Valid 1-256."
>> I would like to confirm if you are suggesting that I use|scanning_period|  and explain my specific use case in the description,
>> for example:
> Description of these properties did not tell me much about their purpose
> and underlying hardware, so I don't know which fits here. It looks like
> you want to configure clock... but then wording confuses me -
> "per-scale". What is "per"? Isn't it usually "pre"?
>
> So in general I don't know what to recommend you because your patch is
> really unclear.
>
> Please also wrap emails according to mailing lists standards. And use
> proper line separation of sentences. It's really hard to understand your
> email.

I apologize for any confusion caused by my previous responses regarding 
this issue.
It seems that our discussion has reached a bit of a bottleneck.

I have a suggestion that I hope you might agree with: I would like to 
upload version 2 of the code.
In this version, I will rewrite the properties, although it may not 
resolve their underlying issues.
I will also continue to keep our current discussion ongoing in version 2.

Thank you for your understanding, and I look forward to your thoughts on 
this approach


>
>> nuvoton,scanning-period:
>>       type:  uint32
>>       description:  | Set the scan time for each key, specified in terms of keypad IP clock
>> cycles. The valid range is from 1 to 256.      minimum:  1
>>       maximum:  256 Could you please confirm if this approach aligns with your suggestion,
>>    or if you have any other recommended existing properties?
> Why this would be board dependent?
>
> Best regards,
> Krzysztof
>