[PATCH net-next v3] net: ethernet: mtk_eth_soc: convert cap_bit in mtk_eth_muxc struct to u64

[Daniel Golle <daniel@makrotopia.org>]

From: Bo-Cun Chen <bc-bocun.chen@mediatek.com>

The capabilities bitfield was converted to a 64-bit value, but a cap_bit
in struct mtk_eth_muxc which is used to store a full bitfield (rather
than the bit number, as the name would suggest) still holds only a
32-bit value.

Change the type of cap_bit to u64 in order to avoid truncating the
bitfield which results in path selection to not work with capabilities
above the 32-bit limit.

The values currently stored in the cap_bit field are
MTK_ETH_MUX_GDM1_TO_GMAC1_ESW:
 BIT_ULL(18) | BIT_ULL(5)

MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY:
 BIT_ULL(19) | BIT_ULL(5) | BIT_ULL(6)

MTK_ETH_MUX_U3_GMAC2_TO_QPHY:
 BIT_ULL(20) | BIT_ULL(5) | BIT_ULL(6)

MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII:
 BIT_ULL(20) | BIT_ULL(5) | BIT_ULL(7)

MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII:
 BIT_ULL(21) | BIT_ULL(5)

While all those values are currently still within 32-bit boundaries,
the addition of new capabilities of MT7988 as well as future SoC's
like MT7987 will exceed them. Also, the use of a 32-bit 'int' type to
store the result of a BIT_ULL(...) is misleading.

Fixes: 51a4df60db5c2 ("net: ethernet: mtk_eth_soc: convert caps in mtk_soc_data struct to u64")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v3: improve commit message, target net-next instead of net tree

 drivers/net/ethernet/mediatek/mtk_eth_path.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_path.c b/drivers/net/ethernet/mediatek/mtk_eth_path.c
index 7c27a19c4d8f4..6fbfb16438a51 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_path.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_path.c
@@ -14,7 +14,7 @@
 
 struct mtk_eth_muxc {
 	const char	*name;
-	int		cap_bit;
+	u64		cap_bit;
 	int		(*set_path)(struct mtk_eth *eth, u64 path);
 };
 
-- 
2.49.0