On Wed, 11 Jun 2025, Jiri Slaby (SUSE) wrote:

> DEBUG_AUTOCONF() is always disabled (by "#if 0"), so one would need to
> recompile the kernel to use it. And even if they did, they would find
> out it is broken anyway:
>   error: variable 'scratch' is used uninitialized whenever 'if' condition is false
> 
> Drop it.
> 
> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
> ---
>  drivers/tty/serial/8250/8250_port.c | 39 ++---------------------------
>  1 file changed, 2 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index 6363915a1787..e93bfdac3d0e 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -38,15 +38,6 @@
>  
>  #include "8250.h"
>  
> -/*
> - * Debugging.
> - */
> -#if 0
> -#define DEBUG_AUTOCONF(fmt...)	printk(fmt)
> -#else
> -#define DEBUG_AUTOCONF(fmt...)	do { } while (0)
> -#endif
> -
>  /*
>   * Here we define the default xmit fifo size used for each type of UART.
>   */
> @@ -825,8 +816,6 @@ static void autoconfig_has_efr(struct uart_8250_port *up)
>  	id3 = serial_icr_read(up, UART_ID3);
>  	rev = serial_icr_read(up, UART_REV);
>  
> -	DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
> -
>  	if (id1 == 0x16 && id2 == 0xC9 &&
>  	    (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
>  		up->port.type = PORT_16C950;
> @@ -850,7 +839,6 @@ static void autoconfig_has_efr(struct uart_8250_port *up)
>  	 *  0x14 - XR16C854.
>  	 */
>  	id1 = autoconfig_read_divisor_id(up);
> -	DEBUG_AUTOCONF("850id=%04x ", id1);
>  
>  	id2 = id1 >> 8;
>  	if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
> @@ -937,7 +925,6 @@ static void autoconfig_16550a(struct uart_8250_port *up)
>  	if (serial_in(up, UART_EFR) == 0) {
>  		serial_out(up, UART_EFR, 0xA8);
>  		if (serial_in(up, UART_EFR) != 0) {
> -			DEBUG_AUTOCONF("EFRv1 ");
>  			up->port.type = PORT_16650;
>  			up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
>  		} else {
> @@ -950,8 +937,6 @@ static void autoconfig_16550a(struct uart_8250_port *up)
>  
>  			if (status1 == UART_IIR_FIFO_ENABLED_16750)
>  				up->port.type = PORT_16550A_FSL64;
> -			else
> -				DEBUG_AUTOCONF("Motorola 8xxx DUART ");
>  		}
>  		serial_out(up, UART_EFR, 0);
>  		return;
> @@ -963,7 +948,6 @@ static void autoconfig_16550a(struct uart_8250_port *up)
>  	 */
>  	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
>  	if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
> -		DEBUG_AUTOCONF("EFRv2 ");
>  		autoconfig_has_efr(up);
>  		return;
>  	}
> @@ -1026,8 +1010,6 @@ static void autoconfig_16550a(struct uart_8250_port *up)
>  
>  	serial_out(up, UART_LCR, 0);
>  
> -	DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
> -
>  	if (status1 == UART_IIR_FIFO_ENABLED_16550A &&
>  	    status2 == UART_IIR_FIFO_ENABLED_16750) {
>  		up->port.type = PORT_16750;
> @@ -1056,17 +1038,10 @@ static void autoconfig_16550a(struct uart_8250_port *up)
>  			 * It's an Xscale.
>  			 * We'll leave the UART_IER_UUE bit set to 1 (enabled).
>  			 */
> -			DEBUG_AUTOCONF("Xscale ");
>  			up->port.type = PORT_XSCALE;
>  			up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;
>  			return;
>  		}
> -	} else {
> -		/*
> -		 * If we got here we couldn't force the IER_UUE bit to 0.
> -		 * Log it and continue.
> -		 */
> -		DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
>  	}
>  	serial_out(up, UART_IER, iersave);
>  
> @@ -1098,9 +1073,6 @@ static void autoconfig(struct uart_8250_port *up)
>  	if (!port->iobase && !port->mapbase && !port->membase)
>  		return;
>  
> -	DEBUG_AUTOCONF("%s: autoconf (0x%04lx, 0x%p): ",
> -		       port->name, port->iobase, port->membase);
> -
>  	/*
>  	 * We really do need global IRQs disabled here - we're going to
>  	 * be frobbing the chips IRQ enable register to see if it exists.
> @@ -1147,9 +1119,7 @@ static void autoconfig(struct uart_8250_port *up)
>  			 * We failed; there's nothing here
>  			 */
>  			uart_port_unlock_irqrestore(port, flags);
> -			DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
> -				       scratch2, scratch3);
> -			goto out;
> +			return;
>  		}
>  	}
>  
> @@ -1171,9 +1141,7 @@ static void autoconfig(struct uart_8250_port *up)
>  		serial8250_out_MCR(up, save_mcr);
>  		if (status1 != (UART_MSR_DCD | UART_MSR_CTS)) {
>  			uart_port_unlock_irqrestore(port, flags);
> -			DEBUG_AUTOCONF("LOOP test failed (%02x) ",
> -				       status1);
> -			goto out;
> +			return;
>  		}
>  	}
>  
> @@ -1241,9 +1209,6 @@ static void autoconfig(struct uart_8250_port *up)
>  		dev_warn(port->dev, "detected caps %08x should be %08x\n",
>  			 old_capabilities, up->capabilities);
>  	}
> -out:
> -	DEBUG_AUTOCONF("iir=%d ", scratch);
> -	DEBUG_AUTOCONF("type=%s\n", uart_config[port->type].name);
>  }
>  
>  static void autoconfig_irq(struct uart_8250_port *up)
> 

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

-- 
 i.