From: Lian Wang <lianux.mm@gmail.com>
To: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
chrisl@kernel.org, nphamcs@gmail.com, baoquan.he@linux.dev,
baohua@kernel.org, youngjun.park@lge.com,
shikemeng@huaweicloud.com, kasong@tencent.com,
linjh22s@gmail.com, kunwu.chan@linux.dev, kees@kernel.org,
gustavoars@kernel.org, tglx@kernel.org,
linux-hardening@vger.kernel.org
Subject: [RFC PATCH v3 05/18] mm/swap: change the swapon lock into a percpu rwsem
Date: Wed, 28 Oct 2026 00:05:48 +0800 [thread overview]
Message-ID: <d7120017ded998ca722ed78e1995f0d1af82e88c.1793106426.git.lianux.mm@gmail.com> (raw)
In-Reply-To: <cover.1793106426.git.lianux.mm@gmail.com>
From: Kairui Song <kasong@tencent.com>
Reading swap metadata is a common hot path, while swapon and swapoff
are costly and very rare. Convert the existing swap_lock spinlock
into a percpu rwsem so that readers can run concurrently without
contention. This is a first step toward cleaning up the swap lock
model and we might already see a performance gain for existing
readers.
Also update the comments in swap_info_struct to reflect the lock
name change.
Signed-off-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Lian Wang <lianux.mm@gmail.com>
---
include/linux/swap.h | 10 ++--
mm/swapfile.c | 129 +++++++++++++++++++++++--------------------
2 files changed, 73 insertions(+), 66 deletions(-)
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 66b8e602178d..80a14a8daba2 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -191,17 +191,17 @@ struct swap_extent {
/*
* Swap device flags, except the ones documented below, all are immutable
* after exposed by swap_device_enable, and until the device is freed again
- * (SWP_USED unset). The exceptions:
- * - SWP_USED: Protected by swap_lock. Indicates the device is inuse. Once
+ * (SWP_USED unset). The exceptions are all protected by swapon_rwsem:
+ * - SWP_USED: Protected by swapon_rwsem. Indicates the device is inuse. Once
* set, won't be cleared unless all reference to this device is freed and
* swapoff finished.
- * - SWP_WRITEOK: Protected by both swap_lock and swap_avail_lock, clearing
+ * - SWP_WRITEOK: Protected by both swapon_rwsem and swap_avail_lock, clearing
* this flag also waits for all current cluster lock users to exit so
* checking this flag while holding any of these locks ensures the device
* is safe to use at the moment. Note: clearing this flag doesn't affect
* pending IO or async requests, it only prevents further entry allocation
* or new async request (e.g. discard) from initiating.
- * - SWP_HIBERNATION: Protected by swap_lock. Indicates if the device
+ * - SWP_HIBERNATION: Protected by swapon_rwsem. Indicates if the device
* is pinned for hibernation.
*/
enum {
@@ -274,7 +274,7 @@ struct swap_info_struct {
spinlock_t lock; /*
* Protect cluster lists. Other fields
* are only changed at swapon/swapoff,
- * so are protected by swap_lock.
+ * so are protected by swapon_rwsem.
*/
struct work_struct discard_work; /* discard worker */
struct work_struct reclaim_work; /* reclaim worker */
diff --git a/mm/swapfile.c b/mm/swapfile.c
index b72f4fc3e811..4ffde6827d44 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -57,23 +57,29 @@ static void move_cluster(struct swap_info_struct *si,
enum swap_cluster_flags new_flags);
/*
- * Protects the swap_info array, and the SWP_USED flag. swap_info contains
- * lazily allocated & freed swap device info struts, and SWP_USED indicates
- * which device is used, ~SWP_USED devices and can be reused.
- *
- * Also protects swap_active_head total_swap_pages, and the SWP_WRITEOK flag.
+ * Serializes swapon/swapoff (writers) and protects the swap_info
+ * array, nr_swapfiles, total_swap_pages, and part of swap device
+ * info content (see comment of swap_info_struct). Readers
+ * (allocation, /proc/swaps, etc.) take percpu_down_read() which
+ * is cheap as the hot path.
+ */
+DEFINE_STATIC_PERCPU_RWSEM(swapon_rwsem);
+/*
+ * swap_info contains lazily allocated swap device info structs, and
+ * SWP_USED indicates which device is used, ~SWP_USED devices can be
+ * reused. Protected by swapon_rwsem, but reading could be lockless.
*/
-static DEFINE_SPINLOCK(swap_lock);
+struct swap_info_struct *swap_info[MAX_SWAPFILES];
static unsigned int nr_swapfiles;
-atomic_long_t nr_swap_pages;
+long total_swap_pages;
+
/*
* Some modules use swappable objects and may try to swap them out under
* memory pressure (via the shrinker). Before doing so, they may wish to
* check to see if any swap space is available.
*/
+atomic_long_t nr_swap_pages;
EXPORT_SYMBOL_GPL(nr_swap_pages);
-/* protected with swap_lock. reading in vm_swap_full() doesn't need lock */
-long total_swap_pages;
#define DEF_SWAP_PRIO -1
unsigned long swapfile_maximum_size;
#ifdef CONFIG_MIGRATION
@@ -85,7 +91,7 @@ static const char Bad_offset[] = "Bad swap offset entry ";
/*
* all active swap_info_structs
- * protected with swap_lock, and ordered by priority.
+ * protected with swapon_rwsem, and ordered by priority.
*/
static PLIST_HEAD(swap_active_head);
@@ -95,20 +101,18 @@ static PLIST_HEAD(swap_active_head);
* This is used by folio_alloc_swap() instead of swap_active_head
* because swap_active_head includes all swap_info_structs,
* but folio_alloc_swap() doesn't need to look at full ones.
- * This uses its own lock instead of swap_lock because when a
+ * This uses its own lock instead of swapon_rwsem because when a
* swap_info_struct changes between not-full/full, it needs to
* add/remove itself to/from this list, but the swap_info_struct->lock
- * is held and the locking order requires swap_lock to be taken
+ * is held and the locking order requires swapon_rwsem to be taken
* before any swap_info_struct->lock.
*/
static PLIST_HEAD(swap_avail_head);
static DEFINE_SPINLOCK(swap_avail_lock);
-struct swap_info_struct *swap_info[MAX_SWAPFILES];
-
static inline struct swap_info_struct *__swap_iter(int *i, unsigned long flag)
{
- lockdep_assert_held(&swap_lock);
+ lockdep_assert_held(&swapon_rwsem);
while (*i < nr_swapfiles) {
struct swap_info_struct *si = __swap_type_to_info(*i);
@@ -128,7 +132,7 @@ static inline struct swap_info_struct *__swap_iter(int *i, unsigned long flag)
* for_each_swap - iterate through all allocated and inuse swap devices
* @si: the iterator
*
- * Context: The caller must hold swap_lock. The lock may be dropped during
+ * Context: The caller must hold swapon_rwsem. The lock may be dropped during
* the loop body but must be re-acquired before the next iteration.
*/
#define for_each_swap(si) __for_each_swap(si, SWP_USED)
@@ -1377,10 +1381,10 @@ static bool get_swap_device_info(struct swap_info_struct *si)
/*
* Guarantee the si->users are checked before accessing other
* fields of swap_info_struct, and si->flags (SWP_WRITEOK) is
- * up to dated.
+ * up to date.
*
- * Paired with the spin_unlock() after setup_swap_info() in
- * swap_device_enable(), and smp_wmb() in swapoff.
+ * Paired with percpu_up_write() in swap_device_enable(), and
+ * smp_wmb() after clearing SWP_WRITEOK in swapoff.
*/
smp_rmb();
return true;
@@ -1465,10 +1469,10 @@ static bool swap_sync_discard(void)
bool ret = false;
struct swap_info_struct *si, *next;
- spin_lock(&swap_lock);
+ percpu_down_read(&swapon_rwsem);
start_over:
plist_for_each_entry_safe(si, next, &swap_active_head, list) {
- spin_unlock(&swap_lock);
+ percpu_up_read(&swapon_rwsem);
if (get_swap_device_info(si)) {
if (si->flags & SWP_PAGE_DISCARD)
ret = swap_do_scheduled_discard(si);
@@ -1477,11 +1481,11 @@ start_over:
if (ret)
return true;
- spin_lock(&swap_lock);
+ percpu_down_read(&swapon_rwsem);
if (plist_node_empty(&next->list))
goto start_over;
}
- spin_unlock(&swap_lock);
+ percpu_up_read(&swapon_rwsem);
return false;
}
@@ -2294,7 +2298,7 @@ int pin_hibernation_swap_type(dev_t device, sector_t offset)
int ret;
struct swap_info_struct *si;
- spin_lock(&swap_lock);
+ percpu_down_write(&swapon_rwsem);
ret = __find_hibernation_swap_type(device, offset);
if (ret < 0)
goto out;
@@ -2318,7 +2322,7 @@ int pin_hibernation_swap_type(dev_t device, sector_t offset)
si->flags |= SWP_HIBERNATION;
out:
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
return ret;
}
@@ -2330,7 +2334,7 @@ out:
*
* Look up the swap device for @device/@offset and atomically transfer
* the SWP_HIBERNATION pin from @old_type (if valid) to the new device,
- * all under a single swap_lock critical section. This closes the
+ * all under a single swapon_rwsem writer section. This closes the
* swapoff() window that exists when callers unpin and re-pin in two
* separate operations.
*
@@ -2350,28 +2354,28 @@ int repin_hibernation_swap_type(int old_type, dev_t device, sector_t offset)
struct swap_info_struct *old_si, *new_si;
int new_type;
- spin_lock(&swap_lock);
+ percpu_down_write(&swapon_rwsem);
new_type = __find_hibernation_swap_type(device, offset);
if (new_type < 0) {
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
return new_type;
}
new_si = swap_type_to_info(new_type);
if (WARN_ON_ONCE(!new_si)) {
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
return -ENODEV;
}
old_si = swap_type_to_info(old_type);
if (new_si == old_si) {
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
return new_type;
}
if (WARN_ON_ONCE(new_si->flags & SWP_HIBERNATION)) {
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
return -EBUSY;
}
@@ -2379,7 +2383,7 @@ int repin_hibernation_swap_type(int old_type, dev_t device, sector_t offset)
old_si->flags &= ~SWP_HIBERNATION;
new_si->flags |= SWP_HIBERNATION;
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
return new_type;
}
@@ -2397,11 +2401,11 @@ void unpin_hibernation_swap_type(int type)
{
struct swap_info_struct *si;
- spin_lock(&swap_lock);
+ percpu_down_write(&swapon_rwsem);
si = swap_type_to_info(type);
if (si)
si->flags &= ~SWP_HIBERNATION;
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
}
/**
@@ -2426,9 +2430,9 @@ int find_hibernation_swap_type(dev_t device, sector_t offset)
{
int type;
- spin_lock(&swap_lock);
+ percpu_down_read(&swapon_rwsem);
type = __find_hibernation_swap_type(device, offset);
- spin_unlock(&swap_lock);
+ percpu_up_read(&swapon_rwsem);
return type;
}
@@ -2438,13 +2442,13 @@ int find_first_swap(dev_t *device)
int ret = -ENODEV;
struct swap_info_struct *si;
- spin_lock(&swap_lock);
+ percpu_down_read(&swapon_rwsem);
for_each_avail_swap(si) {
*device = si->bdev->bd_dev;
ret = si->type;
break;
}
- spin_unlock(&swap_lock);
+ percpu_up_read(&swapon_rwsem);
return ret;
}
@@ -2473,7 +2477,7 @@ unsigned int count_swap_pages(int type, int free)
{
unsigned int n = 0;
- spin_lock(&swap_lock);
+ percpu_down_read(&swapon_rwsem);
if ((unsigned int)type < nr_swapfiles) {
struct swap_info_struct *sis = swap_info[type];
@@ -2485,7 +2489,7 @@ unsigned int count_swap_pages(int type, int free)
}
spin_unlock(&sis->lock);
}
- spin_unlock(&swap_lock);
+ percpu_up_read(&swapon_rwsem);
return n;
}
#endif /* CONFIG_HIBERNATION */
@@ -2801,10 +2805,10 @@ static unsigned int find_next_to_unuse(struct swap_info_struct *si,
unsigned long swp_tb;
/*
- * No need for swap_lock here: we're just looking
+ * No need for swapon_rwsem here: we're just looking
* for whether an entry is in use, not modifying it; false
* hits are okay, and sys_swapoff() has already prevented new
- * allocations from this area (while holding swap_lock).
+ * allocations from this area (while holding swapon_rwsem).
*/
i = prev + 1;
while (i < si->max) {
@@ -2942,8 +2946,8 @@ success:
/*
* After a successful try_to_unuse, if no swap is now in use, we know
- * we can empty the mmlist. swap_lock must be held on entry and exit.
- * Note that mmlist_lock nests inside swap_lock, and an mm must be
+ * we can empty the mmlist. swapon_rwsem must be held on entry and exit.
+ * Note that mmlist_lock nests inside swapon_rwsem, and an mm must be
* added to the mmlist just after page_duplicate - before would be racy.
*/
static void drain_mmlist(void)
@@ -3095,8 +3099,7 @@ static int setup_swap_extents(struct swap_info_struct *sis,
*/
static void swap_device_enable(struct swap_info_struct *si)
{
- spin_lock(&swap_lock);
-
+ percpu_down_write(&swapon_rwsem);
spin_lock(&swap_avail_lock);
si->flags |= SWP_WRITEOK;
spin_unlock(&swap_avail_lock);
@@ -3104,7 +3107,7 @@ static void swap_device_enable(struct swap_info_struct *si)
atomic_long_add(si->pages, &nr_swap_pages);
total_swap_pages += si->pages;
plist_add(&si->list, &swap_active_head);
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
add_to_avail_list(si);
}
@@ -3117,7 +3120,7 @@ static int swap_device_disable(struct address_space *mapping,
unsigned long offset, end;
int err = -EINVAL;
- spin_lock(&swap_lock);
+ percpu_down_write(&swapon_rwsem);
plist_for_each_entry(si, &swap_active_head, list) {
if ((si->flags & SWP_WRITEOK) &&
si->swap_file->f_mapping == mapping) {
@@ -3152,14 +3155,14 @@ static int swap_device_disable(struct address_space *mapping,
end = ALIGN(si->max, SWAPFILE_CLUSTER);
unlock:
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
if (err)
return err;
del_from_avail_list(si, true);
/*
- * The swap allocator doesn't take swap_lock. Looping through every
+ * The swap allocator doesn't take swapon_rwsem. Looping through every
* cluster lock after clearing SWP_WRITEOK ensures that allocators see
* the updated flag and that no allocation remains in flight.
*/
@@ -3273,7 +3276,7 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
atomic_dec(&nr_rotate_swap);
mutex_lock(&swapon_mutex);
- spin_lock(&swap_lock);
+ percpu_down_write(&swapon_rwsem);
spin_lock(&p->lock);
drain_mmlist();
@@ -3284,7 +3287,7 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
p->max = 0;
p->cluster_info = NULL;
spin_unlock(&p->lock);
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
arch_swap_invalidate_area(p->type);
zswap_swapoff(p->type);
mutex_unlock(&swapon_mutex);
@@ -3303,10 +3306,14 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
* Clear the SWP_USED flag after all resources are freed so that swapon
* can reuse this swap_info in alloc_swap_info() safely. It is ok to
* not hold p->lock after we cleared its SWP_WRITEOK.
+ *
+ * The write lock ensures the flag clear is visible to lockless
+ * readers of swap_type_to_info() before alloc_swap_info() reuses
+ * this slot.
*/
- spin_lock(&swap_lock);
+ percpu_down_write(&swapon_rwsem);
p->flags = 0;
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
atomic_inc(&proc_poll_event);
wake_up_interruptible(&proc_poll_wait);
@@ -3466,13 +3473,13 @@ static struct swap_info_struct *alloc_swap_info(void)
return ERR_PTR(-ENOMEM);
}
- spin_lock(&swap_lock);
+ percpu_down_write(&swapon_rwsem);
for (type = 0; type < nr_swapfiles; type++) {
if (!(swap_info[type]->flags & SWP_USED))
break;
}
if (type >= MAX_SWAPFILES) {
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
percpu_ref_exit(&p->users);
kvfree(p);
return ERR_PTR(-EPERM);
@@ -3497,7 +3504,7 @@ static struct swap_info_struct *alloc_swap_info(void)
plist_node_init(&p->list, 0);
plist_node_init(&p->avail_list, 0);
p->flags = SWP_USED;
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
if (defer) {
percpu_ref_exit(&defer->users);
kvfree(defer);
@@ -3933,9 +3940,9 @@ bad_swap:
* Clear the SWP_USED flag after all resources are freed so
* alloc_swap_info can reuse this si safely.
*/
- spin_lock(&swap_lock);
+ percpu_down_write(&swapon_rwsem);
si->flags = 0;
- spin_unlock(&swap_lock);
+ percpu_up_write(&swapon_rwsem);
if (inced_nr_rotate_swap)
atomic_dec(&nr_rotate_swap);
if (swap_file)
@@ -3953,14 +3960,14 @@ void si_swapinfo(struct sysinfo *val)
struct swap_info_struct *si;
unsigned long nr_to_be_unused = 0;
- spin_lock(&swap_lock);
+ percpu_down_read(&swapon_rwsem);
for_each_swap(si) {
if (!(si->flags & SWP_WRITEOK))
nr_to_be_unused += swap_usage_in_pages(si);
}
val->freeswap = atomic_long_read(&nr_swap_pages) + nr_to_be_unused;
val->totalswap = total_swap_pages + nr_to_be_unused;
- spin_unlock(&swap_lock);
+ percpu_up_read(&swapon_rwsem);
}
/*
next prev parent reply other threads:[~2026-10-27 16:06 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-27 15:58 [RFC PATCH v3 00/18] mm/swap: introduce priority queues for swap device allocation Lian Wang
2026-10-27 16:03 ` [RFC PATCH v3 01/18] mm/swap: remove unused parameter for reading swap header Lian Wang
2026-10-27 16:03 ` [RFC PATCH v3 02/18] mm/swap: slightly cleanup the code for hibernation error handling Lian Wang
2026-10-27 16:04 ` [RFC PATCH v3 03/18] mm/swap: cleanup and document swap device availability flag usage Lian Wang
2026-10-27 16:05 ` [RFC PATCH v3 04/18] mm/swap: introduce swap device iteration helper Lian Wang
2026-10-27 16:05 ` Lian Wang [this message]
2026-10-27 16:06 ` [RFC PATCH v3 06/18] mm/swap: serialize swap publication before removing swapon mutex Lian Wang
2026-10-27 16:07 ` [RFC PATCH v3 07/18] mm/swap: consolidate swap inuse accounting helpers Lian Wang
2026-10-27 16:07 ` [RFC PATCH v3 08/18] mm/swap: change back to use each swap device's percpu cluster Lian Wang
2026-10-27 16:08 ` [RFC PATCH v3 09/18] mm/swap: avoid direct reclaim when populating swap cluster metadata Lian Wang
2026-10-27 16:08 ` [RFC PATCH v3 10/18] mm/swap: add priority queue for swap device allocation Lian Wang
2026-10-27 16:09 ` [RFC PATCH v3 11/18] mm/swap: remove available list Lian Wang
2026-10-27 16:10 ` [RFC PATCH v3 12/18] mm/swap: bound synchronous discard during allocation Lian Wang
2026-10-27 16:11 ` [RFC PATCH v3 13/18] mm/swap: drop swap active plist Lian Wang
2026-10-27 16:11 ` [RFC PATCH v3 14/18] lib/plist.c: remove requeue function Lian Wang
2026-10-27 16:12 ` [RFC PATCH v3 15/18] mm/swap: reuse per-CPU queue readers across priority changes Lian Wang
2026-10-27 16:12 ` [RFC PATCH v3 16/18] mm/swap: advance the global queue cursor directly between priority rings Lian Wang
2026-10-27 16:13 ` [RFC PATCH v3 17/18] mm/swap: skip reader rotation for single-device " Lian Wang
2026-10-27 16:14 ` [RFC PATCH v3 18/18] mm/swap: redistribute queue readers after membership changes Lian Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d7120017ded998ca722ed78e1995f0d1af82e88c.1793106426.git.lianux.mm@gmail.com \
--to=lianux.mm@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baoquan.he@linux.dev \
--cc=chrisl@kernel.org \
--cc=gustavoars@kernel.org \
--cc=kasong@tencent.com \
--cc=kees@kernel.org \
--cc=kunwu.chan@linux.dev \
--cc=linjh22s@gmail.com \
--cc=linux-hardening@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nphamcs@gmail.com \
--cc=shikemeng@huaweicloud.com \
--cc=tglx@kernel.org \
--cc=youngjun.park@lge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®