Re: [PATCH v3 0/5] Add support for the STM32F7 I2C

[Pierre Yves MORDRET <pierre-yves.mordret@st.com>]

On 07/06/2017 05:53 PM, Pierre-Yves MORDRET wrote:
> This patchset adds support for the I2C controller embedded in STM32F7xx SoC.
> It enables I2C transfer in interrupt mode with Standard-mode, Fast-mode and
> Fast-mode+ bus speed.

Gentle ping for driver review since DT Bindings has been acked by Rob 
Herring.

Thanks
Py

> ---
>   Version history:
>      v3:
>          * Move stm32f7_i2c_match above stm32f7_i2c_driver
>          * of_device_get_match_data instead of of_match_device
>          * Improve I2C Speed DT gathering
>          * dev_err into dev_dbg for Arbitration loss
>          * Remove useless space aligned
> 
>      v2:
>          * Implement an I2C timings computation algorithm instead of static
>            values(bindings). Algorithm uses generic I2C SCL Falling/Rising
>            bindings and System clock to compute its timings.
>          * I2C Device Tree Update
> ---
> Pierre-Yves MORDRET (5):
>    dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings
>    i2c: i2c-stm32f4: use generic definition of speed enum
>    i2c: i2c-stm32f7: add driver
>    ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
>    ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
> 
>   .../devicetree/bindings/i2c/i2c-stm32.txt          |  29 +-
>   arch/arm/boot/dts/stm32746g-eval.dts               |   8 +
>   arch/arm/boot/dts/stm32f746.dtsi                   |  22 +
>   drivers/i2c/busses/Kconfig                         |  10 +
>   drivers/i2c/busses/Makefile                        |   1 +
>   drivers/i2c/busses/i2c-stm32.h                     |  20 +
>   drivers/i2c/busses/i2c-stm32f4.c                   |  18 +-
>   drivers/i2c/busses/i2c-stm32f7.c                   | 974 +++++++++++++++++++++
>   8 files changed, 1068 insertions(+), 14 deletions(-)
>   create mode 100644 drivers/i2c/busses/i2c-stm32.h
>   create mode 100644 drivers/i2c/busses/i2c-stm32f7.c
>