From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: Rob Herring <robh@kernel.org>
Cc: <vkoul@kernel.org>, <dmaengine@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <dan.j.williams@intel.com>,
<devicetree@vger.kernel.org>
Subject: Re: [PATCH v2 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array
Date: Wed, 18 Sep 2019 17:04:50 +0300 [thread overview]
Message-ID: <d76ffc38-8e68-656a-325b-37de9b01e015@ti.com> (raw)
In-Reply-To: <20190918132835.GA4527@bogus>
On 18/09/2019 16.28, Rob Herring wrote:
> On Tue, Sep 10, 2019 at 02:45:57PM +0300, Peter Ujfalusi wrote:
>> Make the dma-channel-mask to be usable for controllers with more than 32
>> channels.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> ---
>> Documentation/devicetree/bindings/dma/dma-common.yaml | 10 +++++++++-
>> 1 file changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
>> index ed0a49a6f020..41460946be64 100644
>> --- a/Documentation/devicetree/bindings/dma/dma-common.yaml
>> +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
>> @@ -25,11 +25,19 @@ properties:
>> Used to provide DMA controller specific information.
>>
>> dma-channel-mask:
>> - $ref: /schemas/types.yaml#definitions/uint32
>> description:
>> Bitmask of available DMA channels in ascending order that are
>> not reserved by firmware and are available to the
>> kernel. i.e. first channel corresponds to LSB.
>> + allOf:
>> + - $ref: /schemas/types.yaml#/definitions/uint32-array
>> + items:
>> + minItems = 1
>
> '='? Just making up the syntax?
Opps, sorry.
>
>> + maxItems = 255 # Should be enough
>> + - description: Mask of channels 0-31
>> + - description: Mask of channels 32-63
>
> You are mixing a schema and list here...
Should I extend the description with something like this:
"The first item in the array is for channels 0-31, the second is for
channels 32-63, etc."
To make sure that it is used in a correct and consistent manner.
>> + ...
>
> That's end of doc marker in YAML...
I believe I need some reading to do for YAML..
>
>> + - description: Mask of chnanels X-(X+31)
>
> Obviously, this was not validated with 'make dt_binding_check'.
make dt_bindings_check
make: *** No rule to make target 'dt_bindings_check'. Stop.
> What you want is:
>
> allOf:
> - $ref: /schemas/types.yaml#/definitions/uint32-array
> - minItems: 1
> maxItems: 255 # Should be enough
OK and thanks for the comments.
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2019-09-18 14:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-10 11:45 [PATCH v2 0/3] dmaengine: bindings/edma: dma-channel-mask to array Peter Ujfalusi
2019-09-10 11:45 ` [PATCH v2 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array Peter Ujfalusi
2019-09-18 13:28 ` Rob Herring
2019-09-18 14:04 ` Peter Ujfalusi [this message]
2019-09-18 14:21 ` Rob Herring
2019-09-19 8:42 ` Peter Ujfalusi
2019-09-10 11:45 ` [PATCH v2 2/3] dt-bindings: dma: ti-edma: Document dma-channel-mask for EDMA Peter Ujfalusi
2019-09-18 13:29 ` Rob Herring
2019-09-18 14:06 ` Peter Ujfalusi
2019-09-10 11:45 ` [PATCH v2 3/3] dmaengine: ti: edma: Add support for handling reserved channels Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d76ffc38-8e68-656a-325b-37de9b01e015@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®