From: "Martin Jücker" <martin.juecker@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
Russell King <linux@armlinux.org.uk>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Martin Jücker" <martin.juecker@gmail.com>
Subject: [PATCH v2 1/2] ARM: dts: exynos: add charger and battery to p4note
Date: Thu, 3 Feb 2022 21:29:47 +0100 [thread overview]
Message-ID: <d7f7b0f87a18b5cc44ba97390461c15469439829.1643919230.git.martin.juecker@gmail.com> (raw)
Add device tree entry to support the Summit SMB347 charger which is
built into the p4note devices, as well as a simple battery node.
Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
---
Changes in v2:
- squash charger and battery commits
---
arch/arm/boot/dts/exynos4412-p4note.dtsi | 35 ++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index b386a9b8e188..fcd75cceb877 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -16,6 +16,7 @@
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/samsung.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
/ {
compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
@@ -114,6 +115,17 @@ wlan_pwrseq: sdhci3-pwrseq {
clock-names = "ext_clock";
};
+ battery_cell: battery-cell {
+ compatible = "simple-battery";
+ device-chemistry = "lithium-ion";
+ constant-charge-current-max-microamp = <2200000>;
+ precharge-current-microamp = <250000>;
+ charge-term-current-microamp = <250000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+
+ power-supplies = <&power_supply>;
+ };
+
i2c-gpio-1 {
compatible = "i2c-gpio";
sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -182,6 +194,29 @@ stmpe_adc {
};
};
};
+
+ i2c-gpio-4 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power_supply: charger@6 {
+ compatible = "summit,smb347";
+ reg = <0x6>;
+ summit,enable-usb-charging;
+ summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+ summit,fast-voltage-threshold-microvolt = <2600000>;
+ summit,chip-temperature-threshold-celsius = <130>;
+ summit,usb-current-limit-microamp = <1800000>;
+
+ monitored-battery = <&battery_cell>;
+ };
+ };
+
};
&adc {
--
2.25.1
next reply other threads:[~2022-02-03 20:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-03 20:29 Martin Jücker [this message]
2022-02-03 20:29 ` [PATCH v2 2/2] ARM: defconfig: add SMB347 charger driver for p4note Martin Jücker
2022-02-04 15:12 ` [PATCH v2 1/2] ARM: dts: exynos: add charger and battery to p4note Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d7f7b0f87a18b5cc44ba97390461c15469439829.1643919230.git.martin.juecker@gmail.com \
--to=martin.juecker@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®