From: Baolin Wang <baolin.wang@linux.alibaba.com>
To: akpm@linux-foundation.org, hughd@google.com
Cc: willy@infradead.org, david@redhat.com,
wangkefeng.wang@huawei.com, chrisl@kernel.org,
ying.huang@intel.com, 21cnbao@gmail.com, ryan.roberts@arm.com,
shy828301@gmail.com, ziy@nvidia.com, ioworker0@gmail.com,
da.gomez@samsung.com, p.raghav@samsung.com,
baolin.wang@linux.alibaba.com, linux-mm@kvack.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 9/9] mm: shmem: support large folio swap out
Date: Mon, 12 Aug 2024 15:42:10 +0800 [thread overview]
Message-ID: <d80c21abd20e1b0f5ca66b330f074060fb2f082d.1723434324.git.baolin.wang@linux.alibaba.com> (raw)
In-Reply-To: <cover.1723434324.git.baolin.wang@linux.alibaba.com>
Shmem will support large folio allocation [1] [2] to get a better performance,
however, the memory reclaim still splits the precious large folios when trying
to swap out shmem, which may lead to the memory fragmentation issue and can not
take advantage of the large folio for shmeme.
Moreover, the swap code already supports for swapping out large folio without
split, hence this patch set supports the large folio swap out for shmem.
Note the i915_gem_shmem driver still need to be split when swapping, thus
add a new flag 'split_large_folio' for writeback_control to indicate spliting
the large folio.
[1] https://lore.kernel.org/all/cover.1717495894.git.baolin.wang@linux.alibaba.com/
[2] https://lore.kernel.org/all/20240515055719.32577-1-da.gomez@samsung.com/
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
---
drivers/gpu/drm/i915/gem/i915_gem_shmem.c | 1 +
include/linux/writeback.h | 4 +++
mm/shmem.c | 12 ++++++---
mm/vmscan.c | 32 ++++++++++++++++++-----
4 files changed, 38 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/i915/gem/i915_gem_shmem.c b/drivers/gpu/drm/i915/gem/i915_gem_shmem.c
index c5e1c718a6d2..c66cb9c585e1 100644
--- a/drivers/gpu/drm/i915/gem/i915_gem_shmem.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_shmem.c
@@ -308,6 +308,7 @@ void __shmem_writeback(size_t size, struct address_space *mapping)
.range_start = 0,
.range_end = LLONG_MAX,
.for_reclaim = 1,
+ .split_large_folio = 1,
};
unsigned long i;
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 1a54676d843a..10100e22d5c6 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -63,6 +63,7 @@ struct writeback_control {
unsigned range_cyclic:1; /* range_start is cyclic */
unsigned for_sync:1; /* sync(2) WB_SYNC_ALL writeback */
unsigned unpinned_netfs_wb:1; /* Cleared I_PINNING_NETFS_WB */
+ unsigned split_large_folio:1; /* Split large folio for shmem writeback */
/*
* When writeback IOs are bounced through async layers, only the
@@ -79,6 +80,9 @@ struct writeback_control {
*/
struct swap_iocb **swap_plug;
+ /* Target list for splitting a large folio */
+ struct list_head *list;
+
/* internal fields used by the ->writepages implementation: */
struct folio_batch fbatch;
pgoff_t index;
diff --git a/mm/shmem.c b/mm/shmem.c
index 996062dc196b..50aeb03c4d34 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -795,7 +795,6 @@ static int shmem_add_to_page_cache(struct folio *folio,
VM_BUG_ON_FOLIO(index != round_down(index, nr), folio);
VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio);
VM_BUG_ON_FOLIO(!folio_test_swapbacked(folio), folio);
- VM_BUG_ON(expected && folio_test_large(folio));
folio_ref_add(folio, nr);
folio->mapping = mapping;
@@ -1482,10 +1481,11 @@ static int shmem_writepage(struct page *page, struct writeback_control *wbc)
* "force", drivers/gpu/drm/i915/gem/i915_gem_shmem.c gets huge pages,
* and its shmem_writeback() needs them to be split when swapping.
*/
- if (folio_test_large(folio)) {
+ if (wbc->split_large_folio && folio_test_large(folio)) {
+try_split:
/* Ensure the subpages are still dirty */
folio_test_set_dirty(folio);
- if (split_huge_page(page) < 0)
+ if (split_huge_page_to_list_to_order(page, wbc->list, 0))
goto redirty;
folio = page_folio(page);
folio_clear_dirty(folio);
@@ -1527,8 +1527,12 @@ static int shmem_writepage(struct page *page, struct writeback_control *wbc)
}
swap = folio_alloc_swap(folio);
- if (!swap.val)
+ if (!swap.val) {
+ if (nr_pages > 1)
+ goto try_split;
+
goto redirty;
+ }
/*
* Add inode to shmem_unuse()'s list of swapped-out inodes,
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 96ce889ea3d0..ba7b67218caf 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -628,7 +628,7 @@ typedef enum {
* Calls ->writepage().
*/
static pageout_t pageout(struct folio *folio, struct address_space *mapping,
- struct swap_iocb **plug)
+ struct swap_iocb **plug, struct list_head *folio_list)
{
/*
* If the folio is dirty, only perform writeback if that write
@@ -676,6 +676,16 @@ static pageout_t pageout(struct folio *folio, struct address_space *mapping,
.swap_plug = plug,
};
+ /*
+ * The large shmem folio can be split if CONFIG_THP_SWAP is
+ * not enabled or contiguous swap entries are failed to
+ * allocate.
+ */
+ if (shmem_mapping(mapping) && folio_test_large(folio)) {
+ wbc.list = folio_list;
+ wbc.split_large_folio = !IS_ENABLED(CONFIG_THP_SWAP);
+ }
+
folio_set_reclaim(folio);
res = mapping->a_ops->writepage(&folio->page, &wbc);
if (res < 0)
@@ -1257,11 +1267,6 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
goto activate_locked_split;
}
}
- } else if (folio_test_swapbacked(folio) &&
- folio_test_large(folio)) {
- /* Split shmem folio */
- if (split_folio_to_list(folio, folio_list))
- goto keep_locked;
}
/*
@@ -1362,12 +1367,25 @@ static unsigned int shrink_folio_list(struct list_head *folio_list,
* starts and then write it out here.
*/
try_to_unmap_flush_dirty();
- switch (pageout(folio, mapping, &plug)) {
+ switch (pageout(folio, mapping, &plug, folio_list)) {
case PAGE_KEEP:
goto keep_locked;
case PAGE_ACTIVATE:
+ /*
+ * If shmem folio is split when writeback to swap,
+ * the tail pages will make their own pass through
+ * this function and be accounted then.
+ */
+ if (nr_pages > 1 && !folio_test_large(folio)) {
+ sc->nr_scanned -= (nr_pages - 1);
+ nr_pages = 1;
+ }
goto activate_locked;
case PAGE_SUCCESS:
+ if (nr_pages > 1 && !folio_test_large(folio)) {
+ sc->nr_scanned -= (nr_pages - 1);
+ nr_pages = 1;
+ }
stat->nr_pageout += nr_pages;
if (folio_test_writeback(folio))
--
2.39.3
next prev parent reply other threads:[~2024-08-12 7:42 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-12 7:42 [PATCH v5 0/9] support large folio swap-out and swap-in for shmem Baolin Wang
2024-08-12 7:42 ` [PATCH v5 1/9] mm: swap: extend swap_shmem_alloc() to support batch SWAP_MAP_SHMEM flag setting Baolin Wang
2024-08-12 7:42 ` [PATCH v5 2/9] mm: shmem: extend shmem_partial_swap_usage() to support large folio swap Baolin Wang
2024-08-12 7:42 ` [PATCH v5 3/9] mm: shmem: return number of pages beeing freed in shmem_free_swap Baolin Wang
2024-08-12 7:42 ` [PATCH v5 4/9] mm: filemap: use xa_get_order() to get the swap entry order Baolin Wang
2024-08-25 21:55 ` Hugh Dickins
2024-08-25 23:28 ` Matthew Wilcox
2024-08-27 10:10 ` Baolin Wang
2024-08-29 8:07 ` Hugh Dickins
2024-08-29 12:40 ` Baolin Wang
2024-08-30 10:18 ` Hugh Dickins
2024-08-12 7:42 ` [PATCH v5 5/9] mm: shmem: use swap_free_nr() to free shmem swap entries Baolin Wang
2024-08-12 7:42 ` [PATCH v5 6/9] mm: shmem: support large folio allocation for shmem_replace_folio() Baolin Wang
2024-08-25 22:05 ` Hugh Dickins
2024-08-27 3:06 ` Baolin Wang
2024-08-12 7:42 ` [PATCH v5 7/9] mm: shmem: drop folio reference count using 'nr_pages' in shmem_delete_from_page_cache() Baolin Wang
2024-08-12 7:42 ` [PATCH v5 8/9] mm: shmem: split large entry if the swapin folio is not large Baolin Wang
2024-08-25 22:31 ` Hugh Dickins
2024-08-27 6:46 ` Baolin Wang
2024-08-12 7:42 ` Baolin Wang [this message]
2024-08-25 23:14 ` [PATCH v5 9/9] mm: shmem: support large folio swap out Hugh Dickins
2024-08-27 6:58 ` Baolin Wang
2024-08-28 8:28 ` [PATCH] mm: shmem: support large folio swap out fix 2 Baolin Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d80c21abd20e1b0f5ca66b330f074060fb2f082d.1723434324.git.baolin.wang@linux.alibaba.com \
--to=baolin.wang@linux.alibaba.com \
--cc=21cnbao@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=chrisl@kernel.org \
--cc=da.gomez@samsung.com \
--cc=david@redhat.com \
--cc=hughd@google.com \
--cc=ioworker0@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=p.raghav@samsung.com \
--cc=ryan.roberts@arm.com \
--cc=shy828301@gmail.com \
--cc=wangkefeng.wang@huawei.com \
--cc=willy@infradead.org \
--cc=ying.huang@intel.com \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®