mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Damien Riegel <damien.riegel@savoirfairelinux.com>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	kernel@savoirfairelinux.com
Subject: Re: [PATCH v2] ASoC: codecs: msm8916-wcd-analog: configure micbias in mbhc setup
Date: Tue, 3 Oct 2017 21:42:18 +0100	[thread overview]
Message-ID: <d832c3e0-8d39-5880-3210-9b06d2d6ceb8@linaro.org> (raw)
In-Reply-To: <20171003132735.29401-1-damien.riegel@savoirfairelinux.com>



On 03/10/17 14:27, Damien Riegel wrote:
> The very first time a headset is plugged in, detection is unreliable
> because bias hasn't been configured yet, it's done once a mechanical
> insertion interrupt has been triggered, so following insertions (and
> thus detections) are not affected.
> 
> To fix the very first detection, the bias must also be configured in the
> function that setup the MBHC. Move pm8916_wcd_setup_mbhc after
> pm8916_mbhc_configure_bias to avoid a forward declaration.
> 
> Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
> ---
> Changes in v2:
>   - squash the two patches in one patch only

I do not see the squashed patches here??
It looks like its just the first patch.


Thanks,
srini
> 
>   sound/soc/codecs/msm8916-wcd-analog.c | 94 +++++++++++++++++++----------------
>   1 file changed, 50 insertions(+), 44 deletions(-)
> 
> diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
> index f562f2d86907..71494e9dbdcb 100644
> --- a/sound/soc/codecs/msm8916-wcd-analog.c
> +++ b/sound/soc/codecs/msm8916-wcd-analog.c
> @@ -443,50 +443,6 @@ static int pm8916_wcd_analog_enable_micbias_int1(struct
>   						     wcd->micbias1_cap_mode);
>   }
>   
> -static void pm8916_wcd_setup_mbhc(struct pm8916_wcd_analog_priv *wcd)
> -{
> -	struct snd_soc_codec *codec = wcd->codec;
> -	u32 plug_type = 0;
> -	u32 int_en_mask;
> -
> -	snd_soc_write(codec, CDC_A_MBHC_DET_CTL_1,
> -		      CDC_A_MBHC_DET_CTL_L_DET_EN |
> -		      CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_INSERTION |
> -		      CDC_A_MBHC_DET_CTL_MIC_CLAMP_CTL_AUTO |
> -		      CDC_A_MBHC_DET_CTL_MBHC_BIAS_EN);
> -
> -	if (wcd->hphl_jack_type_normally_open)
> -		plug_type |= CDC_A_HPHL_PLUG_TYPE_NO;
> -
> -	if (wcd->gnd_jack_type_normally_open)
> -		plug_type |= CDC_A_GND_PLUG_TYPE_NO;
> -
> -	snd_soc_write(codec, CDC_A_MBHC_DET_CTL_2,
> -		      CDC_A_MBHC_DET_CTL_HS_L_DET_PULL_UP_CTRL_I_3P0 |
> -		      CDC_A_MBHC_DET_CTL_HS_L_DET_COMPA_CTRL_V0P9_VDD |
> -		      plug_type |
> -		      CDC_A_MBHC_DET_CTL_HPHL_100K_TO_GND_EN);
> -
> -
> -	snd_soc_write(codec, CDC_A_MBHC_DBNC_TIMER,
> -		      CDC_A_MBHC_DBNC_TIMER_INSREM_DBNC_T_256_MS |
> -		      CDC_A_MBHC_DBNC_TIMER_BTN_DBNC_T_16MS);
> -
> -	/* enable MBHC clock */
> -	snd_soc_update_bits(codec, CDC_D_CDC_DIG_CLK_CTL,
> -			    DIG_CLK_CTL_D_MBHC_CLK_EN_MASK,
> -			    DIG_CLK_CTL_D_MBHC_CLK_EN);
> -
> -	int_en_mask = MBHC_SWITCH_INT;
> -	if (wcd->mbhc_btn_enabled)
> -		int_en_mask |= MBHC_BUTTON_PRESS_DET | MBHC_BUTTON_RELEASE_DET;
> -
> -	snd_soc_update_bits(codec, CDC_D_INT_EN_CLR, int_en_mask, 0);
> -	snd_soc_update_bits(codec, CDC_D_INT_EN_SET, int_en_mask, int_en_mask);
> -	wcd->mbhc_btn0_released = false;
> -	wcd->detect_accessory_type = true;
> -}
> -
>   static int pm8916_mbhc_configure_bias(struct pm8916_wcd_analog_priv *priv,
>   				      bool micbias2_enabled)
>   {
> @@ -534,6 +490,56 @@ static int pm8916_mbhc_configure_bias(struct pm8916_wcd_analog_priv *priv,
>   	return 0;
>   }
>   
> +static void pm8916_wcd_setup_mbhc(struct pm8916_wcd_analog_priv *wcd)
> +{
> +	struct snd_soc_codec *codec = wcd->codec;
> +	bool micbias_enabled = false;
> +	u32 plug_type = 0;
> +	u32 int_en_mask;
> +
> +	snd_soc_write(codec, CDC_A_MBHC_DET_CTL_1,
> +		      CDC_A_MBHC_DET_CTL_L_DET_EN |
> +		      CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_INSERTION |
> +		      CDC_A_MBHC_DET_CTL_MIC_CLAMP_CTL_AUTO |
> +		      CDC_A_MBHC_DET_CTL_MBHC_BIAS_EN);
> +
> +	if (wcd->hphl_jack_type_normally_open)
> +		plug_type |= CDC_A_HPHL_PLUG_TYPE_NO;
> +
> +	if (wcd->gnd_jack_type_normally_open)
> +		plug_type |= CDC_A_GND_PLUG_TYPE_NO;
> +
> +	snd_soc_write(codec, CDC_A_MBHC_DET_CTL_2,
> +		      CDC_A_MBHC_DET_CTL_HS_L_DET_PULL_UP_CTRL_I_3P0 |
> +		      CDC_A_MBHC_DET_CTL_HS_L_DET_COMPA_CTRL_V0P9_VDD |
> +		      plug_type |
> +		      CDC_A_MBHC_DET_CTL_HPHL_100K_TO_GND_EN);
> +
> +
> +	snd_soc_write(codec, CDC_A_MBHC_DBNC_TIMER,
> +		      CDC_A_MBHC_DBNC_TIMER_INSREM_DBNC_T_256_MS |
> +		      CDC_A_MBHC_DBNC_TIMER_BTN_DBNC_T_16MS);
> +
> +	/* enable MBHC clock */
> +	snd_soc_update_bits(codec, CDC_D_CDC_DIG_CLK_CTL,
> +			    DIG_CLK_CTL_D_MBHC_CLK_EN_MASK,
> +			    DIG_CLK_CTL_D_MBHC_CLK_EN);
> +
> +	if (snd_soc_read(codec, CDC_A_MICB_2_EN) & CDC_A_MICB_2_EN_ENABLE)
> +		micbias_enabled = true;
> +
> +	pm8916_mbhc_configure_bias(wcd, micbias_enabled);
> +
> +	int_en_mask = MBHC_SWITCH_INT;
> +	if (wcd->mbhc_btn_enabled)
> +		int_en_mask |= MBHC_BUTTON_PRESS_DET | MBHC_BUTTON_RELEASE_DET;
> +
> +	snd_soc_update_bits(codec, CDC_D_INT_EN_CLR, int_en_mask, 0);
> +	snd_soc_update_bits(codec, CDC_D_INT_EN_SET, int_en_mask, int_en_mask);
> +	wcd->mbhc_btn0_released = false;
> +	wcd->detect_accessory_type = true;
> +}
> +
>   static int pm8916_wcd_analog_enable_micbias_int2(struct
>   						  snd_soc_dapm_widget
>   						  *w, struct snd_kcontrol
> 

  reply	other threads:[~2017-10-03 20:42 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-03 13:27 Damien Riegel
2017-10-03 20:42 ` Srinivas Kandagatla [this message]
2017-10-03 20:49   ` Srinivas Kandagatla
2017-10-03 20:53   ` Damien Riegel
2017-10-04 11:28 ` Applied "ASoC: codecs: msm8916-wcd-analog: configure micbias in mbhc setup" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d832c3e0-8d39-5880-3210-9b06d2d6ceb8@linaro.org \
    --to=srinivas.kandagatla@linaro.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=damien.riegel@savoirfairelinux.com \
    --cc=kernel@savoirfairelinux.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®