Re: [PATCH v2 3/3] drm/panel-edp: Allow querying the detected panel via debugfs

[Javier Martinez Canillas <javierm@redhat.com>]

On 2/5/22 01:13, Douglas Anderson wrote:
> Recently we added generic "edp-panel"s probed by EDID. To support
> panels in this way we look at the panel ID in the EDID and look up the
> panel in a table that has power sequence timings. If we find a panel
> that's not in the table we will still attempt to use it but we'll use
> conservative timings. While it's likely that these conservative
> timings will work for most nearly all panels, the performance of
> turning the panel off and on suffers.
> 
> We'd like to be able to reliably detect the case that we're using the
> hardcoded timings without relying on parsing dmesg. This allows us to
> implement tests that ensure that no devices get shipped that are
> relying on the conservative timings.
> 
> Let's add a new debugfs entry to panel devices. It will have one of:
> * UNKNOWN - We tried to detect a panel but it wasn't in our table.
> * HARDCODED - We're not using generic "edp-panel" probed by EDID.
> * A panel name - This is the name of the panel from our table.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>

Best regards,
-- 
Javier Martinez Canillas
Linux Engineering
Red Hat