Re: [PATCH v2 1/5] dt-bindings: gpio: Add HPE GXP GPIO

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 31/05/2023 17:19, nick.hawkins@hpe.com wrote:
> From: Nick Hawkins <nick.hawkins@hpe.com>
> 
> Provide access to the register regions and interrupt for GPIO. There
> will be two drivers available. The first driver under the hpe,gxp-gpio
> binding will provide GPIO information for the VUHC, CSM, and FN2
> host interfaces. The second driver under the hpe,gxp-gpio-pl will
> provide GPIO information from the CPLD interface. The main difference
> and need for two separate bindings is they have different interrupt
> parents. The other is hpe,gxp-gpio is a combination of physical
> and virtual GPIOs where as hpe,gxp-gpio-pl are all physical
> GPIOs from the CPLD.
> 
> Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
> 
> ---
> 
> v2:
>  *Put binding patch before the driver in the series
>  *Improved patch description
>  *Removed oneOf and items in compatible definition
>  *Moved additionalProperties definition to correct spot in file
>  *Fixed indentation on example

I don't think it was fixed.

>  *Improved description in .yaml
> ---
>  .../bindings/gpio/hpe,gxp-gpio.yaml           | 190 ++++++++++++++++++
>  1 file changed, 190 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/hpe,gxp-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/gpio/hpe,gxp-gpio.yaml b/Documentation/devicetree/bindings/gpio/hpe,gxp-gpio.yaml
> new file mode 100644
> index 000000000000..b92b7d72d39b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/hpe,gxp-gpio.yaml
> @@ -0,0 +1,190 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/hpe,gxp-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HPE GXP gpio controllers
> +
> +maintainers:
> +  - Nick Hawkins <nick.hawkins@hpe.com>
> +
> +description:
> +  Interruptable GPIO drivers for the HPE GXP that covers multiple interfaces
> +  of both physical and virtual GPIO pins.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - hpe,gxp-gpio
> +      - hpe,gxp-gpio-pl
> +
> +  reg:
> +    minItems: 2
> +    maxItems: 6
> +
> +  reg-names:
> +    minItems: 2
> +    maxItems: 6
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  gpio-line-names:
> +    minItems: 80
> +    maxItems: 300
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - gpio-controller
> +  - "#gpio-cells"
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - hpe,gxp-gpio
> +    then:
> +      properties:
> +        reg:
> +          items:
> +            - description: CSM GPIO interface
> +            - description: fn2 virtual button GPIO
> +            - description: fn2 system status GPIO
> +            - description: vuhc GPIO status interface
> +        reg-names:
> +          items:
> +            - const: csm
> +            - const: fn2-vbtn
> +            - const: fn2-stat
> +            - const: vuhc
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - hpe,gxp-gpio-pl
> +    then:
> +      properties:
> +        reg:
> +          items:
> +            - description: Programmable logic device GPIO
> +            - description: Programmable logic device interrupt GPIO
> +        reg-names:
> +          items:
> +            - const: base
> +            - const: interrupt
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    gpio@0 {
> +        compatible = "hpe,gxp-gpio";
> +        reg = <0x0 0x400>, <0x200046 0x1>, <0x200070 0x08>, <0x400064 0x80>;
> +        reg-names = "csm", "fn2-vbtn", "fn2-stat", "vuhc";
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        interrupt-parent = <&vic0>;
> +        interrupts = <10>;
> +        gpio-line-names = "IOP_LED1", "IOP_LED2",
> +        "IOP_LED3", "IOP_LED4",

Broken indentation. This is aligned with opening " in previous line.

> +        "IOP_LED5", "IOP_LED6",
> +        "IOP_LED7", "IOP_LED8",
> +        "FAN1_INST", "FAN2_INST",
> +        "FAN3_INST", "FAN4_INST",
> +        "FAN5_INST", "FAN6_INST",
> +        "FAN7_INST", "FAN8_INST",
> +        "FAN1_FAIL", "FAN2_FAIL",
> +        "FAN3_FAIL", "FAN4_FAIL",
> +        "FAN5_FAIL", "FAN6_FAIL",
> +        "FAN7_FAIL", "FAN8_FAIL",
> +        "FAN1_ID", "FAN2_ID",
> +        "FAN3_ID", "FAN4_ID",
> +        "FAN5_ID", "FAN6_ID",
> +        "FAN7_ID", "FAN8_ID",
> +        "IDENTIFY", "HEALTH_RED",
> +        "HEALTH_AMBER", "POWER_BUTTON",
> +        "UID_PRESS", "SLP",
> +        "NMI_BUTTON", "RESET_BUTTON",
> +        "SIO_S5", "SO_ON_CONTROL",
> +        "PSU1_INST", "PSU2_INST",
> +        "PSU3_INST", "PSU4_INST",
> +        "PSU5_INST", "PSU6_INST",
> +        "PSU7_INST", "PSU8_INST",
> +        "PSU1_AC", "PSU2_AC",
> +        "PSU3_AC", "PSU4_AC",
> +        "PSU5_AC", "PSU6_AC",
> +        "PSU7_AC", "PSU8_AC",
> +        "PSU1_DC", "PSU2_DC",
> +        "PSU3_DC", "PSU4_DC",
> +        "PSU5_DC", "PSU6_DC",
> +        "PSU7_DC", "PSU8_DC",
> +        "", "",
> +        "", "",
> +        "", "",
> +        "", "",
> +        "", "",
> +        "", "",
> +        "", "";
> +    };
> +
> +  - |
> +    gpio@51000300 {
> +        compatible = "hpe,gxp-gpio-pl";
> +        reg = <0x51000300 0x40>, <0x51000380 0x10>;
> +        reg-names = "base", "interrupt";

One example is enough, because this almost does not differ from previous.

Best regards,
Krzysztof