Re: [PATCH v2 0/3]clk: at91: add sama7d65 clock support

[claudiu beznea <claudiu.beznea@tuxon.dev>]

Hi, Ryan,

Can you, please, re-submit this series and include also the dt-binding
patch, to follow the process highlighted in [1] ?

Thank you,
Claudiu Beznea

[1]
https://lore.kernel.org/lkml/20240829-sama7d65-next-v1-1-53d4e50b550d@microchip.com/

On 04.09.2024 18:54, Ryan.Wanner@microchip.com wrote:
> From: Ryan Wanner <Ryan.Wanner@microchip.com>
> 
> Hello,
> 
> This series adds clock support for the SAMA7D65 SoC. There are also
> changes to the master clock driver and PLL driver in order to account for
> the increased amount of clocks being supported in this new SoC.
> 
> Trying to account for all the updates happening in this system, this
> patch set is based off of the most recent updates to at91-next branch.
> 
> Changes in v2:
> - Correct PLL ID from PLL_ID_IMG to PLL_ID_GPU in the description.
> - Adjust master clock description to match amount of master clocks 0-9.
> - Correct bad spacing and bad alignment.
> - Remove double variable definition.
> - Add missing kfree() at end of function.
> - Reorganize clk and pll driver changes in patch set.
> 
> 
> Ryan Wanner (3):
>   clk: at91: clk-master: increase maximum number of clocks
>   clk: at91: clk-sam9x60-pll: increase maximum amount of plls
>   clk: at91: sama7d65: add sama7d65 pmc driver
> 
>  drivers/clk/at91/Makefile          |    1 +
>  drivers/clk/at91/clk-master.c      |    2 +-
>  drivers/clk/at91/clk-sam9x60-pll.c |    2 +-
>  drivers/clk/at91/pmc.c             |    1 +
>  drivers/clk/at91/sama7d65.c        | 1373 ++++++++++++++++++++++++++++
>  5 files changed, 1377 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/clk/at91/sama7d65.c
>