Re: [PATCH 2/3] RFC: dt-bindings: marvell: Rewrite in schema

[Andrew Lunn <andrew@lunn.ch>]

> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - marvell,mv88e6060

The 6060 is a separate driver. Its not part of mv88e6xxx. So it should
have a binding document of its own.

> +  '#interrupt-cells':
> +    description: The internal interrupt controller only supports triggering
> +      on IRQ_TYPE_LEVEL_HIGH
> +      # FIXME: what is this? this should be one cell should it not?
> +      # the Linux mv88e6xxx driver does not implement .irq_set_type in its irq_chip
> +      # so at least in that implementation the type is flat out ignored.
> +    const: 2

This interrupt controller is for the embedded PHYs. Its is hard wired
active high.

> +  mdio-external:
> +    $ref: /schemas/net/mdio.yaml#
> +    unevaluatedProperties: false
> +    description: Marvell MV88E6xxx switches have an external mdio bus to
> +      access switch ports.

This is used to access external PHYs attached to the ports, not the
ports themselves.

> +
> +  mdio1:
> +    $ref: /schemas/net/mdio.yaml#
> +    unevaluatedProperties: false
> +    description: Older version of mdio-external
> +    deprecated: true
> +    properties:
> +      compatible:
> +        const: marvell,mv88e6xxx-mdio-external

The driver only looks at the compatible. It does not care what the
node is called. So you are going to need to change the driver if you
want this in the schema.

     Andrew