From: "Markus Rechberger" <mrechberger@gmail.com>
To: "Greg KH" <greg@kroah.com>
Cc: "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
em28xx <em28xx@mcentral.de>,
acano@fastmail.fm, "Andre Kelmanson" <akelmanson@gmail.com>,
"Bouwsma Barry" <freebeer.bouwsma@gmail.com>,
"Dan Kreiser" <kreiser@informatik.hu-berlin.de>,
"Frank Neuber" <fn@kernelport.de>,
"Jelle de Jong" <jelledejong@powercraft.nl>,
"John Stowers" <john.stowers.lists@gmail.com>,
"Lukas Kuna" <lukas.kuna@evkanet.net>,
"Stefan Vonolfen" <stefan.vonolfen@gmail.com>,
"Stephan Berberig" <s.berberig@arcor.de>,
"Thomas Giesecke" <thomas.giesecke@ibgmbh-naumburg.de>,
"Vitaly Wool" <vwool@ru.mvista.com>,
"Zhenyu Wang" <zhen78@gmail.com>
Subject: Re: [PATCH 1/7] Adding empia base driver
Date: Thu, 23 Oct 2008 00:26:15 +0200 [thread overview]
Message-ID: <d9def9db0810221526w5c95b6f1gb5a8de58eb6910a6@mail.gmail.com> (raw)
In-Reply-To: <d9def9db0810221524m738b838bs681c0b9159531c64@mail.gmail.com>
On Thu, Oct 23, 2008 at 12:24 AM, Markus Rechberger
<mrechberger@gmail.com> wrote:
> On Thu, Oct 23, 2008 at 12:09 AM, Greg KH <greg@kroah.com> wrote:
>> On Wed, Oct 22, 2008 at 11:14:36PM +0200, Markus Rechberger wrote:
>>> em2880-dvb:
>>> * supporting the digital part of Empia based devices, which
>>> includes ATSC, ISDB-T and DVB-T
>>
>> <snip>
>>
>> Doesn't this driver duplicate some of the existing devices we already
>> support with the current in-kernel driver? If so, why not just add the
>> new device support to the existing driver instead of duplicating
>> everything?
>>
>> This is going to cause a big problem for distros as they will not know
>> which to enable, so they will probably just disable this one, which is
>> what I don't think you want to have happen :(
>>
>
> the current driver doesn't support most devices which are in there,
> also the alsa
> audio driver can easily crash the whole system. (It's my code so I
> know what was wrong there).
>
since the USB IDs were taken from the driver from mcentral.de without
testing them at all.
> The core video code is already too much off, the VBI code added alot complexity
> to it it does frame slicing on the fly.
>
> Those devices ship VBI+VIDEO within 1 datastream, VBI and Video aren't
> that different
> in the system. both interfaces provide framebuffers through a mmap'ed interface.
> If all the VBI buffers are filled the data has to be sliced off in any
> case while providing
> the same bottom data ot the Video interface
>
> http://mcentral.de/hg/~mrec/em28xx-new/shortlog (there are more than
> 200 changelog entries
> what happened in detail).
>
> The development has been split off (first due limitations in the
> kernel, afterwards due ..., and finally
> due the restriction that all that has to work without a framework
> upgrade on the eeePC).
>
> diffing the 2 available drivers shows up that only the core is twice
> as big as the one which is currently
> in the driver (the result of 2-3 years asynchronous development).
>
> The driver is currently also tested with signal generators (different
> inputs, and different video standards).
>
> Very likely the best would be to replace the available driver with it
> but I don't care, alot people use and have been using the driver from
> mcentral.de for a long time, development has always been opensource
> there too.
>
> regards,
> Markus
>
next prev parent reply other threads:[~2008-10-22 22:26 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-22 21:14 Markus Rechberger
2008-10-22 22:09 ` Greg KH
2008-10-22 22:24 ` Markus Rechberger
2008-10-22 22:26 ` Markus Rechberger [this message]
2008-10-22 22:27 ` Greg KH
2008-10-22 22:35 ` Markus Rechberger
2008-10-22 22:49 ` Greg KH
2008-10-23 8:53 ` el es
2008-11-26 19:12 ` Aidan Thornton
2008-11-27 4:25 ` Markus Rechberger
2008-11-27 9:33 ` Pekka Enberg
2008-11-28 15:48 ` Devin Heitmueller
2008-11-28 20:09 ` Greg KH
2008-11-30 6:23 ` Markus Rechberger
2008-10-23 9:29 ` Alan Cox
2008-10-23 11:10 ` Markus Rechberger
2008-11-01 13:59 ` Hans Verkuil
2008-11-02 4:27 ` Mauro Carvalho Chehab
[not found] ` <a2aa6e3a0811072150t535e802cge3375a7b88ee6287@mail.gmail.com>
2008-11-08 10:15 ` Mauro Carvalho Chehab
2008-11-08 10:22 ` Markus Rechberger
2008-11-08 10:37 ` Mauro Carvalho Chehab
2008-11-08 10:42 ` Markus Rechberger
2008-11-08 10:46 ` Markus Rechberger
2008-11-08 10:56 ` Mauro Carvalho Chehab
2008-11-08 11:02 ` Markus Rechberger
2008-11-26 20:36 ` Aidan Thornton
[not found] <d9def9db0810221359h5118b8d2pd6d2b3f4f95496ce@mail.gmail.com>
[not found] ` <20081024153509.0f51d676@pedra.chehab.org>
2008-10-24 20:15 ` Markus Rechberger
2008-10-24 20:20 ` Markus Rechberger
2008-11-01 14:05 Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d9def9db0810221526w5c95b6f1gb5a8de58eb6910a6@mail.gmail.com \
--to=mrechberger@gmail.com \
--cc=acano@fastmail.fm \
--cc=akelmanson@gmail.com \
--cc=em28xx@mcentral.de \
--cc=fn@kernelport.de \
--cc=freebeer.bouwsma@gmail.com \
--cc=greg@kroah.com \
--cc=jelledejong@powercraft.nl \
--cc=john.stowers.lists@gmail.com \
--cc=kreiser@informatik.hu-berlin.de \
--cc=linux-kernel@vger.kernel.org \
--cc=lukas.kuna@evkanet.net \
--cc=s.berberig@arcor.de \
--cc=stefan.vonolfen@gmail.com \
--cc=thomas.giesecke@ibgmbh-naumburg.de \
--cc=vwool@ru.mvista.com \
--cc=zhen78@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®