mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: George Cherian <gcherian@caviumnetworks.com>
To: "Prakash, Prashanth" <pprakash@codeaurora.org>,
	George Cherian <george.cherian@cavium.com>,
	devel@acpica.org, linux-kernel@vger.kernel.org,
	linux-acpi@vger.kernel.org
Cc: lv.zheng@intel.com, robert.moore@intel.com,
	jassisinghbrar@gmail.com, lenb@kernel.org, rjw@rjwysocki.net
Subject: Re: [PATCH v4 2/2] ACPI / CPPC: Make cppc acpi driver aware of pcc subspace ids
Date: Wed, 11 Oct 2017 14:26:42 +0530	[thread overview]
Message-ID: <d9fef65a-527b-11cc-aed7-706b99846083@caviumnetworks.com> (raw)
In-Reply-To: <54c0a799-0cf6-3ba3-c137-7a5c35012654@codeaurora.org>


Thanks Prakash for the clarifications.
I have updated the patch set incorporating your comments and posted v5.

Regards
-George

On 10/07/2017 02:40 AM, Prakash, Prashanth wrote:
> 
> On 10/3/2017 5:01 AM, George Cherian wrote:
>> Hi Prakash,
>>
>> On 09/29/2017 04:49 AM, Prakash, Prashanth wrote:
>>> Hi George,
>>>
>>> On 9/19/2017 11:24 PM, George Cherian wrote:
>>>> Based on ACPI 6.2 Section 8.4.7.1.9 If the PCC register space is used,
>>>> all PCC registers, for all processors in the same performance
>>>> domain (as defined by _PSD), must be defined to be in the same subspace.
>>>> Based on Section 14.1 of ACPI specification, it is possible to have a
>>>> maximum of 256 PCC subspace ids. Add support of multiple PCC subspace id
>>>> instead of using a single global pcc_data structure.
>>>>
>>>> While at that fix the time_delta check in send_pcc_cmd() so that last_mpar_reset
>>>> and mpar_count is initialized properly.
>>>>
>>>> Signed-off-by: George Cherian <george.cherian@cavium.com>
>>>> ---
>>>>    drivers/acpi/cppc_acpi.c | 243 +++++++++++++++++++++++++++++------------------
>>>>    1 file changed, 153 insertions(+), 90 deletions(-)
>>>>
>>>> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
>>>> index e5b47f0..3ae79ef 100644
>>>> --- a/drivers/acpi/cppc_acpi.c
>>>> +++ b/drivers/acpi/cppc_acpi.c
>>>> @@ -75,13 +75,16 @@ struct cppc_pcc_data {
>>>>          /* Wait queue for CPUs whose requests were batched */
>>>>        wait_queue_head_t pcc_write_wait_q;
>>>> +    ktime_t last_cmd_cmpl_time;
>>>> +    ktime_t last_mpar_reset;
>>>> +    int mpar_count;
>>>> +    int refcount;
>>>>    };
>>>>    -/* Structure to represent the single PCC channel */
>>>> -static struct cppc_pcc_data pcc_data = {
>>>> -    .pcc_subspace_idx = -1,
>>>> -    .platform_owns_pcc = true,
>>>> -};
>>>> +/* Array  to represent the PCC channel per subspace id */
>>>> +static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES];
>>>> +/* The cpu_pcc_subspace_idx containsper CPU subspace id */
>>>> +static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx);
>>>>      /*
>>>>     * The cpc_desc structure contains the ACPI register details
>>>> @@ -93,7 +96,8 @@ static struct cppc_pcc_data pcc_data = {
>>>>    static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
>>>>      /* pcc mapped address + header size + offset within PCC subspace */
>>>> -#define GET_PCC_VADDR(offs) (pcc_data.pcc_comm_addr + 0x8 + (offs))
>>>> +#define GET_PCC_VADDR(offs, pcc_ss_id) (pcc_data[pcc_ss_id]->pcc_comm_addr + \
>>>> +                        0x8 + (offs))
>>>>      /* Check if a CPC register is in PCC */
>>>>    #define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER &&        \
>>>> @@ -188,13 +192,16 @@ static struct kobj_type cppc_ktype = {
>>>>        .default_attrs = cppc_attrs,
>>>>    };
>>>>    -static int check_pcc_chan(bool chk_err_bit)
>>>> +static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit)
>>>>    {
>>>>        int ret = -EIO, status = 0;
>>>> -    struct acpi_pcct_shared_memory __iomem *generic_comm_base = pcc_data.pcc_comm_addr;
>>>> -    ktime_t next_deadline = ktime_add(ktime_get(), pcc_data.deadline);
>>>> +    struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
>>>> +    struct acpi_pcct_shared_memory __iomem *generic_comm_base =
>>>> +        pcc_ss_data->pcc_comm_addr;
>>>> +    ktime_t next_deadline = ktime_add(ktime_get(),
>>>> +                      pcc_ss_data->deadline);
>>>>    -    if (!pcc_data.platform_owns_pcc)
>>>> +    if (!pcc_ss_data->platform_owns_pcc)
>>>>            return 0;
>>>>          /* Retry in case the remote processor was too slow to catch up. */
>>>> @@ -219,7 +226,7 @@ static int check_pcc_chan(bool chk_err_bit)
>>>>        }
>>>>          if (likely(!ret))
>>>> -        pcc_data.platform_owns_pcc = false;
>>>> +        pcc_ss_data->platform_owns_pcc = false;
>>>>        else
>>>>            pr_err("PCC check channel failed. Status=%x\n", status);
>>>>    @@ -230,13 +237,12 @@ static int check_pcc_chan(bool chk_err_bit)
>>>>     * This function transfers the ownership of the PCC to the platform
>>>>     * So it must be called while holding write_lock(pcc_lock)
>>>>     */
>>>> -static int send_pcc_cmd(u16 cmd)
>>>> +static int send_pcc_cmd(int pcc_ss_id, u16 cmd)
>>>>    {
>>>>        int ret = -EIO, i;
>>>> +    struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
>>>>        struct acpi_pcct_shared_memory *generic_comm_base =
>>>> -        (struct acpi_pcct_shared_memory *) pcc_data.pcc_comm_addr;
>>>> -    static ktime_t last_cmd_cmpl_time, last_mpar_reset;
>>>> -    static int mpar_count;
>>>> +        (struct acpi_pcct_shared_memory *)pcc_ss_data->pcc_comm_addr;
>>>>        unsigned int time_delta;
>>>>          /*
>>>> @@ -249,24 +255,25 @@ static int send_pcc_cmd(u16 cmd)
>>>>             * before write completion, so first send a WRITE command to
>>>>             * platform
>>>>             */
>>>> -        if (pcc_data.pending_pcc_write_cmd)
>>>> -            send_pcc_cmd(CMD_WRITE);
>>>> +        if (pcc_ss_data->pending_pcc_write_cmd)
>>>> +            send_pcc_cmd(pcc_ss_id, CMD_WRITE);
>>>>    -        ret = check_pcc_chan(false);
>>>> +        ret = check_pcc_chan(pcc_ss_id, false);
>>>>            if (ret)
>>>>                goto end;
>>>>        } else /* CMD_WRITE */
>>>> -        pcc_data.pending_pcc_write_cmd = FALSE;
>>>> +        pcc_ss_data->pending_pcc_write_cmd = FALSE;
>>>>          /*
>>>>         * Handle the Minimum Request Turnaround Time(MRTT)
>>>>         * "The minimum amount of time that OSPM must wait after the completion
>>>>         * of a command before issuing the next command, in microseconds"
>>>>         */
>>>> -    if (pcc_data.pcc_mrtt) {
>>>> -        time_delta = ktime_us_delta(ktime_get(), last_cmd_cmpl_time);
>>>> -        if (pcc_data.pcc_mrtt > time_delta)
>>>> -            udelay(pcc_data.pcc_mrtt - time_delta);
>>>> +    if (pcc_ss_data->pcc_mrtt) {
>>>> +        time_delta = ktime_us_delta(ktime_get(),
>>>> +                        pcc_ss_data->last_cmd_cmpl_time);
>>>> +        if (pcc_ss_data->pcc_mrtt > time_delta)
>>>> +            udelay(pcc_ss_data->pcc_mrtt - time_delta);
>>>>        }
>>>>          /*
>>>> @@ -280,18 +287,19 @@ static int send_pcc_cmd(u16 cmd)
>>>>         * not send the request to the platform after hitting the MPAR limit in
>>>>         * any 60s window
>>>>         */
>>>> -    if (pcc_data.pcc_mpar) {
>>>> -        if (mpar_count == 0) {
>>>> -            time_delta = ktime_ms_delta(ktime_get(), last_mpar_reset);
>>>> -            if (time_delta < 60 * MSEC_PER_SEC) {
>>>> +    if (pcc_ss_data->pcc_mpar) {
>>>> +        if (pcc_ss_data->mpar_count == 0) {
>>>> +            time_delta = ktime_ms_delta(ktime_get(),
>>>> +                            pcc_ss_data->last_mpar_reset);
>>>> +            if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) {
>>>>                    pr_debug("PCC cmd not sent due to MPAR limit");
>>>>                    ret = -EIO;
>>>>                    goto end;
>>>>                }
>>>> -            last_mpar_reset = ktime_get();
>>>> -            mpar_count = pcc_data.pcc_mpar;
>>>> +            pcc_ss_data->last_mpar_reset = ktime_get();
>>>> +            pcc_ss_data->mpar_count = pcc_ss_data->pcc_mpar;
>>>>            }
>>>> -        mpar_count--;
>>>> +        pcc_ss_data->mpar_count--;
>>>>        }
>>>>          /* Write to the shared comm region. */
>>>> @@ -300,10 +308,10 @@ static int send_pcc_cmd(u16 cmd)
>>>>        /* Flip CMD COMPLETE bit */
>>>>        writew_relaxed(0, &generic_comm_base->status);
>>>>    -    pcc_data.platform_owns_pcc = true;
>>>> +    pcc_ss_data->platform_owns_pcc = true;
>>>>          /* Ring doorbell */
>>>> -    ret = mbox_send_message(pcc_data.pcc_channel, &cmd);
>>>> +    ret = mbox_send_message(pcc_ss_data->pcc_channel, &cmd);
>>>>        if (ret < 0) {
>>>>            pr_err("Err sending PCC mbox message. cmd:%d, ret:%d\n",
>>>>                    cmd, ret);
>>>> @@ -311,15 +319,15 @@ static int send_pcc_cmd(u16 cmd)
>>>>        }
>>>>          /* wait for completion and check for PCC errro bit */
>>>> -    ret = check_pcc_chan(true);
>>>> +    ret = check_pcc_chan(pcc_ss_id, true);
>>>>    -    if (pcc_data.pcc_mrtt)
>>>> -        last_cmd_cmpl_time = ktime_get();
>>>> +    if (pcc_ss_data->pcc_mrtt)
>>>> +        pcc_ss_data->last_cmd_cmpl_time = ktime_get();
>>>>    -    if (pcc_data.pcc_channel->mbox->txdone_irq)
>>>> -        mbox_chan_txdone(pcc_data.pcc_channel, ret);
>>>> +    if (pcc_ss_data->pcc_channel->mbox->txdone_irq)
>>>> +        mbox_chan_txdone(pcc_ss_data->pcc_channel, ret);
>>>>        else
>>>> -        mbox_client_txdone(pcc_data.pcc_channel, ret);
>>>> +        mbox_client_txdone(pcc_ss_data->pcc_channel, ret);
>>>>      end:
>>>>        if (cmd == CMD_WRITE) {
>>>> @@ -329,12 +337,12 @@ static int send_pcc_cmd(u16 cmd)
>>>>                    if (!desc)
>>>>                        continue;
>>>>    -                if (desc->write_cmd_id == pcc_data.pcc_write_cnt)
>>>> +                if (desc->write_cmd_id == pcc_ss_data->pcc_write_cnt)
>>>>                        desc->write_cmd_status = ret;
>>>>                }
>>>>            }
>>>> -        pcc_data.pcc_write_cnt++;
>>>> -        wake_up_all(&pcc_data.pcc_write_wait_q);
>>>> +        pcc_ss_data->pcc_write_cnt++;
>>>> +        wake_up_all(&pcc_ss_data->pcc_write_wait_q);
>>>>        }
>>>>          return ret;
>>>> @@ -536,16 +544,16 @@ int acpi_get_psd_map(struct cppc_cpudata **all_cpu_data)
>>>>    }
>>>>    EXPORT_SYMBOL_GPL(acpi_get_psd_map);
>>>>    -static int register_pcc_channel(int pcc_subspace_idx)
>>>> +static int register_pcc_channel(int pcc_ss_idx)
>>>>    {
>>>>        struct acpi_pcct_hw_reduced *cppc_ss;
>>>>        u64 usecs_lat;
>>>>    -    if (pcc_subspace_idx >= 0) {
>>>> -        pcc_data.pcc_channel = pcc_mbox_request_channel(&cppc_mbox_cl,
>>>> -                pcc_subspace_idx);
>>>> +    if (pcc_ss_idx >= 0) {
>>>> +        pcc_data[pcc_ss_idx]->pcc_channel =
>>>> +            pcc_mbox_request_channel(&cppc_mbox_cl,    pcc_ss_idx);
>>>>    -        if (IS_ERR(pcc_data.pcc_channel)) {
>>>> +        if (IS_ERR(pcc_data[pcc_ss_idx]->pcc_channel)) {
>>>>                pr_err("Failed to find PCC communication channel\n");
>>>>                return -ENODEV;
>>>>            }
>>>> @@ -556,7 +564,7 @@ static int register_pcc_channel(int pcc_subspace_idx)
>>>>             * PCC channels) and stored pointers to the
>>>>             * subspace communication region in con_priv.
>>>>             */
>>>> -        cppc_ss = (pcc_data.pcc_channel)->con_priv;
>>>> +        cppc_ss = (pcc_data[pcc_ss_idx]->pcc_channel)->con_priv;
>>>>              if (!cppc_ss) {
>>>>                pr_err("No PCC subspace found for CPPC\n");
>>>> @@ -569,19 +577,20 @@ static int register_pcc_channel(int pcc_subspace_idx)
>>>>             * So add an arbitrary amount of wait on top of Nominal.
>>>>             */
>>>>            usecs_lat = NUM_RETRIES * cppc_ss->latency;
>>>> -        pcc_data.deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC);
>>>> -        pcc_data.pcc_mrtt = cppc_ss->min_turnaround_time;
>>>> -        pcc_data.pcc_mpar = cppc_ss->max_access_rate;
>>>> -        pcc_data.pcc_nominal = cppc_ss->latency;
>>>> -
>>>> -        pcc_data.pcc_comm_addr = acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length);
>>>> -        if (!pcc_data.pcc_comm_addr) {
>>>> +        pcc_data[pcc_ss_idx]->deadline = ns_to_ktime(usecs_lat * NSEC_PER_USEC);
>>>> +        pcc_data[pcc_ss_idx]->pcc_mrtt = cppc_ss->min_turnaround_time;
>>>> +        pcc_data[pcc_ss_idx]->pcc_mpar = cppc_ss->max_access_rate;
>>>> +        pcc_data[pcc_ss_idx]->pcc_nominal = cppc_ss->latency;
>>>> +
>>>> +        pcc_data[pcc_ss_idx]->pcc_comm_addr =
>>>> +            acpi_os_ioremap(cppc_ss->base_address, cppc_ss->length);
>>>> +        if (!pcc_data[pcc_ss_idx]->pcc_comm_addr) {
>>>>                pr_err("Failed to ioremap PCC comm region mem\n");
>>>>                return -ENOMEM;
>>>>            }
>>>>              /* Set flag so that we dont come here for each CPU. */
>>>> -        pcc_data.pcc_channel_acquired = true;
>>>> +        pcc_data[pcc_ss_idx]->pcc_channel_acquired = true;
>>>>        }
>>>>          return 0;
>>>> @@ -600,6 +609,39 @@ bool __weak cpc_ffh_supported(void)
>>>>        return false;
>>>>    }
>>>>    +
>>>> +/**
>>>> + * pcc_data_alloc() - Allocate the pcc_data memory for pcc subspace
>>>> + *
>>>> + * Check and allocate the cppc_pcc_data memory.
>>>> + * In some processor configurations it is possible that same subspace
>>>> + * is shared between multiple CPU's. This is seen especially in CPU's
>>>> + * with hardware multi-threading support.
>>>> + *
>>>> + * Return: 0 for success, errno for failure
>>>> + */
>>>> +int pcc_data_alloc(int pcc_ss_id)
>>>> +{
>>>> +    int loop;
>>>> +
>>>> +    if (pcc_ss_id < 0)
>>> Above should be (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES)
>> Yes we can have this additional check.
>>>> +        return -EINVAL;
>>>> +
>>>> +    for (loop = 0; pcc_data[loop] != NULL; loop++) {
>>>> +        if (pcc_data[loop]->pcc_subspace_idx == pcc_ss_id) {
>>>> +            pcc_data[loop]->refcount++;
>>>> +            return 0;
>>>> +        }
>>>> +    }
>>> Why do we need the above for loop? can't it be direct array lookup?
>>> if (pcc_data[pcc_ss_id]) {
>>>       //increment ref_count and return
>>> }
>> Yes, we could get rid of the loop and increment the reference directly if already allocated.
>>
>>>
>>> Also, we should remove the pcc_subspace_idx from cppc_pcc_data structure,
>>> it is no longer useful and probably adds to confusion.
>> Please see below
>>>> +
>>>> +    pcc_data[pcc_ss_id] = kzalloc(sizeof(struct cppc_pcc_data), GFP_KERNEL);
>>>> +    if (!pcc_data[pcc_ss_id])
>>>> +        return -ENOMEM;
>>>> +    pcc_data[pcc_ss_id]->pcc_subspace_idx = pcc_ss_id;
>>>> +    pcc_data[pcc_ss_id]->refcount++;
>>>> +
>>>> +    return 0;
>>>> +}
>>>>    /*
>>>>     * An example CPC table looks like the following.
>>>>     *
>>>> @@ -661,6 +703,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr)
>>>>        struct device *cpu_dev;
>>>>        acpi_handle handle = pr->handle;
>>>>        unsigned int num_ent, i, cpc_rev;
>>>> +    int pcc_subspace_id = -1;
>>>>        acpi_status status;
>>>>        int ret = -EFAULT;
>>>>    @@ -733,12 +776,9 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr)
>>>>                 * so extract it only once.
>>>>                 */
>>>>                if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
>>>> -                if (pcc_data.pcc_subspace_idx < 0)
>>>> -                    pcc_data.pcc_subspace_idx = gas_t->access_width;
>>>> -                else if (pcc_data.pcc_subspace_idx != gas_t->access_width) {
>>>> -                    pr_debug("Mismatched PCC ids.\n");
>>> We need to retain the above checks to make sure all PCC registers
>>> within a _CPC package is under same subspace. The Spec still requires:
>>> "If the PCC register space is used, all PCC registers, for all processors in
>>> the same performance domain (as defined by _PSD), must be defined
>>> to be in the same subspace."
>>
>> So that means we need to maintain the pcc_subspace_idx in cppc_pcc_data.
>> If so, then I can move the check inside pcc_data_alloc().
> We need the pcc_subspace_idx for checking only withing the context of this
> function, so tracking that data in a local variable will be sufficient.
>>>
>>>> +                pcc_subspace_id = gas_t->access_width;
>>>> +                if (pcc_data_alloc(pcc_subspace_id))
>>>>                        goto out_free;
>>> We need to call pcc_data_alloc(to increment the reference) only once per CPU,
>>> otherwise acpi_cppc_processor_exit( ) will never free the memory allocated in
>>> pcc_data.
>>
>> It is infact called only once per CPU, The refcounting was added in case if multiple CPU's share the same domain for eg:
>> In instances, where CPU have hardware multi-threading support.
>> or in cases where all CPU's are controlled using single subspace (as earlier).
> No, it is getting called for every PCC registers within a _CPC package, instead it
> needs to be called only once per _CPC package irrespective of number of PCC
> registers within the_CPC  package.
>>
>> Do you see any issue with acpi_cppc_processor_exit() in the earlier cases, where refcount remains > 0 and the memory not getting freed-up?
>>>
>>>
>>> -- 
>>> Thanks,
>>> Prashanth
>>>
> 

      reply	other threads:[~2017-10-11  8:57 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-20  5:24 [PATCH v4 0/2] " George Cherian
2017-09-20  5:24 ` [PATCH v4 1/2] mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header file George Cherian
2017-09-20  5:24 ` [PATCH v4 2/2] ACPI / CPPC: Make cppc acpi driver aware of pcc subspace ids George Cherian
2017-09-28 23:19   ` Prakash, Prashanth
2017-10-03 11:01     ` George Cherian
2017-10-06 21:10       ` Prakash, Prashanth
2017-10-11  8:56         ` George Cherian [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d9fef65a-527b-11cc-aed7-706b99846083@caviumnetworks.com \
    --to=gcherian@caviumnetworks.com \
    --cc=devel@acpica.org \
    --cc=george.cherian@cavium.com \
    --cc=jassisinghbrar@gmail.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lv.zheng@intel.com \
    --cc=pprakash@codeaurora.org \
    --cc=rjw@rjwysocki.net \
    --cc=robert.moore@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®