From: Jose Abreu <jose.abreu@synopsys.com>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Jose Abreu <jose.abreu@synopsys.com>,
Joao Pinto <joao.pinto@synopsys.com>,
"David S . Miller" <davem@davemloft.net>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>
Subject: [PATCH net-next v3 2/3] net: stmmac: dwmac4: Also use TBU interrupt to clean TX path
Date: Tue, 19 Feb 2019 10:38:48 +0100 [thread overview]
Message-ID: <da5bd01dc41301c83d7f321a082a0b2973934a14.1550569066.git.joabreu@synopsys.com> (raw)
In-Reply-To: <cover.1550569066.git.joabreu@synopsys.com>
In-Reply-To: <cover.1550569066.git.joabreu@synopsys.com>
TBU interrupt is a normal interrupt and can be used to trigger the
cleaning of TX path. Lets check if it's active in DMA interrupt handler.
While at it, refactor a little bit the function:
- Don't check if RI is enabled because at function exit we will
only clear the interrupts that are enabled so, no event will be
missed.
In my tests with GMAC5 this increased performance.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c | 24 +++++++-----------------
1 file changed, 7 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
index 49f5687879df..545cb9c47433 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
@@ -124,9 +124,9 @@ void dwmac4_disable_dma_irq(void __iomem *ioaddr, u32 chan)
int dwmac4_dma_interrupt(void __iomem *ioaddr,
struct stmmac_extra_stats *x, u32 chan)
{
- int ret = 0;
-
u32 intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan));
+ u32 intr_en = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
+ int ret = 0;
/* ABNORMAL interrupts */
if (unlikely(intr_status & DMA_CHAN_STATUS_AIS)) {
@@ -151,16 +151,11 @@ int dwmac4_dma_interrupt(void __iomem *ioaddr,
if (likely(intr_status & DMA_CHAN_STATUS_NIS)) {
x->normal_irq_n++;
if (likely(intr_status & DMA_CHAN_STATUS_RI)) {
- u32 value;
-
- value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
- /* to schedule NAPI on real RIE event. */
- if (likely(value & DMA_CHAN_INTR_ENA_RIE)) {
- x->rx_normal_irq_n++;
- ret |= handle_rx;
- }
+ x->rx_normal_irq_n++;
+ ret |= handle_rx;
}
- if (likely(intr_status & DMA_CHAN_STATUS_TI)) {
+ if (likely(intr_status & (DMA_CHAN_STATUS_TI |
+ DMA_CHAN_STATUS_TBU))) {
x->tx_normal_irq_n++;
ret |= handle_tx;
}
@@ -168,12 +163,7 @@ int dwmac4_dma_interrupt(void __iomem *ioaddr,
x->rx_early_irq++;
}
- /* Clear the interrupt by writing a logic 1 to the chanX interrupt
- * status [21-0] expect reserved bits [5-3]
- */
- writel((intr_status & 0x3fffc7),
- ioaddr + DMA_CHAN_STATUS(chan));
-
+ writel(intr_status & intr_en, ioaddr + DMA_CHAN_STATUS(chan));
return ret;
}
--
2.7.4
next prev parent reply other threads:[~2019-02-19 9:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 9:38 [PATCH net-next v3 0/3] net: stmmac: Performance improvements in Multi-Queue Jose Abreu
2019-02-19 9:38 ` [PATCH net-next v3 1/3] net: stmmac: Fix NAPI poll in TX path when in multi-queue Jose Abreu
2019-02-19 9:38 ` Jose Abreu [this message]
2019-02-19 9:38 ` [PATCH net-next v3 3/3] net: stmmac: dwxgmac2: Also use TBU interrupt to clean TX path Jose Abreu
2019-02-21 23:42 ` [PATCH net-next v3 0/3] net: stmmac: Performance improvements in Multi-Queue David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=da5bd01dc41301c83d7f321a082a0b2973934a14.1550569066.git.joabreu@synopsys.com \
--to=jose.abreu@synopsys.com \
--cc=alexandre.torgue@st.com \
--cc=davem@davemloft.net \
--cc=joao.pinto@synopsys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®